kamillo1888

https://www.dropbox....qqod8v/DSDT.aml
Ths is my DSDT

Battery not working for me, installed AppleSmartBatteryManager.pkg, also not working, someone can help me with that?

Chipset: HM76
Processor Intel Core i5 1,7 with turbo to 2,6.

Bootloader is Clover. System ML.

Hello.
I am looking for someone who can help with patching AppleHDA.kext
I tried binary patching but my audio still not working.

------
Node 14 : Pin Default 0x90170110 , EAPD: 0x02			Speaker Playback Switch (Output)
Node 15 : Pin Default 0x03211020 , EAPD: 0x02			Headphone Playback Switch (Headphone Out)
Node 18 : Pin Default 0x03a11830						 Mic Boost Volume (External Mic)
Node 19 : Pin Default 0x90a70940						 Internal Mic Boost Volume (LineIN)
------
For example:-
at Node 14: 10 01 71 09 [ !KOREKCJA 9 -> 0]
at Node 15: 20 01 12 30
at Node 18: 03 81 a1 30 [ KOREKCJA ]
at Node 19: 04 90 a7 90 [ KOREKCJA ]
at Node 14 EAPD : 02 (Note 2)
at Node 15 EAPD : 02 (Note 2)

Corrected Verb Data:
Code:
at Node 14: 10 01 71 09
at Node 15: 20 01 12 30
at Node 18: 30 01 a1 30
at Node 19: 40 10 a7 90
at Node 14 EAPD : 02
at Node 15 EAPD : 02
--------
[CODEC VERBS]
Codec Address + NodeID + Verb Commands + Verb data
( Speaker Playback Switch )
For the Pin Complex Node 14:
0 + 14 + 71c + 10  = 01471c10
0 + 14 + 71d + 01  = 01471d01
0 + 14 + 71e + 71  = 01471e71
0 + 14 + 71f + 09  = 01471f09

( Headphone playback switch )
For the Pin Complex Node 15:
0 + 15 + 71c + 20  = 01571c20
0 + 15 + 71d + 01  = 01571d01
0 + 15 + 71e + 12  = 01571e12
0 + 15 + 71f + 30  = 01571f30

( Mic boost volume )
For the Pin Complex Node 18:
0 + 18 + 71c + 30  = 01871c30
0 + 18 + 71d + 01  = 01871d01
0 + 18 + 71e + a1  = 01871ea1
0 + 18 + 71f + 30  = 01871f30
( Internal mic )
For the Pin Complex Node 19:
0 + 19 + 71c + 40  = 01971c40
0 + 19 + 71d + 10  = 01971d10
0 + 19 + 71e + a7  = 01971ea7
0 + 19 + 71f + 90  = 01971f90

01471c10 01471d01 01471e71 01471f09 01470c02
01971c40 01971d10 01971ea7 01971f90
01571c20 01571d01 01571e12 01571f30 01470c02
01871c30 01871d01 01871e81 01871f30

01471c10 01471d01 01471e71 01471f09 01470c02 01571c20 01571d01 01571e12 01571f30 01470c02 01871c30 01871d01 01871e81 01871f30 01971c40 01971d10 01971ea7 01971f90
-----------------------------------

For output Devices, the PathMap follows this pattern
Pin Complex->Audio Mixer->Audio Output
!! [TO TRY] 0x14->0x0c->0x03, Decimal - 20->12->3
!! [TO TRY] 0x15->0x0d->0x02, Decimal - 21->13->2

Pin Complex->Audio Mixer->Audio Output (Hex values inside braces)
Speaker	: 20-> 12-> 2 (0x14->0x0c->0x02)
HeadPhone	: 21-> 13-> 3 (0x15->0x0d->0x03)
Pin Complex->Audio Selector/Mixer->Audio Input(Hex values inside braces)
Internal Mic	: 25-> 35-> 8 (0x19->0x23->0x08)
External Mic	: 24-> 34-> 9 (0x18->0x22->0x09)
--------
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
	Conn = 1/8, Color = Black
	DefAssociation = 0xf, Sequence = 0x0
	Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
 
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Speaker Playback Switch", index=0, device=0
	ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Speaker Phantom Jack", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00010014: OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x90170110: [Fixed] Speaker at Int N/A
	Conn = Analog, Color = Unknown
	DefAssociation = 0x1, Sequence = 0x0
	Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
	 0x0c 0x0d*
	
	
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
	ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Headphone Jack", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x03211020: [Jack] HP Out at Ext Left
	Conn = 1/8, Color = Black
	DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
	 0x0c* 0x0d
	
Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80]
  Pincap 0x00000010: OUT
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
	Conn = 1/8, Color = Black
	DefAssociation = 0xf, Sequence = 0x0
	Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
	 0x0f
	
	
Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="Mic Boost Volume", index=0, device=0
	ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Mic Jack", index=0, device=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00003734: IN OUT Detect
	Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x03a11830: [Jack] Mic at Ext Left
	Conn = 1/8, Color = Black
	DefAssociation = 0x3, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
	 0x0c* 0x0d
	
	
Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Control: name="Internal Mic Boost Volume", index=0, device=0
	ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Internal Mic Phantom Jack", index=0, device=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x01 0x01]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00003734: IN OUT Detect
	Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x90a70940: [Fixed] Mic at Int N/A
	Conn = Analog, Color = Unknown
	DefAssociation = 0x4, Sequence = 0x0
	Misc = NO_PRESENCE
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
	 0x0c* 0x0d
	
	
Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373c: IN OUT HP Detect
	Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
	Conn = 1/8, Color = Black
	DefAssociation = 0xf, Sequence = 0x0
	Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
	 0x0c* 0x0d
	
	
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00003734: IN OUT Detect
	Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
	Conn = 1/8, Color = Black
	DefAssociation = 0xf, Sequence = 0x0
	Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
	 0x0c* 0x0d
	
	
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
  Pincap 0x00000020: IN
  Pin Default 0x4004a205: [N/A] Line Out at Ext N/A
	Conn = RCA, Color = UNKNOWN
	DefAssociation = 0x0, Sequence = 0x5
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
  Pincap 0x00000010: OUT
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
	Conn = 1/8, Color = Black
	DefAssociation = 0xf, Sequence = 0x0
	Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
	 0x06

this is my code..
thanks for any help with that.

kamillo.

I heve strong troubles with running up my HD4000.
This notebook has the same spec as Acer aspire S5 ultrabook (the same processor, resolution, gpu etc.)

http://www.umpcporta... NP530/NP530U3C

13.3" LED (1366 x 768) Intel HD 4000, 8GB DDR3, Wifi Atheros AR9285, Li-Polymer, 3rd Gen (Ivy Bridge) Intel i5-3317U Processor (3M Cache, u 2.60 GHz), 128GB SSD

Something is wrong in Samsung because no one can run Intel HD4000 on that.

Below is my DSDT - in that configuration - only HDMI works - internal LVDS not working.

I don't know where is the problem, trying also automatic EDID in new Chameleon posted on insanelymac but also not working.

Tried other device-properties but only on ID=3 i can see anyth in HDMI, never on LVDS.
On HDMI acceleration works good.


DSDT.aml
https://www.dropbox....qqod8v/DSDT.aml

org.chameleon.Boot.plist
https://www.dropbox....leon.Boot.plist

smbios.plist
https://www.dropbox....4g/smbios.plist

SSDT.aml
https://www.dropbox....0ino4k/SSDT.aml

ioreg
https://www.dropbox..../ioreg_ds.ioreg

Hello, i am trying to install ML on my notebook.
My hardware specs:
South bridge: Intel Ibex Peak-M HM55
GPU: ATI Mobility Radeon HD 5650
IDE Controller : Intel® 5 Series/3400 Series Chipset Family 4 Port SATA AHCI Controller - 3B29
LAN: Marvell Yukon 88E8059 PCI-E Gigabit Ethernet Controller
WLAN: Atheros AR9285 Wireless Network Adapter
Sound: Realtek HD AUDIO ALC269
Procesor: Core i5 460M 2,53



I used myhack to prepare USB installation media, ML i bought from AppStore.
So...

Booting system from USB...
Typing flags:

Quote

And i have errors:

USBF: 1.375 AppleUSBEHCI[0xffffff80110cd00]::UIMInitialize - unable to get device memory
USBF: 1.375 AppleUSBEHCI[0xffffff80110cd00]::UIMInitialize - Error ocurred (0xe00002be)
USBF: 1.375 AppleUSBEHCI[0xffffff80110cd00]::UIMInitialize - unable to get device memory
USBF: 1.387 AppleUSBEHCI[0xffffff80110cd00]::UIMInitialize - Error ocurred (0xe00002be)

So USB not working, and system can't read data from USB Stick and i have:

Still waiting for root device

I also tried a flag:

USBLegacyOff=Yes

but it is not working

I tried to copy USB kexts from 10.7.4 and 10.7.3 but still not working, so my OSX install can't boot.

Could you help me?

Sorry for my bad english...