Jump to content

macgirl

macgirl

Member Since 05 Jul 2005
Offline Last Active Apr 26 2016 03:38 PM
*****

#2234636 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 26 April 2016 - 03:36 PM

Thanks macgirlthis kext support mac OS X 10.11?It works since 10.6 or older OS Xs, I really don’t remember, this kext is what I am using since VoodooHDA or other alternatives never give sound on Speakers. Install it with Kext Utility.

#2226188 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 23 March 2016 - 04:31 PM

I didn’t have problems with 10.11.4 update on my XPS-M1330, there was with security update 2016-002 of Mavericks I did have problems on my iMac (27” 2012 mid model). On the XPS I got the no sound problem because I use patched AppleHDA.kext, but installing it with Kext Utility solves that. Still, I have very low benchmark on User Interface Test compared to Mavericks 

#2195526 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 09 December 2015 - 11:04 PM

Hi @macgirl, Did you remember to set CsrActiveConfig to 0x3 in your config.plist/RtVariables before running the update?  This will allow you to replace the native AppleHDA.kext in /S/L/E with your patched one and then rebuild caches/pre-linked kernel by running Kext Utility ---> reboot.  Once everything is back up and running, you can set CsrActiveConfig back to 0x0 for maximum security. I use VoodooHDA on my XPS M1530 so everything worked for me after the 10.11.2 update :).  Yes, CsrActiveConfig is set to 0x3, remember that VoodooHDA never worked with my XPS M1330, so something new is making a conflict with that old AppleHDA.kext Edit: I didn’t use Kext Utility, before this update I copied the AppleHDA.kext manually and worked, just a moment ago I used KU on Mavericks but still not working. Edit2: I did use KU on El Capitan with success, sound is back. Edit3: I just rebuild the kext cache from El Capitan to the Mavericks pa...

#2180807 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 22 October 2015 - 02:50 PM

I’m very disappointed with EC Disk Utility, so I am using iPartition but Disk Utility Patched is great news  :) Also updated to 10.11.1 without any issues, I hoped the update fix the laggy UI but still very slow  :( Here is a screenshot of XBench results, the big difference is in all graphics benchmarks:  Screen Shot 2015-10-21 at 2.59.27 PM.png 481.22KB 2 downloads

#2177400 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 13 October 2015 - 09:21 PM

@macgirl, Try replacing your FakeSMC with the attached FakeSMC.kext.  I have edited the info.plist so the UsbConnector number for USB ports 1-3 have been set to 3 (normal usb socket) instead of 255 (internal connector).  I am also assuming you have EHCI and EHC2 in your dsdt like @immo....   Not really, I edited my DSDT file to change USBx to UHCx+1 and EHCI to EHC1 Thanks. EDIT: Also I using the same FakeSMC with Mavericks and no problem with icons EDIT 2: I edited the FakeSMC on El Capitan and set ports 1-3 to 3, now I don’t have internal drive icons on the right or left port. THANKS  :)

#2173905 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 06 October 2015 - 01:41 AM

Well… I found "somewhere else" a MOD to FileNVRAM that works with Yosemite and it is working for me with Chameleon Enoch on El Capitan this mod has also FileNVRAM.kext   Screen Shot 2015-10-05 at 8.33.07 PM.jpg 102.98KB 8 downloads

#2173320 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 04 October 2015 - 07:40 PM

Glad you've had some success with M1330. I haven't yet :( What DSDT did you use? Did you require any patches beyond what's on the first post? I get "Still waiting on root device" while trying to boot El Capitan from the flash drive. I suspect I need patching to fix USB.Also, what graphics does your M1330 have? I COULD NOT get my NVidia 8400M GS graphics recognized with Clover at all. I tried various graphics flags, specifying NVCAP, putting the NVCAP in the DSDT, etc. Also, did you use the vanilla USB method, installing from the application, or the traditional Hackintosh USB key? So far I've only got anywhere with the Hackintosh method. I can start booting using the other methods with Clover, but like I said above, no video. ImmoI have two DSDT files, one with the HDEF mod and the other without. These are my Clover files: I used the Vanilla USB Method posted by fusion71au some posts above. BTW, I had no sleep problems, my mistake, I never put hiber...

#2172277 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 02 October 2015 - 06:15 PM

Ok, so long trying installations, yesterday I tried El Capitan copying my existing Mavericks to a GUID Disk on my Mac Pro, upgraded to 10.11 and copy back to the XPS-M1330 MBR disk. After some tries of Chameleon and Clover I got full boot but in either case I got a very slow system. Now I am trying a clean installation. I never installed Yosemite on the XPS-M1330, only on the Mac Pro and I didn’t like it, so the Mac Pro get Mavericks again. At the office I got Yosemite on an iMac, I hate some glitchs of the UI, but I installed El Capitan on a Parallels VM. I'll keep you posted if I pluck all my hair  :sick: or El Capitan works better than Yosemite.

#2070616 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 17 October 2014 - 03:39 PM

So guys, Long time, Yosemite party over weekend ?  :wink_anim: I installed it on my Mac Pro Yesterday, today I will install it on my office’s iMac, and maybe on my XPS M1330 on the weekend. But I really hate all the FLAT DESIGN and the new colors  :mad:  :angry:  :thumbsdown_anim:  :censored:

#2068869 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 13 October 2014 - 02:16 AM

 No luck :(  These are my AppleHDA.kext and DSDT.aml With these I got sound from Internal Speakers and two of the headphone plugs, Internal Mic does not work but Line In does. Attached Files  AppleHDA+DSDT.zip 1.38MB 17 downloads

#1980593 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 31 December 2013 - 07:31 PM

I've been reading you all :D   Happy New Year everybody!  :w00t:

#1976976 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 18 December 2013 - 11:23 PM

Hi Guys, I've just stumbled across a very handy utility for creating a recovery partition:  Create Recovery Partition Installer 1.1By creating a recovery partition, this will enable all features in iCloud and iMessages on your Hackintosh such as Find My Mac & Back to My Mac (described in this excellent article by Rampagedev).  I have iCloud, iMessages & Back To My Mac without Recovery partition. Good to know there is a solution to create a Recovery Partition, but I doubt Find My Mac has a real use.

#1972652 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 30 November 2013 - 07:20 PM

The "Detect Displays" feature went away after Lion so that's no longer available from 10.8.0 onwards.  However, the same is accomplished in Mountain Lion by simply putting your notebook to sleep, attaching a VGA display and then waking.  Upon wake, your notebook will just find the external display.  Basically, the same effect as the old "Detect Displays".  Of course, initially booting up with the external VGA display attached works as well. Detect Displays didn't go away, it just hidden, when you are in the Displays Preference Panel press Option Key (or alt key on some keyboards) and the Detect Displays buttons appears, you don't need to put your hackintosh on sleep. Attached Files  Untitled.jpg 165.98KB 1 downloads

#1971175 [GUIDE] Making a DSDT.aml for Dell XPS M1330, XPS M1530, and XPS M1730

Posted by macgirl on 24 November 2013 - 05:59 PM

DSDT patched, AppleHDA kext replaced = Sound on speakers with Mavericks :D Thanks guys.

#1968496 [Guide] The all-in-one guide to Vanilla OS X (including Chameleon + DSDT) for...

Posted by macgirl on 16 November 2013 - 03:54 AM

Thanks :D Darkwake is already there. Trying right know. AppleACPIPlatform and RTC patch worked  :thumbsup_anim:

© 2016 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy