cwchanwoo Posted April 8, 2008 Share Posted April 8, 2008 Radeon X550 (PCIE): Chipset Model: Radeon X550 (PCIE) Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x5b63 Revision ID: 0x0000 Displays: L9WA4: //my system can recognize my LCD Monitor CORRECTLY. Resolution: 1024 x 768 @ 60 Hz Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported I try it many times with this steps here, but it doesn't work -- QE and CI not supported. I have used Callisto 008 and ATIRadeon9700.kext from Leopard Graphic Update 10.5.2. T try to boot system with verbose (-v) mode, I saw Callisto called PLL and etc normally, no any error. I can adjust my screen resolutions, but QE and CI didn't work anymore. ------------------------------------------------------------------------ Are you have any suggestion for setting up this graphic card kext ? Link to comment Share on other sites More sharing options...
sm_arif Posted April 8, 2008 Share Posted April 8, 2008 I try it many times with this steps here, but it doesn't work -- QE and CI not supported. I have used Callisto 008 and ATIRadeon9700.kext from Leopard Graphic Update 10.5.2. T try to boot system with verbose (-v) mode, I saw Callisto called PLL and etc normally, no any error. I can adjust my screen resolutions, but QE and CI didn't work anymore. ------------------------------------------------------------------------ Are you have any suggestion for setting up this graphic card kext ? Leopard not supported X550 anymore The OpenGL Driver, is PowerPC formatted For framebuffer (resolution) try to use callisto. I use my X550, only on Tiger Link to comment Share on other sites More sharing options...
cwchanwoo Posted April 9, 2008 Author Share Posted April 9, 2008 Leopard not supported X550 anymoreThe OpenGL Driver, is PowerPC formatted For framebuffer (resolution) try to use callisto. I use my X550, only on Tiger which tiger (version) that work for my X550? Link to comment Share on other sites More sharing options...
sm_arif Posted April 9, 2008 Share Posted April 9, 2008 which tiger (version) that work for my X550? 10.4.6 till 10.4.11 all Tiger... Link to comment Share on other sites More sharing options...
cpj Posted April 9, 2008 Share Posted April 9, 2008 how do you adjust the resolution after installing callisto? i have ATI x600, and ran the two shell scripts...when rebooting i didnt put it in verbose mode, but it seemed that something was briefly shown that indicated i had installed something. however, nothing seems to have changed, and i dont know where the settings for changing resolution are. Should they be in display preferences, or somewhere else? Link to comment Share on other sites More sharing options...
cwchanwoo Posted April 9, 2008 Author Share Posted April 9, 2008 how do you adjust the resolution after installing callisto? i have ATI x600, and ran the two shell scripts...when rebooting i didnt put it in verbose mode, but it seemed that something was briefly shown that indicated i had installed something. however, nothing seems to have changed, and i dont know where the settings for changing resolution are. Should they be in display preferences, or somewhere else? Try this step by step I try it many times with this steps here , but it doesn't work -- QE and CI not supported. But QE/CI didn't work. Link to comment Share on other sites More sharing options...
Recommended Posts