Jump to content

Chivs

Chivs

Member Since 28 Mar 2008
Offline Last Active Oct 22 2017 06:34 PM
-----

#2400324 [Guide] Mac OSX 10.12 and 10.13 with X99 Broadwell-E family and Haswell-E family

Posted by Chivs on 07 April 2017 - 04:49 PM

I see, no problem :) I don't think anyone has managed to get Thunderbolt to show up correctly in System Prefs. I played around with injecting all the device properties from a Macbookpro13,2 and it didn't have any effect. The best I can get is to have Thunderbolt show up under PCI. I'm messing around with a Z270X motherboard which has the same TB chipset as the latest MacBook Pro's (the X99's use an older chipset from 2015) so we'll see if that is any different. Right now I'm just stoked that my USB 3.1 ports (Type-A and Type-C) both work at 10Gb speed and sleep/wake correctly via the ssdt I posted. I did tweak it a little bit more with correct device properties, so it's attached here. Attached Files  SSDT-BR1B.aml.zip 2.13KB 4 downloads

#2398254 [Guide] Mac OSX 10.12 and 10.13 with X99 Broadwell-E family and Haswell-E family

Posted by Chivs on 03 April 2017 - 09:39 PM

no luck with power management /sleep usb issues. But hot swap usb is working fine here.If you meant thunderbolt hotswap, nobody has found a solution since thunderbolt1 era....  you neither will see thunderbolt devices in system profile section, apple thunderbolt implementation is quite different. Ok, here's a ssdt for BR1B that preserves the USB 3.1 port after sleep/wake. Thanks to mfc88 for getting me interested in this again and PikerAlpha for his invaluable information. I think I now have everything working on my MacPro6,1 X99P-SLI including sleep/wake, WOL with internal ethernet, WOL with ARPT, wake from Bluetooth etc. Attached Files  SSDT-BR1B.aml.zip 1.84KB 13 downloads

#2282599 [Guide] Mac OSX 10.12 and 10.13 with X99 Broadwell-E family and Haswell-E family

Posted by Chivs on 22 September 2016 - 04:33 PM

nmano,nice job in putting this all together. Been building Hack's for a while, but the X99 is definitely a challenge. I'll attach my own config later when I get a chance. Just a few notes from my setup of Sierra, which is on a X99P-SLI board.I need to use npci=0x3000 for the PCI devices to be recognized correctly.My graphics card is on BR3A, under H000, not GFX0. It's also onboard-1, not onboard-2You originally had a DSDT patch for sSATA, which isn't in your latest zip file. Any reason? BTW, although my MB has sSATA and I applied the patch, it doesn't show up under the PCI section of the System Report. Maybe because I don't have any devices attached?I have a 5820K, and use the FakeCPUiD Clover setting in order to have XCPM working correctlyI can't use the X99Injector kext because it moves all my USB 2 devices under USB3Chivs
© 2017 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy