Jump to content

CardBus/PCMCIA PC Cards for Leopard


  • Please log in to reply
1070 replies to this topic

#961
Panda_N_Shark

Panda_N_Shark

    InsanelyMac Protégé

  • Members
  • Pip
  • 8 posts

Hi,

It actually one kext. You just need to install IOPCMCIAFamily.kext. In the IOPCMCIAFamily.kext, it contain IOPCIFamily.kext & IOPCCardFamily.kext. I think you installed it correctly....just maybe redundant...but ok. Installing using KextHelper is highly recommended.

Check in "System Profiler" to determine if the kext load successfully or not.
Posted Image

As for your Atheros, AR5006EG is a beast. :D I mean it was difficult to get it working. Someone has posted guideline to get AR5006EG working. Check this post:-
http://www.insanelym...p;#entry1101087

Good luck. :)

kizwan


Hy that post talk about install the version 2.1.2 and last time i did that i win a re install because kernel panic :S

About the image i get the IOPCIFamily but not the IOPCCardFamily, i reiinstall again the main kext and then the single card reboot a few times and nothing :s

Hy that post talk about install the version 2.1.2 and last time i did that i win a re install because kernel panic :S

About the image i get the IOPCIFamily but not the IOPCCardFamily, i reiinstall again the main kext and then the single card reboot a few times and nothing :s



Again... kernel panic :'( Anyway i can resolve this kernel panic without full reinstall? Can't go into -s option...

#962
kizwan

kizwan

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 1,422 posts

Hy that post talk about install the version 2.1.2 and last time i did that i win a re install because kernel panic :S

About the image i get the IOPCIFamily but not the IOPCCardFamily, i reiinstall again the main kext and then the single card reboot a few times and nothing :s

EDIT: Please post the screenshot of your System Profiler. Just like I did & make sure to select "IOPCIfamily" so that I can see which version did load. Thank you. :)

Sorry, I don't understand... Did you fix the permissions & clear kext cache after installing the kext? Try boot with "-f" & see what happen.

Again... kernel panic :'( Anyway i can resolve this kernel panic without full reinstall? Can't go into -s option...


You can fix it by removing "IO80211Family.kext" version 2.1.2 from "/System/Library/Extensions/" folder. To do that, boot with the OS X installer DVD & open terminal to remove the kext file. You do backup the original one, don't you?

kizwan

#963
Panda_N_Shark

Panda_N_Shark

    InsanelyMac Protégé

  • Members
  • Pip
  • 8 posts

EDIT: Please post the screenshot of your System Profiler. Just like I did & make sure to select "IOPCIfamily" so that I can see which version did load. Thank you. :thumbsup_anim:

Sorry, I don't understand... Did you fix the permissions & clear kext cache after installing the kext? Try boot with "-f" & see what happen.
You can fix it by removing "IO80211Family.kext" version 2.1.2 from "/System/Library/Extensions/" folder. To do that, boot with the OS X installer DVD & open terminal to remove the kext file. You do backup the original one, don't you?

kizwan


Hy! I remove the 3 kext i have in extensions then i only install latest IOPCMCIAFamily.kext always with the "khelper" then reboot and get the kernel panic! I didn't even install 2.1.2...

Now i can't boot, i doon't have a external dvd (i get one borrow for install) i will try to put the OSX dvd into 8gb sd card...

Can't boot with -v, -s or -f always get kernel panic . With one i get a more detail info..

I see something like
could'd alloc class "AppleACPIPlatformExpert" panic .....

#964
kizwan

kizwan

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 1,422 posts

<br />Hy! I remove the 3 kext i have in extensions then i only install latest IOPCMCIAFamily.kext always with the &quot;khelper&quot; then reboot and get the kernel panic! I didn't even install 2.1.2... <br /><br />Now i can't boot, i doon't have a external dvd (i get one borrow for install) i will try to put the OSX dvd into 8gb sd card...<br /><br />Can't boot with -v, -s or -f always get kernel panic . With one i get a more detail info..<br /><br />I see something like<br />could'd alloc class &quot;AppleACPIPlatformExpert&quot; panic .....<br /><br />

<br /><br /><br />

Hi,

By saying the latest IOPCMCIAFamily.kext, that mean you installed IOPCMCIAFamily.kext for 10.5.6 right? Because if you installed IOPCMCIAFamily.kext for leopard 10.5.5 & below, there is high chance that you may experience kernel panic. If you did installed IOPCMCIAFamily.kext for 10.5.6, maybe it is not compatible with your PC. So you do really need to boot with OS X DVD to fix the problem. You need to remove IOPCMCIAFamily.kext from your extensions folder. If you can post the screenshot of that kernel panic, it will help me to determine what going wrong. Also, can you explain to me how you installed IOPCMCIAFamily.kext & how you fix the file permissions?

You can put OS X DVD installer into 4GB or 8GB thumbdrive using "Disk Utility". Of course you need to boot from the OS X DVD installer to access "Disk Utility" program. :wallbash: Use "Restore" function in the "Disk Utility" program to copy OS X DVD content to your thumbdrive.

Good luck. :)

kizwan

#965
Panda_N_Shark

Panda_N_Shark

    InsanelyMac Protégé

  • Members
  • Pip
  • 8 posts

Hy! I remove the 3 kext i have in extensions then i only install latest IOPCMCIAFamily.kext always with the "khelper" then reboot and get the kernel panic! I didn't even install 2.1.2...

Now i can't boot, i doon't have a external dvd (i get one borrow for install) i will try to put the OSX dvd into 8gb sd card...

Can't boot with -v, -s or -f always get kernel panic . With one i get a more detail info..

I see something like
could'd alloc class "AppleACPIPlatformExpert" panic .....


Anyway without a mac put the dvd installation iso into a usb and boot it?

#966
kizwan

kizwan

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 1,422 posts

Anyway without a mac put the dvd installation iso into a usb and boot it?


Beside "Disk Utility", I don't know any utility that can do that. I'll let you know if I found one.

Do you have extra external harddisk or thumbdrive that big enough (> 8GB) to hold OS X? If you have one, install OS X into it & use it to put OS X installation DVD to thumbdrive (bootable). It can be use later as "rescue disk".

kizwan

#967
frank_no_code

frank_no_code

    InsanelyMac Protégé

  • Members
  • Pip
  • 17 posts
here are my DCPI Manager e ISPCI results.
in which way and which version i have to "install"? choose or replace is the same thing? i have to use kext helper ?
thk U

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1)
05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
06:04.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller [1524:1412] (rev 10)
06:04.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0530] (rev 01)
06:04.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller [1524:0550] (rev 01)
06:04.3 FLASH memory [0501]: ENE Technology Inc FLASH memory: ENE Technology Inc: [1524:0520] (rev 01)
06:04.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller [1524:0551] (rev 01)

Attached Files



#968
danillll

danillll

    InsanelyMac Protégé

  • Members
  • Pip
  • 26 posts
@Eureka,
I would first like to thank you for the time and effort you invested in this driver.
I've been using your PCMCIA rev8, this fixed a major issue in my setup, which is the long boot time where the system taked over 20 minutes to start OS x.

I got 2 quick questions:

1) I tried your latest rev for 10.5.6 , however, after applying it the system wouldn't boot, it just hangs (still not sure if I am getting long boot time again) , is there any major change between rev8 and the latest rev? Anything suggestion I can try? any logs you want me to provide?

2) I have Ricoh 5C476 (II) on my HP 8510w which is not working eith rev8 , is there anything I can do to fix this.

Thanks

Dani

#969
Panda_N_Shark

Panda_N_Shark

    InsanelyMac Protégé

  • Members
  • Pip
  • 8 posts

Beside "Disk Utility", I don't know any utility that can do that. I'll let you know if I found one.

Do you have extra external harddisk or thumbdrive that big enough (> 8GB) to hold OS X? If you have one, install OS X into it & use it to put OS X installation DVD to thumbdrive (bootable). It can be use later as "rescue disk".

kizwan

Yes i have... know i install again osx (i will try now with linux in the same 16gb ssd) But before i want do that (put OSX installation into my 8gb sdcard)

#970
danillll

danillll

    InsanelyMac Protégé

  • Members
  • Pip
  • 26 posts
Hello Chun-nan,

This is a picture that shows the laptop hangs when using the latest rev for 10.5.6, http://www.mediafire...04e75f6e8ebb871

The log shows no error, please let me know if you have any suggestion, thanks

Dani

#971
jazzminos

jazzminos

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 148 posts
Hi everyone!

When I updated from 10.5.5 iATKOS 5i I experienced a problem with Intel Pro 100VE (0x10928086) Ethernet card. Card is always "cable unplugged" state. I tried everything from the topic about Intel Pro 100VE ( http://www.insanelym...p...4840&st=160 ) I installed LATEST IOPCMCIAFamily.kext (10.5.6 ONLY). After using dmesg | grep PC as root Terminal says:

*********************************************************************
sh-3.2# dmesg | grep PC
OpenHaltRestart: 2008 \M-B\M-) COPYRIGHT PSYSTAR CORPORATION (www.psystar.com)Extension "com.apple.driver.ApplePCIConfigurator" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
IOPCCard info: Mac OS X PCMCIA Card Services 3.3.0
IOPCCard info: options: [pci] [cardbus] [pnp]
IOPCCard info: Intel ISA/PCI/CardBus PCIC probe:
IOPCCard info: TI XX12 rev 00 PCI-to-CardBus phys mem 0xd0108000 virt mem 0x48269000
IOPCCard info: host opts [0]: [serial pci & irq] [pci irq 17] [lat 168/176] [bus 2/2]
IOPCCard info: PCI card interrupts, PCI status changes
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPIIXATARoot/PRID@0/AppleIntelICHxSATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/Hitachi HTS545050KTA300 Hitachi HTS545050KTA300/IOFDiskPartitionScheme/Untitled 1@1
sh-3.2#
**********************************************************************

Can this help understanding problem with network adapter?

Thanks for attention.

With great respect, jazzminos.

Attached Files



#972
danillll

danillll

    InsanelyMac Protégé

  • Members
  • Pip
  • 26 posts

Hello Chun-nan,

This is a picture that shows the laptop hangs when using the latest rev for 10.5.6, http://www.mediafire...04e75f6e8ebb871

The log shows no error, please let me know if you have any suggestion, thanks

Dani


Any help on this one please....

#973
vickgehenk

vickgehenk

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 3 posts
heloo everyone..
i have trouble PCMCIA(i'm using Novatel Merlin U630) in my Thosiba A100..
i have installed IOPCCardFamily.kext for 10.5.6(now i'm using xxx 10.5.6)
the troble is,when i insert the PC card/PCMCIA my screen FRIZZZ after a few minute..
but if eject PCMCIA,,my screen back normal..
can everyone help me..

tanks

#974
elche

elche

    InsanelyMac Protégé

  • Members
  • Pip
  • 4 posts
  • Gender:Male
  • Location:L'Aquila - Italy
Hi guys,
First of all I want to thank everyone for making this forum so useful and full of nice information.

I'm experiencing some problems with 10.5.6 PCMCIA driver (IOPCCardFamily.kext and IOPCIFamily.kext I've used are both 3.3.0) that make my PCMCIA work like a charm but give me problems with USB hubs on my Lenovo T61.
The situation is this: sometimes, more often when AC adapter is plugged in, the USB Hubs of fingerprint readed / bluetooth or the one of the right side USB port simply do not work.
They don't even appear in the system profiler.

The strange thing is that this doesn't happen every time I boot, but almost random.

The IOPCMCIAFamily.kext make also work my sleep, a bit strange actually, without the small moon but seems real sleep, fan and disk are totally quiet.

I've tried to rename the kext and use the IOPCIFamily.kext 2.5.4 and USB work fine, no sleep in this way (system wakes up after 3 seconds) and no PC Card.

Any ideas of the connection between PCMCIA driver and USB hubs?

Thanks

#975
kizwan

kizwan

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 1,422 posts

Hi guys,
.................................

The IOPCMCIAFamily.kext make also work my sleep, a bit strange actually, without the small moon but seems real sleep, fan and disk are totally quiet.

I've tried to rename the kext and use the IOPCIFamily.kext 2.5.4 and USB work fine, no sleep in this way (system wakes up after 3 seconds) and no PC Card.

Any ideas of the connection between PCMCIA driver and USB hubs?

Thanks


Hi,

Do you see any message in log file when it happen?

kizwan

#976
elche

elche

    InsanelyMac Protégé

  • Members
  • Pip
  • 4 posts
  • Gender:Male
  • Location:L'Aquila - Italy

Hi,

Do you see any message in log file when it happen?

kizwan


The only messages that seem to be related to this problem are this, just before loading the PCMCIA drivers:



When it works:



Mar 20 12:16:28 localhost kernel[0]: USBF: 0.663 AppleUSBEHCI[0x384a000]: unable to get filterInterruptEventSource

Mar 20 12:16:28 localhost kernel[0]: USBF: 0.663 AppleUSBEHCI[0x384a000]::UIMInitialize - Error occurred (0xe00002be)

Mar 20 12:16:28 localhost kernel[0]: USBF: 0.665 AppleUSBEHCI: unable to initialize UIM

Mar 20 12:16:28 localhost kernel[0]: IOPCCard info: Mac OS X PCMCIA Card Services 3.3.0

Mar 20 12:16:28 localhost kernel[0]: IOPCCard info: options: [pci] [cardbus] [pnp]

Mar 20 12:16:28 localhost kernel[0]: IOPCCard info: Intel ISA/PCI/CardBus PCIC probe:

Mar 20 12:16:28 localhost kernel[0]: IOPCCard info: Ricoh RL5C476 rev ba PCI-to-CardBus phys mem 0x7e100000 virt mem 0x34a57000

Mar 20 12:16:28 localhost kernel[0]: IOPCCard info: host opts [0]: [pci only] [io 3/6/1] [mem 3/6/1] [pci irq 16] [lat 168/176] [bus 22/24]

Mar 20 12:16:28 localhost kernel[0]: IOPCCard info: PCI card interrupts, PCI status changes



When it doesn't work:



Mar 20 12:02:53 localhost kernel[0]: USBF: 0.616 AppleUSBUHCI: unable to initialize UIM

Mar 20 12:02:53 localhost kernel[0]: USBF: 0.620 AppleUSBUHCI: unable to initialize UIM

Mar 20 12:02:53 localhost kernel[0]: IOPCCard info: Mac OS X PCMCIA Card Services 3.3.0

Mar 20 12:02:53 localhost kernel[0]: IOPCCard info: options: [pci] [cardbus] [pnp]

Mar 20 12:02:53 localhost kernel[0]: IOPCCard info: Intel ISA/PCI/CardBus PCIC probe:

Mar 20 12:02:53 localhost kernel[0]: IOPCCard info: Ricoh RL5C476 rev ba PCI-to-CardBus phys mem 0x7e100000 virt mem 0x348f8000

Mar 20 12:02:53 localhost kernel[0]: IOPCCard info: host opts [0]: [pci only] [io 3/6/1] [mem 3/6/1] [pci irq 16] [lat 168/176] [bus 22/24]

Mar 20 12:02:53 localhost kernel[0]: IOPCCard info: PCI card interrupts, PCI status changes



There's another thing that happen togheter with the USB issue, the fan keeps running for several seconds at shutdown before the PC actually shuts down.

#977
kizwan

kizwan

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 1,422 posts
Hi elcheT61,

I don't know what exactly caused it but maybe IOPCIFamily.kext v3.3.0 (included with IOPCMCIAFamily.kext) may have conflict with your hardware. Perhaps it unable to initialize the devices properly. Since you need PCMCIA, you don't have much choice if you're on 10.5.6. Did you try Slice's driver for USB 2.0? Try go to this thread:-
USB 2.0 for Leopard, Also with sleep support. Last release.

Good luck. :)

kizwan

#978
elche

elche

    InsanelyMac Protégé

  • Members
  • Pip
  • 4 posts
  • Gender:Male
  • Location:L'Aquila - Italy

Hi elcheT61,

I don't know what exactly caused it but maybe IOPCIFamily.kext v3.3.0 (included with IOPCMCIAFamily.kext) may have conflict with your hardware. Perhaps it unable to initialize the devices properly. Since you need PCMCIA, you don't have much choice if you're on 10.5.6. Did you try Slice's driver for USB 2.0? Try go to this thread:-
USB 2.0 for Leopard, Also with sleep support. Last release.

Good luck. :)

kizwan


Thanks kizwan, I'm already on Slice's USB drivers. They worked nice but I guess that you're right, I've to accept the situation (not bad really :D ).

The difficulty in trying to understand is that the problem does not always occur, seems to be a bit random.

Bye

#979
kizwan

kizwan

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 1,422 posts

................
The difficulty in trying to understand is that the problem does not always occur, seems to be a bit random.

Bye


I agree. :( It happen to my DVD drive when I'm using 10.5.5 (JaS 10.5.4 updated to 10.5.5 using Software Update). Sometime the DVD drive just disappear, undetected. I don't know what caused it. It really strange....no error message at all.

Actually, if you're using older leopard, for example 10.5.5 & lower, you can try other (older) version like rev8, beta 3 & etc. But if you're using 10.5.6, there is only one version for it. That is why I'm saying you don't have much choice. :( I have tried older version on 10.5.6, it just caused error & kernel panic.

~Eureka also have it own USB driver (AppleUSBController.kext), available at mediafire, the same place where you get the IOPCMCIAFamily.kext. You may want to give it a try. You just need to put it in /System/Library/Extensions/ folder. You also need to put back the original IOUSBFamily.kext, just in case. ~Eureka's driver will override AppleUSBUHCI & AppleUSBEHCI.

Good luck. :)

kizwan

#980
danillll

danillll

    InsanelyMac Protégé

  • Members
  • Pip
  • 26 posts
This is my 3rd post on this thread and I hope this time I get some help :unsure:
I got another laptop from the one described previously, and I have the following question.

I need help figuring out why my PCMIA wireless MN-720 is not being picked up by the OS.
I am running os x 10.5.6 on my HP 2510p, I used Chun-nan pci driver to enable the PCMIA slots.

I bought the MN-720 wireless PCMIA adapter, which has a broadcom chipset that supposed to be natively supported.
However, when I insert the card, I can see it on the finder bar with an option to turn it off, and two grayed out options "Broadcom and "802.11b cardbus" however the Airport icon is not being displayed.

Looking at dmesg, I see that the cardbus has been activated

IOPCCard info: cs: cb_free(bus 3)
IOPCCard: shutting down socket 0.
IOPCCard: calling terminate on socket 0 function 0 nub 0x3b39000.
IOCardBusDevice: releasing socket 0 function 0 from card services.
IOPCCard info: cs: cb_alloc(bus 3): vendor 0x14e4, device 0x4325
IOPCCard info: cs: cb_alloc(bus 3): found 1 functions
IOCardBusDevice: binding socket 0 function 0 to card services.
IOPCCard info: cs: cb_config(bus 3)
IOPCCard info: fn 0 bar 1: mem 0xa0002000-0xa0003fff
IOPCCard info: irq 18


I also double checked the info file for AppleAirPortBrcm4311 and made sure that my model ID is there
<string>pci14e4,4325</string>

and it seems that the "AppleAirPortBrcm4311" driver is not seeing the card or something.

ioreg does not show the driver being used

| | +-o C0B1@1E <class IOPCIDevice, registered, matched, active, busy 0, retain 12>
| | | +-o IOPCI2PCIBridge <class IOPCI2PCIBridge, registered, matched, active, busy 0, retain 13>
| | | +-o C2A2@6 <class IOPCIDevice, registered, matched, active, busy 0, retain 8>
| | | | +-o IOPCCardBridge <class IOPCCardBridge, registered, matched, active, busy 0, retain 7>
| | | | +-o pci14e4,4325@0 <class IOCardBusDevice, registered, matched, active, busy 0, retain 9>
| | | +-o pci1180,843@6,3 <class IOPCIDevice, registered, matched, active, busy 0, retain 6>
| | | +-o pci1180,822@6,2 <class IOPCIDevice, registered, matched, active, busy 0, retain 6>
| | | +-o pci1180,832@6,1 <class IOPCIDevice, registered, matched, active, busy 0, retain 8>
| | | +-o AppleFWOHCI <class AppleFWOHCI, !registered, !matched, active, busy 0, retain 6>


although kexstat shows that the driver is being loaded

bash-3.2# kextstat | grep -i air
82 0 0x4091a000 0x141000 0x140000 com.apple.driver.AirPortBrcm43xx (361.24.1) <81 76 17 7 6 5 4 2>


Any idea what's going on and why the OS is not assigning .AirPortBrcm43xx to my card so I can use wireless.

Any suggestion is very appreciated
Thanks





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy