Wallymc Posted August 9, 2009 Share Posted August 9, 2009 Hi, Update 10.5.8 does not work correctly for me. Error mention: 'Couldnt alloc class "AppleHDAController" From path: "uuid" Waiting for boot volume with UUID ............. Still waiting for root device' The computer will not start up. It is strange that the computer (in safe mode) works properly. I have already tried the following: * Reinstalled the MAC OS X 10.5.8 combo update and the 10.5.8 Jimmy's .kext pack. * Repaired the rights and permissions; * Reinstalled ApplaHDA the holder of 'AppleHDAController I'm not sure ?' separately and again; * Swapped Apple HDA 10.5.8 with 10.5.7 But I think they are the same. They come both from the construction year 2008. With 10.5.7 my system works perfectly and entirely proper. I have a back-up but it would be great if 10.5.8 still should work. Someone a suggestion? Thanks, Greetings, Wally Link to comment Share on other sites More sharing options...
Jimmy Mallmann Posted August 9, 2009 Author Share Posted August 9, 2009 Hi, try the new installer (link) ... Link to comment Share on other sites More sharing options...
Wallymc Posted August 9, 2009 Share Posted August 9, 2009 Hi, try the new installer (link) I have tried the 10.5.8 package from the main page 2/3 hours ago. How old is the package of your link? Thank you. Wally Link to comment Share on other sites More sharing options...
A Posted August 9, 2009 Share Posted August 9, 2009 going to update in a second on my mirrored partition. Hope I can still use the HDA kext that Trauma! posted -- VoodooHDA always crackles here on two nearly identical setups.. Link to comment Share on other sites More sharing options...
A Posted August 9, 2009 Share Posted August 9, 2009 works fine --- but I feel like I am getting mouse skips - simillar to those on 10.5.6 (with the newer quicktime version) hmmmmmm Edit: just saw theres a quicktime update in software that I did not install - going to do that now Link to comment Share on other sites More sharing options...
Jimmy Mallmann Posted August 9, 2009 Author Share Posted August 9, 2009 I have solved the permitions problem, and edited the AppleIntelPIIXATA.kext for compatibility Note: You must not use any Legacy Audio Kexts with voodoohda installed! Remove them first! I have tried the 10.5.8 package from the main page 2/3 hours ago. How old is the package of your link? Thank you. Wally The VooDooHDA has been updated, now with front mic support, no crackles. going to update in a second on my mirrored partition.Hope I can still use the HDA kext that Trauma! posted -- VoodooHDA always crackles here on two nearly identical setups.. Link to comment Share on other sites More sharing options...
ViniciusMaran Posted August 9, 2009 Share Posted August 9, 2009 works fine --- but I feel like I am getting mouse skips - simillar to those on 10.5.6 (with the newer quicktime version) hmmmmmm Edit: just saw theres a quicktime update in software that I did not install - going to do that now Just make a backup of AppleUpstreamUserClient.kext and remove it from /System/Library/Extensions/ You don't need to downgrade Quicktime Link to comment Share on other sites More sharing options...
Jimmy Mallmann Posted August 9, 2009 Author Share Posted August 9, 2009 Hi everybody! Well, as the P5K-SE is not my primary "Hack" right now, I´d appreciate your testing in order to make a stable Installer . As far as I have tested, it should work fine, including audio with front mic support, with little system modification, it means, a more pure vanilla system. Thank everybody for the support over these 2 years! Much appreciated, indeed! Link to comment Share on other sites More sharing options...
jolibabe Posted August 9, 2009 Share Posted August 9, 2009 Hi, I had a working version, but when i installed P5K-Family_10.5.8.pkg i cannot no longer boot due to 'still waiting for boot devices' what can i do? Link to comment Share on other sites More sharing options...
Wallymc Posted August 9, 2009 Share Posted August 9, 2009 I have tried the 10.5.8 package from the main page 2/3 hours ago. How old is the package of your link? Thank you. Wally It seems that the IOUSBFamily.kext driver by Slice makes my problems. I have removed it and the computer boots now. However it remains strange, the IOUSBFamily.kext does not differ in 10.5.8 compared to 10.5.7. Both come from the production year 2008. So a modified version should work on 10.5.7 and 10.5.8? Hi, I had a working version, but when i installed P5K-Family_10.5.8.pkg i cannot no longer boot due to 'still waiting for boot devices' what can i do? I had the same problem. I have removed the IOUSBFamily .kext driver by Slice. After that i reinstalled the MAC OS X 10.5.8 combo update and the 10.5.8 Jimmy's .kext pack. This worked for me. Hopefully slice will make a new edited IOUSBFamily.kext driver for MAC OS X 10.5.8. Because the sleep function is not working anymore. Atm im roling back to 10.5.7. Greetings, Wally Link to comment Share on other sites More sharing options...
jolibabe Posted August 9, 2009 Share Posted August 9, 2009 thx for the awser, but how can i remove the driver if i can boot in Mac OS? Link to comment Share on other sites More sharing options...
Jimmy Mallmann Posted August 10, 2009 Author Share Posted August 10, 2009 So you can´t boot then! Well, insert your Boot123 cd, then load the instalation DVD After the instalation is loaded, select utilities, terminal then go to the volume mac is installed cd /Volumes/YourVolumeName cd System/Library/Extensions/ rm -rf Unwanted.kext Reboot, install the correct kexts and your are done .. The new .pkg fixes that. ... Link to comment Share on other sites More sharing options...
jolibabe Posted August 10, 2009 Share Posted August 10, 2009 Hi, thanks again It seems that the problem is not in that driver, i will delete all drivers from that pkg. Can you give me the names of the kext included in that pkg? Link to comment Share on other sites More sharing options...
A Posted August 10, 2009 Share Posted August 10, 2009 slight Off-topic Display = Apple LED Cinema Display (24" flat panel) (ok) Jimmy I just saw that you are running this Apple 24" cinema display - Is it working fine for you ? I decided not to buy it after I saw this http://www.insanelymac.com/forum/index.php?showtopic=158852 Would be really great to here from you . I would love to have this one my Hack. < I could also PM you about this- On topic- My mouse lags are gone since I reinstalled a Disabler Kext (which disables AppleUpstreamUserClient.kext ) Thanks for pointing me in the right direction ViniciusMaran. Happy upgrading! and Thank YOU Jimmy, for the support! Link to comment Share on other sites More sharing options...
A Posted August 10, 2009 Share Posted August 10, 2009 damn spoke to soon: System extension cannot be used The system extension "/System/Library/Extensions/IOATAFamily.kext/Contents/PlugIns/ AppleGenericPCATA.kext"was installed improperly and cannot be used. Please try reinstalling it, or contact the product´s vendor for an update. ( I am also getting this message for Attansic) Is what I get at startup - I first installed the 10.5.8 and then the 10.5.8 P5K Family Package. Seems like the installer did not work properly- aside of this message it works fine. The new Voodoo HDA is indeed crackle free ... nice Link to comment Share on other sites More sharing options...
Wallymc Posted August 10, 2009 Share Posted August 10, 2009 damn spoke to soon: System extension cannot be used The system extension "/System/Library/Extensions/IOATAFamily.kext/Contents/PlugIns/ AppleGenericPCATA.kext"was installed improperly and cannot be used. Please try reinstalling it, or contact the product�s vendor for an update. ( I am also getting this message for Attansic) Is what I get at startup - I first installed the 10.5.8 and then the 10.5.8 P5K Family Package. Seems like the installer did not work properly- aside of this message it works fine. The new Voodoo HDA is indeed crackle free ... nice Hi, I get the same with 'Attansic' The operating system cant load the .kext. etc etc. Greetings, Wally Link to comment Share on other sites More sharing options...
surrealillusion Posted August 11, 2009 Share Posted August 11, 2009 Followed the guide but now neither of the ethernet controllers are working after running the p5k package. It was all working with the 10.5.6 install and the patching 10.5.8. Something in the package breaks ethernet for both the realtek and marvell yukon chips. I'm running a P5K Deluxe Wifi board. Link to comment Share on other sites More sharing options...
@ddi Posted August 11, 2009 Share Posted August 11, 2009 Here too talked too early got this: and the same thing for AppleVIAATA what should be done? Same p5k-e Wifi should put this in the signature (I m lazy) Link to comment Share on other sites More sharing options...
A Posted August 11, 2009 Share Posted August 11, 2009 Here too talked too early got this: and the same thing for AppleVIAATA what should be done? Same p5k-e Wifi should put this in the signature (I m lazy) same here. So I guess the 10.5.8 package is not working correctly. Link to comment Share on other sites More sharing options...
Jimmy Mallmann Posted August 12, 2009 Author Share Posted August 12, 2009 For everyone having problems with kexts, fix the permitions with chown -R root:wheel /System/Library/Extensions chmod -R 755 /System/Library/Extensions That should do the trick... FIXED THE INSTALLER, GET IT HERE (LINK) VERSION 0.2 (hope the last fix, please test in a p5k-xx mobo ) It looks like the installer didn´t keep the permissions setting inputed before the build, so I got the .kexts from the extensions folder to make sure they were correct. IN ORDER TO GET THINGS RIGHT, YOU´D BETTER REINSTALL THE 10.5.8 UPDATE, THEN RUN THE INSTALLER AGAIN, THAT SHOULD CLEAN THINGS UP... THAT IS A TIP! Link to comment Share on other sites More sharing options...
Jimmy Mallmann Posted August 12, 2009 Author Share Posted August 12, 2009 The 10.5.8 update did that, you should get the yukon.kext or yukon2.kext than it will work again here you go the ( link ) Use universal installler to install that, and leave the Vanilla IONetworking if you wish to! Followed the guide but now neither of the ethernet controllers are working after running the p5k package. It was all working with the 10.5.6 install and the patching 10.5.8. Something in the package breaks ethernet for both the realtek and marvell yukon chips. I'm running a P5K Deluxe Wifi board. Hi, the 10.5.8 update eliminates that issue, at last.. well, about the display... You´ll need the adapter to make it work. I am very, very satisfied with this Apple 24" display, as it was a gift! I´m not sure I´d pay more than 400 bucks in a hardware I´d get cheaper! ... Link to comment Share on other sites More sharing options...
artic Posted August 12, 2009 Share Posted August 12, 2009 For everyone having problems with kexts, fix the permitions with chown -R root:wheel /System/Library/Extensions chmod -R 755 /System/Library/Extensions That should do the trick... FIXED THE INSTALLER, GET IT HERE (LINK) VERSION 0.2 (hope the last fix, please test in a p5k-xx mobo ) It looks like the installer didn´t keep the permissions setting inputed before the build, so I got the .kexts from the extensions folder to make sure they were correct. IN ORDER TO GET THINGS RIGHT, YOU´D BETTER REINSTALL THE 10.5.8 UPDATE, THEN RUN THE INSTALLER AGAIN, THAT SHOULD CLEAN THINGS UP... THAT IS A TIP! My boot times are very long, you turn the light of the floppy. Then when part is easy. It 'time to bootstrao which is very long. MotherBoard = ASUS P5K-SE NIC (Onboard) = Attansic L1 Ethernet keyboard = pc 105 mouse = usb Processor = Intel Core 2 Quad Q6600 @ 2.4 GHZ floppy = 1.44 Memory = 4x Corsair Dominator DDR2 1066 MHZ 1024 MB Graphics = Geforce 8600GTX 512 MB Display = 20" Asus 1680x1050 Hard Disk = 3X SAMSUNG SATA II 500 GB 32MB Cache (ok) DVD+RW = SATA LG Link to comment Share on other sites More sharing options...
Jimmy Mallmann Posted August 12, 2009 Author Share Posted August 12, 2009 Floppys don't work in mac... deactivate them in the bios... remove all the kexts you have installed before (specially LegacyHDAPlatform... and any other Legacys you may have installed), then apply the pack, post the results. My boot times are very long, you turn the light of the floppy. Then when part is easy. It 'time to bootstrao which is very long. MotherBoard = ASUS P5K-SE NIC (Onboard) = Attansic L1 Ethernet keyboard = pc 105 mouse = usb Processor = Intel Core 2 Quad Q6600 @ 2.4 GHZ floppy = 1.44 Memory = 4x Corsair Dominator DDR2 1066 MHZ 1024 MB Graphics = Geforce 8600GTX 512 MB Display = 20" Asus 1680x1050 Hard Disk = 3X SAMSUNG SATA II 500 GB 32MB Cache (ok) DVD+RW = SATA LG Link to comment Share on other sites More sharing options...
artic Posted August 12, 2009 Share Posted August 12, 2009 Floppys don't work in mac... deactivate them in the bios... remove all the kexts you have installed before (specially LegacyHDAPlatform... and any other Legacys you may have installed), then apply the pack, post the results. Your answer has arrived late. I reinstalled macosx10.8, then I installed p5k_family_10.5.8, then I installed appleyukon.kext ; now go immediately to crash. Link to comment Share on other sites More sharing options...
IGonza Posted August 12, 2009 Share Posted August 12, 2009 Hi, my microphone still doesn't work even with new VoodooHDA.kext. I've attached a screen with line in settings. If I test microphone in skype I just hear a hissing. had anyone the same problem? Igor. Link to comment Share on other sites More sharing options...
Recommended Posts