Jump to content

spakk

spakk

Member Since 05 Dec 2007
Offline Last Active Private
*****

Topics I've Started

AMD Radeon HD 8240 R3 series - on El Capitan 10.11

10 March 2016 - 11:32 PM

good news for AMD APU users with AMD Radeon HD 8240 series R3, After several attempts, I've been able to activate today my graphics card.
More details, I'll write in next days, in advance a few pictures.

[AMD] OS X El Capitan (10.11) FX Kernel Task Force

23 January 2016 - 02:32 PM

This is an experiment, please install only on a second partition, test and report

USB-Fix for El Capitan

15 January 2016 - 06:14 PM

Hi folks,
I see it as appropriate, when we talk here about the USB problems that arise when installing El Capitan on intel/AMD Hackintosh, or my approach to use Yosemite kext drivers to fix the USB problems.
 
the first attempt V1, was for me the proof that it is the right way, the packet V2 has ultimately convinced me that it works. I do not need to patch any DSDT and all USB drives/ Ports operate as they have previously worked with Yosemite.
 

Hilfe - DSDT - USB Ports on El Capitan

06 January 2016 - 01:52 PM

Hi folks, I need urgent help from someone who has good experience with the modification of the dsdt.
My problem is that I have serious problems with my DSDT to activate my USB ports, see my current IOREG file and my DSDT.aml.
All previous attempts based various suggestions of various users, unfortunately, to enable the ports brought no good results. so far I could to activate my USB flash drive (at another DSDT), which was my previous progress, unfortunately.
if someone could make the effort to look my files and could give me a piece of advice, what changes should I make in my dsdt so that the usb slots could be activated. 
I would be very grateful.
 
thx
 
The appendix contains all important data.
 
Edit:
This ioreg file shows, that I boot with the GenericUSBXHCI.kext (ver. 1.2.8d7) .
All tests with those below listed patched USB drivers were unsuccessful.:
DummyUSBEHCIPCI.kext
DummyUSBXHCIPCI.kext
FakePCIID_XHCIMux.kext
FakePCIID.kext
USB_Series8_Injector.kext
USB_Series9_Injector.kext
USBInjectAll.kext
 
Edit:
Just for info: This patch brought in my DSDT no success:
 

"i use this dsdt patch for usb2 , find your device change the address and id and add it to your dsdt"

Device (UHC3)
            {
                Name (_ADR, 0x00120002)
                Method (_PRW, 0, NotSerialized)
                {
                    Return (GPRW (0x0B, 0x04))
                }

                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x09)
                        {
                            "device-id", 
                            Buffer (0x04)
                            {
                                0x96, 0x43, 0x00, 0x00
                            }, 

                            "built-in", 
                            Buffer (One)
                            {
                                0x00
                            }, 

                            "device_type", 
                            Buffer (0x05)
                            {
                                "EHCI"
                            }, 

                            "AAPL,clock-id", 
                            Buffer (One)
                            {
                                0x00
                            }, 

                            Buffer (One)
                            {
                                0x00
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }

"...and this for usb3 change dev add and id accordingly"

 Device (PCE9)
            {
                Name (_ADR, 0x00090000)
                Method (_PRW, 0, NotSerialized)
                {
                    Return (GPRW (0x18, 0x04))
                }

                Method (_PRT, 0, NotSerialized)
                {
                    If (PICM)
                    {
                        Return (AR09)
                    }

                    Return (PR09)
                }

                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x13)
                        {
                            "device-id", 
                            Buffer (0x04)
                            {
                                0x52, 0x70, 0x00, 0x00
                            }, 

                            "built-in", 
                            Buffer (One)
                            {
                                0x00
                            }, 

                            "device_type", 
                            Buffer (0x05)
                            {
                                "XHCI"
                            }, 

                            "AAPL,clock-id", 
                            Buffer (One)
                            {
                                0x00
                            }, 

                            "AAPL,current-available", 
                            0x0834, 
                            "AAPL,current-extra", 
                            0x0A8C, 
                            "AAPL,current-in-sleep", 
                            0x0A8C, 
                            "AAPL,max-port-current-in-sleep", 
                            0x0834, 
                            "AAPL,device-internal", 
                            Zero, 
                            Buffer (One)
                            {
                                0x00
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }

 

Edit:

if someone could tell me, to which Part in the DSDT, I can change in EHC1 = to => EH01 and EHC2 = to => EH02, it would be very helpful. Probably I made the recent changes in the wrong place.???

[AMD] OS X El Capitan (10.11) Kernel Testing & Release (for help use the Help Topic)

08 December 2015 - 07:57 PM

Apple has taken a very long time and just the xnu source was finally released for El Capitan.

So the source for OS X El Capitan released 7:00 +/- PM GMT

2mhu0iu.png

https://opensource.a...ease/os-x-1011/
© 2016 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy