Jump to content

spakk

spakk

Member Since 05 Dec 2007
Offline Last Active Private
*****

#2240209 HELP! After installtion of Yosemite 10.10.5

Posted by spakk on 25 May 2016 - 12:33 PM

to 1)Use the current Enoch bootloader, see here: http://www.insanelym.../file/71-enoch/install the bootloader on your OS X HDD to 2)in the folder /Extra/ is the org.chameleon.boot.plist, open this file with textEdit or plist Editor, change the line in the field: for Example: <key>Kernel Flags</key><string>-v kext-dev-mode=1 npci=0x2000 GraphicsEnabler=No usekernelcache=No</string> and paste this line in to org.chameleon.boot.plist: <key>EthernetBuiltIn</key><string>Yes</string> Moreover, reading, how to configure the org.chamleon.boot.plist. Furthermore, install these Ethernet kext driver of Mieze: http://www.insanelym...rtl8111-binary/ then Fix the permission and renew the Cache with kext wizard and start the system again and boot from your OS X HDD Edit:both bootloader work very well.If everything starts properly and you have enough experience with OS X etc..., then yo...

#2240200 HELP TOPIC - [AMD] OS X El Capitan (10.11)

Posted by spakk on 25 May 2016 - 12:00 PM

Hello guys , I would serve your help , yesterday I made a El Capitan installation to use it on amd , I replaced the kext with those in the packing v3 posted in another topic . I was able to start on a desktop with apu amd a8 7600 , operate the mouse or the keyboard , but acknowledgment of the graphical glitches . which kernel should I install ? Then I tried to get the " same installation " on another platform with Athlon 64 X2 , but it gave me an error with regard to the kernel and does not start . Tonight I should be able to try the computer that mounts the Phenom II x4 955Be . I seemed to understand that for each processor family , you have to use different versions of the kernel , I understood correctly ?Our effort is to build and start with an AMD Kernel, the most AMD CPUs/ APUs, a good example is 10.10.5_SSEPlus_V2 / V3 for Yosemite, this are applied to both on older CPUs as well as for newer AMD CPUs / APUs. Unfortunately we are still a few steps away to build a similar kernel...

#2240161 HELP TOPIC - [AMD] OS X El Capitan (10.11)

Posted by spakk on 25 May 2016 - 06:31 AM

@kwoje, @Joshie100 check your sata chip if it is listed here: http://www.insanelym...06#entry2221806otherwise, use the driver from rehabman

#2240124 [AMD] OS X El Capitan (10.11) FX Kernel Task Force

Posted by spakk on 24 May 2016 - 08:26 PM

Shane, probably it is the missing FMA4 instruction, we use FMA, which differs to AMD "FMA4". AMD "Bulldozer" use the FMA3- and AMD "Piledriver" use FMA4-Instruction. For exclude only FMA, AVX1 and AVX2 instructions will not be the solution to the problem, in my opinion. please read the PDF, from page 2.  FMA3/ FMA4FMA3 and FMA4 differ only in their usage of memory registers. In the multiply-accumulate operationd = a + (b * c)FMA3 requires that the target d be either a, b, or c. FMA4 allows the target to be a fourth register.UsageSupport for FMA4 is indicated by the value in bit 16 in ECX when calling CPUID function 0x8000_0001.Code Example – Dot ProductThe code below calculates the dot product of odd = [1, 3, 5] and even = [2, 4, 6] as shown in the exampleabove. It calls the _mm_macc_ss intrinsic which takes three arguments [src1, src2, src3] and returns src3 +(src1 * src2). It is a scalar operation, processing only the lowest order 32-bit value in the 128-bit regi...

#2240099 [AMD] OS X El Capitan (10.11) FX Kernel Task Force

Posted by spakk on 24 May 2016 - 05:41 PM

check that Attached Files  AMD10112_SSEPlus_4_test.zip 9.54MB 3 downloads
  • jsl likes this

#2239843 [AMD] OS X El Capitan (10.11) FX Kernel Task Force

Posted by spakk on 23 May 2016 - 12:14 PM

I think, that is the solution, please test and report. :) , I look just only to the icons, not on programs app that could possibly crash Attached Files  AMD10112_SSEPlus_3.zip 9.54MB 10 downloads
  • jsl likes this

#2239748 [AMD] OS X El Capitan (10.11) FX Kernel Task Force

Posted by spakk on 22 May 2016 - 06:52 PM

Here are 4 kernels which I tested on my APU system.kernel "AMD10.11.2_SSEPlus_V3" causing a opcode error endless-loop ... but that does not mean anything, it may be possible that it can run with FX CPUs...?, it should be tested.kernel "AMD10112_SSEPlus" Firefox and all programs working without problems, without app's crashes.kernel "AMD10112_SSEPlus_1" with tiny change to "AMD10112_SSEPlus" Firefox and all programs working without problems, without app's crashes.kernel "AMD10112_SSEPlus_2" with tiny change to "AMD10112_SSEPlus_1" Firefox and all programs working without problems, without app's crashes. Please test and report with respect to glitchy icons, I can not reproduce this icon error on my APU system.  Attached Files  AMD10112_SSEPlus_1.zip 9.51MB 1 downloads  AMD10112_SSEPlus.zip 9.51MB 1 downloads  AMD10.11.2_SSEPlus_V3.zip 9.51MB 2 downloads  AMD10112_SSEPlus_2.zip 9.51MB 2 downloads...
  • jsl likes this

#2239491 HELP TOPIC - [AMD] OS X El Capitan (10.11)

Posted by spakk on 21 May 2016 - 11:08 AM

here is my extra folder, what i'am missing?@hoxz, check the appendix "Extra" folder, optionally create a raw DSDT and upload it here    @Zenshredder, look in your message box ! Attached Files  Extra.zip 536.09KB 11 downloads

#2239303 HELP TOPIC - [AMD] OS X El Capitan (10.11)

Posted by spakk on 20 May 2016 - 08:33 AM

"..... VeryLowDisk ...." these describes the cause of your problem probably a drive, either your USB flash disk (with OS x installer) or one of your other HDD's is full or has bad sectors. Check your drives, possibly use another drive for example USB flash drive or HDD The procedure to locate and resolve the problems: ....If the disk has less than 4 GB of free space (only a rough estimate), then remove unnecessary data from your hdd and repair the Disk with Disk utility or with DiskWarrior. Under Windows operating system you can use MacDrive to repair the disk. If the HDD sectors are defective, then use another hdd and reinstall everything. If the USB flash disk should cause of the problem, then use another USB flash disk. Then it will works..

#2238613 [AMD] OS X El Capitan (10.11) FX Kernel Task Force

Posted by spakk on 17 May 2016 - 10:42 AM

Hi guys, I have allowed myself yesterday to built of two kernels for FX CPUs, based on my AMD_10.11.2_FX_fix with adjustments of Bronya's Kernel 10.9.4, the kernel starts very good with my APU system, no apps problems. please check the kernel to what extent there are changes the icons problems on FX CPU or not? sysctl "AMD_10.11.2_FX_fix": Spoiler Last login: Wed May 4 17:58:37 on ttys002 imac:~ spakk$ sysctl -a user.cs_path: /usr/bin:/bin:/usr/sbin:/sbin user.bc_base_max: 99 user.bc_dim_max: 2048 user.bc_scale_max: 99 user.bc_string_max: 1000 user.coll_weights_max: 2 user.expr_nest_max: 32 user.line_max: 2048 user.re_dup_max: 255 user.posix2_version: 200112 user.posix2_c_bind: 0 user.posix2_c_dev: 0 user.posix2_char_term: 0 user.posix2_fort_dev: 0 user.posix2_fort_run: 0 user.posix2_localedef: 0 user.posix2_sw_dev: 0 user.posix2_upe: 0 user.stream_max: 20 user.tzname_max: 255 kern.ostype: Darwin kern.osrelease: 15.2.0 kern.osrevision: 199506 kern.version: Darwin Kernel Versio...

#2237412 HELP TOPIC - [AMD] OS X El Capitan (10.11)

Posted by spakk on 11 May 2016 - 08:26 PM

The user Mr_G has almost the same hardware, please contact him.

#2237335 HELP TOPIC - [AMD] OS X El Capitan (10.11)

Posted by spakk on 11 May 2016 - 01:36 PM

So i've just got around to installing OS X El Capitan on a VM. I have an AMD FX 4100 CPU on my VM PC, and was running OS X 10.10.5 Successfully with no issues at all. Upon starting the install for OS X El Capitan 10.11.0 I got greeted with this. https://i.gyazo.com/...4e3fa8b54a6.png Anyone know how I could fix it? I'm guessing I have to set my Mac OS X VM back up and restore everything. But I really wanna run El Capitan. Lol Thanks guysuse a different amd kernel for FX CPUs! renew cache and re-start

#2237300 The Wi-Fi signal drops out when USB 3.0 hub connected?

Posted by spakk on 11 May 2016 - 09:47 AM

Install this driver: https://bitbucket.or...-usb3/downloads,then repair the permission and renew kernel cache

#2236960 How to Update Niresh Yosemite 10.10.1 to 10.10.5 on amd fx

Posted by spakk on 09 May 2016 - 04:25 PM

how install update niresh yosemite 10.10.1 to 10.10.5 . i tried to install update on app store, then download amd 10.10.5 kernel, kext & framwork from this link : http://www.insanelym...-10105-sseplus/and copy past on system/library after boot system showing mac os version not yet set,  debugger not configured. hanging. plz help....because you use a distro, I will not help you even although I know the cause of your problem, and know a solution for the problem.

#2236796 10.11.4 no usb ports

Posted by spakk on 08 May 2016 - 06:13 PM

for opening of the hidden EFI partition, use  EFI-Mounter.app, see above under downloadthen put this in to EFI/Clover/ ....kexts/10.11 edit:if it does not work, then upload your patched DSDT and a raw DSDT and the ioreg-file, eventually someone is in a position to help you further.

© 2016 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy