Lor-ron Posted March 18, 2009 Share Posted March 18, 2009 I have tried Unsuccessfully to upgrade my Kalyway Leopard from 10.5.3 to 10.5.6 Countless Times and has Always ended with a System Boot Freeze on StartUp but with the help of a Self Modified Version of LTL's Post Patcher and some Custom Kext Files for my Asus P5K-E Wifi AP Motherboard I was able to get it Done! 1.) Use Kalyway's Method to Upgrade to 10.5.3 if you are not using this Version already... (I used the Vanilla Kernel) 2.) Download and Install the 10.5.6 Combo Update from Apple (668Mb)... Do Not Reboot!!! http://www.apple.com/downloads/macosx/appl...omboupdate.html 3.) Edit the Post-Patch.sh File Located in the v4.4 Folder with the Name of Your Leopard Install Hard Drive (Located at the Top of the Page) (Ex; Destination=yourharddrivename) Save and use the Following Command Lines to Run the Program from Terminal... . Open Terminal . TYPE or cut n past into Terminal: sudo -s . enter your password . TYPE or cut n paste into Terminal: /usr/sbin/vsdbutil -a /Volumes/Leopard320 <==== (Rename this to your Hard Drive Volume) . TYPE or cut n paste into Terminal (change yourusernamehere to your username): cd /users/yourusernamehere/desktop/v4.4 . TYPE or cut n paste into Terminal: ./post-patch.sh . after it finishes TYPE: Exit and Press Enter. . Reboot Your PC and Press F8 at the Darwin Prompt and Type: Update -v and Hit Enter. Download My Modified PostPatch Prog Here: http://rapidshare.com/files/210680288/v4.4.zip.html Link 2: http://www.mediafire.com/file/dgnj21ygmnt/v4.4.zip Congratulations you are now running Leopard 10.5.6!!! Link to comment Share on other sites More sharing options...
Recommended Posts