Jump to content



Member Since 14 Apr 2007
Offline Last Active Aug 07 2015 10:02 AM

#2158549 New OS X compatible motherboard -> QUO

Posted by bs0d on 07 August 2015 - 10:02 AM

clearly fakesmc isnt loading, place in /L/E

#2063299 Ozmosis

Posted by bs0d on 23 September 2014 - 11:46 AM

you dont need to flash the bios every time you make a change Defaults.plist is read from /Efi/Oz TBH only things worth having in the bios are any EFI drivers, everything else is better to be located on ESP since it changes more often.

#2062987 Ozmosis

Posted by bs0d on 22 September 2014 - 09:36 AM

simple remove the timeout setting.

#2062478 Ozmosis

Posted by bs0d on 20 September 2014 - 12:46 PM

If you are seeing OzAcpi or OzDarwin folders check if you have replaced FileSystem (93022F8C-1F09-47EF-BBB2-5814FF609DF5) with EnhancedFat (961578FE-B6B7-44C3-AF35-6BC705CD2B1F) and also check if you have added PartitionDxe/EnhancedPartition (1FA1F39E-FEFF-4AAE-BD7B-38A070A3B609).

#2058039 Clover General discussion

Posted by bs0d on 05 September 2014 - 01:08 PM

Here's a compiled version of NvmExpressDxe.efi. (unpack the zip first) load it via the shell and do map -r rgds  NvmExpressDxe.zip 18.57KB 11 downloads 

#2054396 Ozmosis

Posted by bs0d on 22 August 2014 - 10:08 PM

before :P

#2051508 [UEFIPatch] UEFI patching utility

Posted by bs0d on 13 August 2014 - 10:27 PM

// My opinion to OZM as UEFI developer: storing bootloader in firmware is a bad idea.// I do know why it's done like this by QUO people, but for normal boards it's fully useless and makes no sence. Its not a bootloader, it just adds functionality to the firmware to boot os x naitively like a driver does. its designed to run either from the firmware or from media such as a hard drive using bcfg to add.

#2050736 DarwinDumper

Posted by bs0d on 11 August 2014 - 06:14 PM

you maybe able to read them directly from the cards this would also permit reading cards that haven't posted. since usually only 1 video bios can be active in the legacy region. most of the boot loaders have code for retrieving the rom directly from cards, this should be possible with a kext,

#2050243 Ozmosis

Posted by bs0d on 10 August 2014 - 07:32 AM

you can mix both methods also.

#2049396 Various Hardware Info tools for OS X

Posted by bs0d on 07 August 2014 - 03:50 PM

EDIT: I forgot to mention that this dumps the native tables from BIOS and not the tables injected by the boot loader. some 'bootloaders' also update the legacy regions for ACPI and DMI so the correct tables will be dumped.

#2037700 OS X Yosemite DP's builds!

Posted by bs0d on 07 July 2014 - 05:43 PM

Yeah SMBios changes are not enough if u use Clover.   you'll need one of these 

#2037297 Ozmosis

Posted by bs0d on 06 July 2014 - 12:14 PM

you can place a Defaults.plist file in /EFI/Quo and it will take precedence of any found in firmware

#2036689 OS X Yosemite DP's builds!

Posted by bs0d on 04 July 2014 - 07:43 AM

Too bad that UEFI is not really open source, because then you could patch everything Clover does now from within the UEFI BIOS and load boot.efi. Without the need to reproduce the whole freaking code base. This is also why my bets are on Coreboot.org. I want that to mature so that we can start doing what had to be done in the first place. Whats this then http://tianocore.sou...e.net/wiki/EDK2

#2034586 Ozmosis

Posted by bs0d on 26 June 2014 - 09:21 PM

Its chosing some external disk you have that contains a /EFI/QUO folder delete that and boot without that drive connected and /EFI/QUO will be created on an internal drive. and that should then appear in this log line instead of your external drive. Found Storage PciRoot(0x0)/Pci(0x1C,0x0)/Pci(0x0,0x0)/Pci(0x5,0x0)/Pci(0x0,0x0)/VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)/?/HD(1,GPT,C0379A4E-B0EF-46E6-9913-D6C4237F319E,0x800,0x100000) The thinking is ..... if you make a mistake with a file that gets loaded from the internal disk, you can plug in an external drive with an /EFI/QUO folder which will take precendce of the internal drive and hopefully let you boot. It should create and use /EFI/QUO folder on your first internal disk's EFI System Partition, thats its normal location.

#2034037 New OS X compatible motherboard -> QUO

Posted by bs0d on 25 June 2014 - 10:06 AM

use this tool win2usb to create your usb stick http://www.share-onl...dl/EYIBOL6NPHK9

© 2015 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy