Silent OSX Posted March 16, 2008 Share Posted March 16, 2008 I have big problems with my Gigabyte Radeon X1600Pro Silent pipe II card (0x71c2). Since I installed Leopard I can't get it working right. It worked flawlessly in Tiger. I can get resolutions working by using ATIInject but CI/QE is impossible.. I've tried following this guide: http://forum.insanelymac.com/index.php?sho...&start=0%22, Tried using the old Natit ppack from my 10.4.8 install and various other methods. It hangs at a blue screen when loginwindow is started. No cursor or anything. Either that or no GUI at all is shown, stays in terminal-like mode (when booting with -v) I really need your help! If I get this working I'll have a 100% Leo install. In Tiger, borisbadenov's method didn't work for me, I had to use the Natat kext..If that can be useful to know... Relevant setup information: OS: Leopard 10.5.2 currently eddie's Leo4All, tried Zephyroth' version as well. AMD Athlon 64 3500+ DFI Infinity RS482 - North bridge: ATI Radeon Xpress 200 RS482 - South bridge: ATI SB450 - Integrated graphics: ATI Radeon X300 GPU (not in use) Gigabyte X1600Pro Silent pipe Apple Cinema Display 20", DVI From System Profiler: ATI Radeon X1600: Chipset Model: ATY,RadeonX1600 Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x71c2 Revision ID: 0x0000 EFI Driver Version: 01.00.068 Displays: Cinema Display: Display Type: LCD Resolution: 1680 x 1050 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Status: No display connected Thanks in advance! Link to comment Share on other sites More sharing options...
osix Posted March 21, 2008 Share Posted March 21, 2008 If you will find solution please help me. I have the same video card and tried to do something to get a QE\CI enabled. On 10.4.9 is going perfectly but on Leopard not working Link to comment Share on other sites More sharing options...
han123 Posted March 22, 2008 Share Posted March 22, 2008 Same problem here, any advice would be nice Link to comment Share on other sites More sharing options...
dionysossss Posted March 22, 2008 Share Posted March 22, 2008 I suffer same problem I googled and found this http://osx.kbot.de/comments.php?DiscussionID=706&page=2 ”Awesome! It finally got it working! I can swear I tried the same steps before..but... I installed all the graphic kext's from 10.5.1 and got CI/QE with terrible tearing, then I installed the Graphics update and before I restarted I installed the my modified kexts. BAM! Full CI/QE, DVI and everything.” maybe this is the solution but I didn't try yet Link to comment Share on other sites More sharing options...
dionysossss Posted March 23, 2008 Share Posted March 23, 2008 for the solution http://forum.insanelymac.com/index.php?showtopic=95169 Link to comment Share on other sites More sharing options...
han123 Posted March 23, 2008 Share Posted March 23, 2008 Oh boy... It worked!!! Thank you so very much! I installed Leo4all and after getting to the desktop the first thing, i did was to install the patch from dionysossss. Ilife 08 works like a charm and Vmware fusion with Win XP the same. Great! Link to comment Share on other sites More sharing options...
Recommended Posts