Jump to content



Member Since 26 Feb 2015
Offline Last Active Feb 11 2016 09:29 PM

#2213666 Where to get Tiger ten years later?

Posted by Codinger on 06 February 2016 - 10:36 AM

This is actually sound advice. Heres the deal... whatever you boot the osx on the same box (like say, if you have a working install of X.6.8 through X.11.3) with in clover (im not sure about chameleon) now, find the minimum config needed via only clover to get the {censored} booted.. NO ADDED KEXTS and do it methodically making sure you ahve 100% unmodified install sources/media next, and this is the context you need here: get vanilla tiger image.... no special kernels/patches. etc. no added bs kexts. no extra random flags or tweaks to it... this is critical and hard to obtain as nobody really knew what it was that made it work/not work.. and most {censored} you download is this.. back then a {censored}load of ad-hoc kernel patches/kexts etc were added to these "distros" like the deadmoo or the iatkos or the JaS etc etc. and all that adhoc stuff was tested to death and always did and still sucks miserably to try and troubleshoot... now boot it via the minimal clover config....

#2209899 [HOW TO] Modification of AMD FB + Clover injection

Posted by Codinger on 24 January 2016 - 09:36 AM

@codinger YOU ARE THE MAN !!! it totally works I get 3 displays thank you thank you (=Thats cool :) You are welcome. This should work 02000000400000000908010110000005

#2208986 config.plist issues

Posted by Codinger on 21 January 2016 - 09:31 PM


#2208715 [GIVEAWAY]

Posted by Codinger on 21 January 2016 - 07:43 AM

Hello folks, recived today three invites for the OnePlusX. If you want one drop me a pm ;) P.S. ... Available : 2/3

#2208436 OS X 10.11.3 is out!

Posted by Codinger on 20 January 2016 - 03:15 PM

My patched AMD7000Controller has not been overwritten by the 10.10.3 Update

#2208348 OS X 10.11.3 is out!

Posted by Codinger on 20 January 2016 - 07:18 AM

I never had that problem on any osxAll r9's are having black screen after sleep

#2208135 [GUIDE] USB Fix El Capitan 10.11

Posted by Codinger on 19 January 2016 - 01:25 PM

Unfortunately I am obviously not the right person to work on this .. The more I try to merge the EH01/2 the more error messages I get .. So I better leave that to someone with more knowledge about what he's doing ...Calm down ill do it for you

#2208102 [GUIDE] USB Fix El Capitan 10.11

Posted by Codinger on 19 January 2016 - 09:20 AM

@ol@fson - a few things that stand out to me on this T410 DSDT. i see you started to customize this and change EHC1/EHC2 to EH01 and EH02 and a few other mods. ok but... 1) EH01 EH02 -- i don't see the typical DSM info that defines currents etc in these devices 2) and then remove _PRW method from these devices. 3) and then continue to remove the _PRW methods to match the T420. since i don't have a T410 but T420, i compared DSDT. very very similar. so perhaps the easiest way to patch up your DSDT would be to cut/paste from T420 EH01 and EH02 device into your DSDT. get the T420 DSDT.dsl ( has lots of comments ) from the zip here: Clover UEFI on T420 GuideHello ... I am the creator of the DSDT. I had no time yet to continue working on it. [emoji22] Thank you for your contribution.

#2208063 [GUIDE] Install OSX 10.1X on Lenovo T410 [Step by Step]

Posted by Codinger on 19 January 2016 - 05:42 AM

Hi ol@fson, I tried all your files. It's better, it can boot, no error(s), but display is very very bad, almost can't seeing something. I tried with normal, alternative, alternative 2. I think I will read more on thread about IntelHDGraphic. :(Use my files and my DSDT and only the gfx0 section of the other DSDT.

#2207783 A little help ALC 3221

Posted by Codinger on 18 January 2016 - 11:17 AM

Hi people! I've successfully installed El Capitan on my Dell Inspiron 15R 5221 with a little bit of mods for El Cap by following this guide: http://www.insanelym...all-guide-dell/ I've noticed that the patched Audio is for Yosemite and I don't wanna mess up my install. A little bit of help on how to patch ALC 3221 for El Capitan please? Thanks!Apple HDA works on El Cap too

#2207619 What to do when you think you have....

Posted by Codinger on 17 January 2016 - 09:32 PM

K : Keep calm and patch GMA 950 for El Capitan  :D

#2207437 White shadow on R9 280 at fast movement

Posted by Codinger on 17 January 2016 - 11:45 AM

I get no "," with this config of model in DSDT  ^_^  I found out why :D You have to edit the buffer (0x13 in decimal is for a string length of 18 (18 dec -> 0x12 + 1 hex) to 0x12 hex because the Stings length is 17 dec -> 0x11 + 1 hex. 

#2207199 Need DSDT edit to get my 7xxx working...thanks

Posted by Codinger on 16 January 2016 - 11:58 AM

Thank you and good week end [emoji14] [emoji14] [emoji14]Np

#2207058 OS X 10.12 codename Fuji - What we know about it....

Posted by Codinger on 15 January 2016 - 10:15 PM

 AMD CPU Support... We can only hope for it one day  :hysterical:  Yessss

#2206684 Chameleon to Clover?

Posted by Codinger on 14 January 2016 - 07:05 PM

I installed OS X on my system and it works great. When I installed it I selected no boot loader on the OS X installer since I had a USB with clover. However now I check, it has Chameleon boot loader on. So I have been using the USB Clover to boot on OS X I am trying to install Clover to the HDD, but when i try install it, it still shows chameleon. How do I remove chameleon off the HDD, so that I can use Clover?The default installer does not include some Funktion of "Installing Bootloader" you obviously are using a distro :) Try a retail clean install :D

© 2017 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy