Jump to content



Member Since 24 Sep 2005
Offline Last Active Today, 03:44 PM

Posts I've Made

In Topic: HWSensors3

Yesterday, 05:22 PM

...hey devs, looking for an assist getting sensors read... chipset SCH5617...not currently supported by LPCSensors plugin....I've found some info, and an app in windows that does read from the chip (Hmonitor Version but I'm not knowledgeable enough to tear into the app and see how it works.....



Hmonitor Version Pro 02ACFA04


H/W diagnostics info:

Windows 8 Professional x64 Version 6.2.9200 

Manufacturer: LENOVO

Board model: ThinkCentre M57

Version: LENOVO


BIOS version: 2RKT64AUS, Release date: 11/24/2011

Chipset: 29B08086

Vendor ID: 303817AA

SouthBridge: 29148086

SMB port used: 1C20

CPU:Intel® Core™2 Quad CPU  Q9550 @ 2.83GHz



Internal Freq=2826.0 MHz

External Freq=403.71 MHz


SystemBus Freq=21.801 GT/s 

Thermo control configuration:

Full Throttle:100.0%

AMD Low Power mode:Disabled

Device:None Throttle:25.0% Enable at:70.0°C Disable at:65.0°C

Main Sensor: SCH5617

Poll intervals: Sensors=5 sec, HDDs=5 min, Warnings=5 sec

EventLog: Disabled, EventLog.txt

DataLog: Disabled, DataLog.txt

Loginterval=1 min, LogRotation=Never


Monitored data values:

Mainboard=xx.x°C (0,Auto,0.0°C)

CPU1=xx.x°C (1,Auto,0.0°C)

CPU1 Core=41.0°C (1,CoreTemp,0.0°C)

CPU0 Core=44.0°C (0,CoreTemp,0.0°C)

Chassis=1449 rpm

CPU1=xxxx rpm

CPU2=337 rpm

Power=xxxx rpm








HDD1 temp=27.0°C ST9500420AS 0003LVM1 SATA

HDD2 temp=40.0°C ST380815AS 3.CCA SATA

VGA device: NVIDIA GeForce GTX 745

VGA Device ID: 138210DE,106510DE.A2

VGA Acceleration Level: 0

VGA sensor: ForceWare

VGA GPU=50.0°C

VGA Env=xx.x°C

VGA Fan=xxxx rpm (xx%)

VGA Core=+x.xxV

VGA Bus=+x.xxV

I'll include what info I could find...please find attached 2 pdf files, one relates specifically to the SCH5617, the other is data sheet for SCH5627P but refers to SCH5617 differences (hoping it supplies some useful tidbits)

In Topic: Clover General discussion

18 February 2018 - 09:47 PM

hmm, is it possible to select load vbios under graphics in config.plist without injecting Nvidia? (for my card injection gives me 0mb vram)


edit: lol, and still have the rom file load (I'm assuming this shows the rom being used)...



39:933  0:008  Found generic VBIOS ROM file (10de_1382.rom)

39:951  0:017   header found at: 1536
39:951  0:000   using loaded ROM image
39:951  0:000  version
39:951  0:000  nVidia nVidia GeForce GTX 745  -92274688MB NV117 [10DE:1382] :: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0) => device #1
39:951  0:000  Nvidia: VideoPorts: undefined, default to: 2
39:951  0:000  default NVCAP: 04000000-00000200-1D000000-00000007-00000000
39:951  0:000  HDA Controller [8086:293E] :: PcieRoot(0x0)\Pci(0x1B,0x0) => codec not detected
39:966  0:015  stringlength = 5466
39:967  0:000  CurrentMode: Width=1920 Height=1080

In Topic: AppleDecrypt Sinetek AnV (V3.1.0) for SL, Lion, Mountain Lion, Mavericks and...

13 February 2018 - 06:00 PM

...just for fun...loaded it up on sierra...  :smoke:


Attached File  Still.png   472.29KB   4 downloads        Attached File  corecrypto.png   156.07KB   3 downloads




edit: system was a little less responsive, and ran a bit hotter ...switched back to dsmos.kext.  :surprised:

In Topic: Lenovo ThinkCentre M57 SFF shutdown

04 February 2018 - 01:02 AM

@chris... I could boot no dsdt...but, system was a bit choppy to start...still no shutdown either...I'll leave it for now... ? 

In Topic: Lenovo ThinkCentre M57 SFF shutdown

04 February 2018 - 12:25 AM



And with out DSDT its boot or not?

...haven't tried without dsdt since installing 10.12.6... I believe MaL adjusted my dsdt to accommodate my graphics card (among other things) but, I can try it...

© 2017 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy