Jump to content

[The Final Guide]How to install Tubgirl(Should apply to other AMD OSX disc) on Asus M2NPV series!


  • Please log in to reply
13 replies to this topic

#1
iNoob

iNoob

    Powered by Intel Core 2 Duo 

  • Members
  • PipPipPipPipPip
  • 292 posts
  • Gender:Male
1. If you have SATA and your disc doesn't have the new nForce SATA kext, use the VMware-to-native method or modify the ISO. These processes are well explained in the forum.
2. Install like you would do on a Mac. Remember: Empty disks MUST be partitioned using MBR. To do it, open Disk Utility on the DVD and select your HD. Then go to the "Partition" tab, click "Options" and choose "Master Boot Record". If you are installing to a HD which has other OS(es) installed, you don't need to do this.
3. Setup your system. I did even registered my system with Apple! ;)
4. Install drivers. See bottom of page.
5. If you have other expansion cards, such as I which have a D-Link DWL-G510 B1 wireless card, install drivers for them.
6. Install fixes if you need them.
7. Enjoy!
8. Report you results, specifying your system, install method and disk. :D
Driver List:

Ethernet: http://forum.insanel...showtopic=73317
Edit IOPCIMatch string to add 0x026910de. Works in Tiger, may not work in Leo. Also try this, works on 10.5: http://forum.insanel...mp;#entry638200
SATA: http://forum.insanel...o...ic=77071
All four ports work, don't expect NCQ to work either. Read-write, even with large files.
IGP: (No QE/CI) http://rapidshare.co...81.pkg.zip.html
Macvidia 1.0.81, delete NVidiaGL.bundle and NVidiaGA.plugin to avoid panics. If you want only 1024x768x32@60, remove NVDAResman.kext. All files are inside the /System/Library/Extensions folder.
To make PS/2 mouse and keyboard work: Disable USB legacy support on the BIOS Setup. No, you will still be able to use USB keyboard and mice.

Edited by iNoob, 08 May 2008 - 08:55 AM.


#2
faj3r

faj3r

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts
Hi,
thanks for the tutorial.

I have a question - maybe stupid one, but... - if it should works on M2NPV, should it also work on my M2N-MX (nForce 430)?

I have many problems with it, and I haven't solved them yet.

#3
identity

identity

    Voodoo fan

  • Members
  • PipPipPipPip
  • 196 posts
  • Gender:Male
  • Location:INDIA

Hi,
thanks for the tutorial.

I have a question - maybe stupid one, but... - if it should works on M2NPV, should it also work on my M2N-MX (nForce 430)?

I have many problems with it, and I haven't solved them yet.



if gpu is same it may work...

#4
taga

taga

    InsanelyMac Protégé

  • Members
  • Pip
  • 34 posts
  • Gender:Male
hello , instal leoall v3 in asus m2npv-vm , perfect , only network not funcion

please i need drivers for network

thanks

sorry my english , i brazilian

#5
Marco Pita

Marco Pita

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 3 posts
  • Gender:Male
  • Location:Helsinki
Hi!

That link for the second Ethernet work-around doesn't seem to be working. And I tried to find NVidiaGL.bundle and NVidiaGA.plugin on Extensions folder but they are not there. I got kernel panic.. :D I have a Geforce 6150 and zephyroth 10.5.2 rev 2.

#6
loest

loest

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts
  • Gender:Male
i have instaled leo4all v2 here verry easy (just 4 instalation until work)
and now i get all working but audio u must reinstal azalia driver and network need to reinstal forcedeth too
and now im trying figure out how to make my system able to sleep
since this is verru usefull for me

if any one had an idea for help me
and some one know how efi work i dont remenber at instalation if i need to do it there or can make it now

and if some one need my files for network and audio just pm me

#7
iNoob

iNoob

    Powered by Intel Core 2 Duo 

  • Members
  • PipPipPipPipPip
  • 292 posts
  • Gender:Male
I can't have sleep for now.

#8
loest

loest

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts
  • Gender:Male
i think maybe this can be because some thing about ps/2 suporte
becase my winxp cant sleep now too
and i aways use it before instal hackintosh
what u think?

#9
Lord Xenu

Lord Xenu

    InsanelyMac Protégé

  • Members
  • Pip
  • 5 posts
Do you know the device & vendor ID of the SATA controller for M2NPV-VM?

I've installed the SATA kext, but it doesn't seem to work :) .

#10
iNoob

iNoob

    Powered by Intel Core 2 Duo 

  • Members
  • PipPipPipPipPip
  • 292 posts
  • Gender:Male
On mine works perfect. Have you setted correct permissions for it?

#11
Lord Xenu

Lord Xenu

    InsanelyMac Protégé

  • Members
  • Pip
  • 5 posts

On mine works perfect. Have you setted correct permissions for it?

I used Kext Helper to install the kext. Should I perform "diskutil repairpermissions /" command?

#12
identity

identity

    Voodoo fan

  • Members
  • PipPipPipPip
  • 196 posts
  • Gender:Male
  • Location:INDIA
perfect driver for Ethernet...
http://forum.insanel...howtopic=125569
0.61.2alpha_osx works perfectly not tested others...

edit:forgot to mention add driverid 0x026910de to info.plist

#13
bestestever

bestestever

    InsanelyMac Protégé

  • Members
  • Pip
  • 37 posts
  • Gender:Male
  • Location:Caddy Michgan, United States
  • Interests:Computers!
i know this is old but i would just like to thank identity and inoob!

I LOVE you guys,

This made almost everything on my ASUS a8n vm csm work.
so thank you,

The only thing i still cannot use is the graphics.

#14
Mäcen

Mäcen

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 3 posts
I have done an installation on the same motherboard. I used iAtkos v7 10.5.7. Chameleon v2, DSDT, AppleDecrypt, Voodoo 9.7 Kernel, Disabler, OHR, nForce ATA/SATA.
After install I used the nForce LAN driver, Azalia Audio and MacVidia 1.0.81 to get resolution change (no CI/QE).





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2017 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy