MorphewS Posted March 11, 2008 Share Posted March 11, 2008 Ok, my card works with triaks with 10.5.2, but AFTER instaled last Updates, like, Graphics Update, QT,Itunes,Ilife helper... Core Image and QE doesnt work any more. I have Kalyway 10.5.1 @ Comboupdate 10.5.2 + EFI + Kernel 9.2. HD 2400 PRO will work complete in Leopard FULL updated? What VGA works perfectaly with OSX? Maybe i will buy another. Sorry for english. Link to comment Share on other sites More sharing options...
MorphewS Posted March 14, 2008 Author Share Posted March 14, 2008 HELP Link to comment Share on other sites More sharing options...
Falu Posted March 14, 2008 Share Posted March 14, 2008 It works flawlessly with ATI Radeon 2400 HD Pro. I have attached the file you need. Install it first before following this guide. DO NOT REBOOT UNTIL YOU FINISHED THE GUIDE. Once you install Triakis you must add your dev id into the ATI2000xRadeon.kext , to do so open /System/Library/Extensionsin there lookup for the fore-mentioned kext and do control+click and select Show Package Contents, there go to /Contents and copy the file info.plist to your desktop, keep the window open. Once copied open it up and look for the line that says <key>IOPCIMatch</key><string>0x94001002 0x94011002 0x94021002 0x94031002 0x95811002 0x95831002 0x95881002 0x94c31002 0x94c81002 0x94c91002</string> On the line where it says<string> add your device id (ex. 0x94c3 + vendor id ATI=1002 0x94c31002) once you edited it, go to file>save and save it like Info.plist if you get a confirmation dialog click on Use .Plist. Once that is done copy the .plist file back into the ATI2000xRadeon.kext Leopard will ask you to replace the file, click on replace and input your password to authenticate. After you copy the Info.plist file close the window, and go back to /System/Library and look for Extensions.mkext select that file and send it to the Trash. Now open a terminal and run the following command: sudo kextcache -k /System/Library/Extensions. Afterwards, open Disk Utility and Repair Disk Permissions. Then reboot, and voila everything will be working!!!! Triakis_2400_2600_2900_3800.zip Link to comment Share on other sites More sharing options...
MorphewS Posted March 14, 2008 Author Share Posted March 14, 2008 It works flawlessly with ATI Radeon 2400 HD Pro. I have attached the file you need. Install it first before following this guide. DO NOT REBOOT UNTIL YOU FINISHED THE GUIDE. Once you install Triakis you must add your dev id into the ATI2000xRadeon.kext , to do so open /System/Library/Extensionsin there lookup for the fore-mentioned kext and do control+click and select Show Package Contents, there go to /Contents and copy the file info.plist to your desktop, keep the window open. Once copied open it up and look for the line that says <key>IOPCIMatch</key><string>0x94001002 0x94011002 0x94021002 0x94031002 0x95811002 0x95831002 0x95881002 0x94c31002 0x94c81002 0x94c91002</string> On the line where it says<string> add your device id (ex. 0x94c3 + vendor id ATI=1002 0x94c31002) once you edited it, go to file>save and save it like Info.plist if you get a confirmation dialog click on Use .Plist. Once that is done copy the .plist file back into the ATI2000xRadeon.kext Leopard will ask you to replace the file, click on replace and input your password to authenticate. After you copy the Info.plist file close the window, and go back to /System/Library and look for Extensions.mkext select that file and send it to the Trash. Now open a terminal and run the following command: sudo kextcache -k /System/Library/Extensions. Afterwards, open Disk Utility and Repair Disk Permissions. Then reboot, and voila everything will be working!!!! THX!!!!! But, u have all update? Graphics? itunes, quicktime, ilife? With me its work, but after 10.5.2 + ALL updates for Apple update, it doesnt works anymore Link to comment Share on other sites More sharing options...
Falu Posted March 14, 2008 Share Posted March 14, 2008 I don't use 10.5.2 I don't know. I don't want to risk it now since it took me 3 days to get it working. Link to comment Share on other sites More sharing options...
MorphewS Posted March 14, 2008 Author Share Posted March 14, 2008 I don't use 10.5.2 I don't know. I don't want to risk it now since it took me 3 days to get it working. Well, if 10.5.2 without update, Core Image and Quartz extreme stay working. 10.5.2 is good, use much less memory. EDIT: I know how get 10.5.2 + ALL update + Core Image + Quartz Extreme in HD 2400 PRO with DVI! PIC Take a look. To get ALL WORK, with Kalyway 10.5.1 just: -Install, -Get work CI and QE. -With CI and QE working, do ALL updates from software update less 10.5.2. -Get Kalyway 10.5.1-10.5.2 and Kernells 9.2 vanilla or patched. -Install both, selecting the kernel with u want. -After, install Apple Graphics for Leopard, download it in Apple Site, AND DONT RESTART. -Get work CI and QE, and reboot. Link to comment Share on other sites More sharing options...
Falu Posted March 15, 2008 Share Posted March 15, 2008 Thanks alot my friend, I just updated to 10.5.2 Flawlessly and yes it is faster!!! Link to comment Share on other sites More sharing options...
netkas Posted March 15, 2008 Share Posted March 15, 2008 MorphewS after u installed graphics update, repeat step - adding device-id to x2000 kext. Link to comment Share on other sites More sharing options...
kernalzero Posted January 4, 2009 Share Posted January 4, 2009 so does this process allow you to use DVI? with this card. I have the same device ID but have tried basically the same process noted above without success. DVI stops working once i restart. I'd love dual display working too but I'd be happy with just DVI working over VGA...any help? Sapphire HD2400Pro 512MB DeviceID: 0x94c3 Link to comment Share on other sites More sharing options...
Recommended Posts