microsoft whiz Posted February 17, 2008 Share Posted February 17, 2008 Please post weather it worked or didnt work for you. In this format: PC: (your model here) HP a1410n Graphics: card model and if qe/ci Mobo: (model) Sound: (working yes or no) Extra items selected during install: Overall/Summary: (did it work for u?) or ask a question if u have a problem Link to comment Share on other sites More sharing options...
jetztsofort Posted February 17, 2008 Share Posted February 17, 2008 PC: AMD Athlon 64 3200+ Venice (SSE3) Graphics: NVidia GeForce 6600 GT PCI-E with QE/CI supported but (still) no DualDisplay/DualMonitor Mobo: EPOX 9HEAI Rev 3 with VIA VT8237R Chipset Sound: Yes but without volume-control - after installing another kext fully working with volume-control Extra items selected during install: the newer ToH-Kernel, NVidia kexts, EFI-MBR-Bootloader Overall/Summary: Works as good as 10.5.1 by Zeph, but still no DualDisplay and still bootproblem (the "sometimes-boot") Thanks to Zeph for this Release, very nice! Link to comment Share on other sites More sharing options...
DoiX Posted February 17, 2008 Share Posted February 17, 2008 PC: HP Pavilion t3310.it AMD Athlon 64 3200+ Venice (SSE2/3) Graphics: x200 integratred (had ci) Mobo: MSI-Amethyst Sound: AC97 (working) Extra items selected during install:AC97 audio driver sse3 kernel Overall/Summary: everything works fine(for a AMD machine) Link to comment Share on other sites More sharing options...
microsoft whiz Posted February 17, 2008 Author Share Posted February 17, 2008 i need to burn it, backup to an hd didnt work Link to comment Share on other sites More sharing options...
bushd Posted February 17, 2008 Share Posted February 17, 2008 PC: AMD X2 4600+ (SSE2/3) Graphics: ATI x1950gt 256mb (id 7288) - no QE/CI for the moment Mobo: ASRock ALiveSATA2-GLAN - SATA II not yet tested - else: perfect Sound: Realtek ALC888 - working with Azalia Extra items selected during install: EFI MBR, ATI 19x0, Azalia, ToH 9.2.0 Overall/Summary: Leopard woks very well and is very quick, but I have a little problem with some extra kexts. After booting, there comes an message that several kexts can not be loaded. I tried to repair permissions, but no success. Has somebody a solution? Link to comment Share on other sites More sharing options...
spartan Posted February 17, 2008 Share Posted February 17, 2008 After booting, there comes an message that several kexts can not be loaded. I tried to repair permissions, but no success. Has somebody a solution? The problem is the video card kexts (ATI 19x0 package). I have an ATI X1950XTX and the same thing happend. So I reinstalled without that video card package and there are no errors upon boot, however you still need to install proper drivers for resolution change and QE/CI. Link to comment Share on other sites More sharing options...
vbetts Posted February 17, 2008 Share Posted February 17, 2008 PC: HP Pavilion t3310.it AMD Athlon 64 3200+ Venice (SSE2/3)Graphics: x200 integratred (had ci) Mobo: MSI-Amethyst Sound: AC97 (working) Extra items selected during install:AC97 audio driver sse3 kernel Overall/Summary: everything works fine(for a AMD machine) The x200 had CI? Link to comment Share on other sites More sharing options...
zuz_242 Posted February 17, 2008 Share Posted February 17, 2008 PC: custom Graphics: gforce 8600gt qe/ci full Mobo: asus m2n sli (nforce 560 sli) Sound: onbord working NIC: external RTL working Extra items selected during install: kernel, nvidia gfx, nforce Overall/Summary: perfect, in one go Link to comment Share on other sites More sharing options...
bushd Posted February 17, 2008 Share Posted February 17, 2008 The problem is the video card kexts (ATI 19x0 package). I have an ATI X1950XTX and the same thing happend. So I reinstalled without that video card package and there are no errors upon boot, however you still need to install proper drivers for resolution change and QE/CI. thx spartan. i fixed it with deleting Natit.kext. Tried Bronyas Driver but it killed my System. So my Sapphire ATI x1950gt does not work correctly. I also tested SATA II but the System does not recognize any SATA-II-HDD, though I know it is able to, because on Zeph's 10.5.1 it worked. Link to comment Share on other sites More sharing options...
microsoft whiz Posted February 18, 2008 Author Share Posted February 18, 2008 For Some Reason I Get No Bootloader Link to comment Share on other sites More sharing options...
Jaredish Posted February 18, 2008 Share Posted February 18, 2008 AMD Althon 64 3700+Can't load account creation. After white screen with apple logo, screen goes black and goes back and forth from the grey loading screen to black screen.PC: Gateway GT4016Graphics: Nvidia GeForce 6100Mobo: First International ComputersSound: (no)Extra items selected during install: forcedeth, azailia audio, nvidia kextsOverall/Summary: (did it work for u?)No, can't load account creation. Get's past white apple screen, but turns black and continues to load but never completes past black screen. Link to comment Share on other sites More sharing options...
chris Posted February 18, 2008 Share Posted February 18, 2008 i am getting an error when the install comes up this happens in both normal install and safe (-x) mode. i see a white box with a O with a \ through.... anyone know what it means? see the photo. anyone have any ideas about this? my specs are CPU: AMD A64 X2 6000 3.0 AM2 MB: Gigabyte GA-M61P-S3 on board motherboard audio is : Realtek ALC883 codec chip on board motherboard lan is Realtec RTL8211 on board motherboard video: nvidia 6100/ nforce 430 chipset Mem: 1Gbx2 GSKILL Dvd: Lite On Hard Drive: SATA Seagate Link to comment Share on other sites More sharing options...
Almas Khan Posted February 18, 2008 Share Posted February 18, 2008 i am getting an error when the install comes up this happens in both normal install and safe (-x) mode. i see a white box with a O with a \ through.... anyone know what it means? see the photo. anyone have any ideas about this? my specs are CPU: AMD A64 X2 6000 3.0 AM2 MB: Gigabyte GA-M61P-S3 on board motherboard audio is : Realtek ALC883 codec chip on board motherboard lan is Realtec RTL8211 on board motherboard video: nvidia 6100/ nforce 430 chipset Mem: 1Gbx2 GSKILL Dvd: Lite On Hard Drive: SATA Seagate Have you tried -v at boot-up to find out what the kernel panic is? Link to comment Share on other sites More sharing options...
chris Posted February 18, 2008 Share Posted February 18, 2008 Have you tried -v at boot-up to find out what the kernel panic is? yes, just did, it says that it is waiting for the root device. Although I have made the af partition the active one in XP via diskpart.... is this In the command window, type: >> List disk >> Select disk [disk #] >> List partition >> create partition primary id=af >> active the same as this? sudo -s fdisk -e /dev/rdiskX --->(X is the number of your HD, if you have only on its 0) update f X --->(X is the number of the partition where you installed Leopard) w q reboot or would I need to do both? edit - this does not really matter, i tried to enter in -s mode, but it still said that it was "still waiting for root device" the funny thing here is that the 10.5.2 disk does not work with my SATA drive nor my ATA (ide) drive. The ide drive is the same drive that I used to install the Zeph 10.5.1 ver 1 to (which works great) so i am really at a loss. Link to comment Share on other sites More sharing options...
DoiX Posted February 18, 2008 Share Posted February 18, 2008 The x200 had CI? yes i experimented with some kext and i managed to get CI:Hardware accelerated and mirror Link to comment Share on other sites More sharing options...
brycedream Posted February 18, 2008 Share Posted February 18, 2008 Hi, (sorry for my english,, i'm french) I have a kernel panic on boot dvd :'( i take a screenshoot: http://brycedream.free.fr/mac/DSC00257.JPG http://brycedream.free.fr/mac/DSC00259.JPG Someone can help me? hd: Sata Dvd: ide (i try in usb but i always have the same error ) Thanks ps: on Irc (#AMD.osx68) i'm MiSSoury. Link to comment Share on other sites More sharing options...
Jaredish Posted February 18, 2008 Share Posted February 18, 2008 Bryce: Do you have an Nvidia GFX card? Link to comment Share on other sites More sharing options...
brycedream Posted February 18, 2008 Share Posted February 18, 2008 AMD Athlon 64, 2400 MHz 3400+ carte mère:MSI K8N Neo (MS-7030) (chpiset nVIDIA nForce3 250Gb) Carte vidéo NVIDIA GeForce 6800 (128 Mo) Ram :1.5Go Link to comment Share on other sites More sharing options...
ccfly-1000 Posted February 18, 2008 Share Posted February 18, 2008 hi benq p52 turion x2 1800mhz ati x1600 gfc problem is when it finish installation he start installation again after restart when i take dvd out and in boot option i pick usb i got winxp boot like he cant boot from usb hdd help Link to comment Share on other sites More sharing options...
freshhh Posted February 18, 2008 Share Posted February 18, 2008 PC: Custom see Sig. Graphics: 7600gt xfx pci-e looks fine Mobo: A8n-sli premium nforce4 on, marvel off,silicon off Sound: NOT WORKING alc850,i installed using the ac'97 option.Didnt work so then i tried azalia and other kext but no luck Extra items selected during install: SSE3 (new version),Nvidia drivers,nv4chipset,guid boot,ac'97 and i dont remember the rest. Overall/Summary: Great release:I didnt have to press all the -v-t-r-e-s-g-h-cpu=700 bull$hit! It installed in the first take.It took 30 min without the language packs. If i could make the sound work i would be amazingly happy!!! Link to comment Share on other sites More sharing options...
Gumpo Posted February 18, 2008 Share Posted February 18, 2008 I assume this is not a SSE2 release? Which means I wasted around 8 hours today. Nice. Back to Jas 10.4.8, the only release to have ever worked on my dinosaur A64. Somehow I managed to get an install screen, that is an improvement over all the other versions I have tried. Nice work there But the usual happens... black/grey blinking screen, waiting for root, unifinished install etc etc. I have basically tried every conceivable setup from the install screen. I believe it would have been easier for people if the name of the release included the standard (sse2/sse3) description. A64 3400+ SSE2 (S754) Abit KV8-MAX3 GF6800U Link to comment Share on other sites More sharing options...
TomH Posted February 18, 2008 Share Posted February 18, 2008 Hey together, i've got a problem. Finally, after 6 hours of installation i restarted my system. I tried to boot Leopard but instead of booting i only saw a blinking _ So i searched for a tutorial how to make the partition active and did every step mentioned there: fdisk -e /dev/rdiskXfdisk: 0>update fdisk:*0> f Y “Partition 2 marked active” fdisk:*0> w Device could not be accessed exclusively. A reboot will be needed for changes to take effect. OK? [n]y Writing MBR at offset 0. fdisk: 0> q Now, when i restart my system it shows me b0 error Did i forget something or what is wrong with my installation? It could be possible that i really forgot something because i'm a noob if it comes to hackintosh stuff. So please be patient ^^ Thanks, Tom //edit I've chosen GUID instead of MBR ... just to let you know. Don't know if it's worth to get mentioned //edit 2 One weird thing that happened is that fdisk: 0>updatefdisk:*0> f Y changed to fdisk: 1>updatefdisk:*1> f Y itself. I dont know why since i typed ...rdisk0 //another edit ^^ Well, i think i did a few things completely wrong. First thing is, that i better had chosen the MBR option instead of GUID. Next thing is the name, i had no keyboard while installing (PS2) so i left the original name: "unbenannte partition 1" or similar. I think i'll install it again today in the evening. Link to comment Share on other sites More sharing options...
gaz919 Posted February 18, 2008 Share Posted February 18, 2008 So could someone please tell me Does Having EFI now mean we can use the guid setting when partitioning rather than the mbr? and still boot from the guid partition without problems. I read that you needed to use mbr to partition the bootable drive, can we use guid now? Link to comment Share on other sites More sharing options...
woody970 Posted February 18, 2008 Share Posted February 18, 2008 I Finished downloading the Zephyroth's 10.5.2 from the usenets location listed in another thread. I unpacked the files using Parchive with no errors and burned the iso to a dvd using 1X burn speed. When I try to boot off the DVD I keep getting the screen that tells me to power off the machine and power back on. How do I get by this? Machine Specifications: (Home Grown) OS: MacOSX Leopard 10.5.1 by Zephyroth Processor: AMD Athlon™ 64 3200+ / MMX, 3DNow!, SSE, SSE2, SSE3, x86-64 Motherboard: MSi K8N-Neo3 Platinum (MS-7025) Graphics: NVidia GeForce FX 5200 Hard Drive: Seagate (160 GB) IDE Sound card: Realtek AC97 Audio Memory: 1 GB Link to comment Share on other sites More sharing options...
StankBacon™ Posted February 18, 2008 Share Posted February 18, 2008 amd x2 4600+ asus m2n-sli deluxe mobo 2gb ddr 800mhz ram 120gb sata hd dvd-rw ide install failed.. verifies install dvd, starts install for about 30 seconds, then fails with a "install could not be completed because no software was found to install" tried with various install options, always fails. :'( i tried his 10.5.1 dvd on the bay and that never even was able to format the disc, so i guess this one is a step in the right direction Link to comment Share on other sites More sharing options...
Recommended Posts