dj_myk Posted December 16, 2007 Share Posted December 16, 2007 Hi all I have recently done a fresh install of leopard 10.5 on my pc my spec are as follows Intel Dual Core 1.86 GHZ 2 Gig Ram Sound Blaster LIve 24 Bit EXternal USB ATI RADEON HD 2600PRO on PCI-E I am running it all in a Shuttle Barebones System I actually have leopard working using the onboard VGA card but I don't like it compared to DVI. when i boot up leopard with the ATI card enabled in the bios it gets past the grey boot loader screen with the flashing lines then the screen goes all pixilated and then sits there. Any ideas how I can get it working. Cheers Mike Link to comment Share on other sites More sharing options...
snikx Posted December 16, 2007 Share Posted December 16, 2007 I have basically the same config and my ATI radeon 2600pro is working perfectly. I use radeon drivers from irc.osx86.hu channel #radeonhd. However, I use the DVI to VGA adapter and my screen is connected with a vga cable. I don't believe DVI is working right now with 2600 pro. Link to comment Share on other sites More sharing options...
firstcolle Posted December 16, 2007 Share Posted December 16, 2007 Try THIS Link to comment Share on other sites More sharing options...
dj_myk Posted December 16, 2007 Author Share Posted December 16, 2007 wow that driver worked Now I don't mean to be a right {censored} but is there anyway I can now increase my resolution to above 1024*768. and if possible get a dual split monitor between my two dvi tft's if not the increase in res would be much handier Mike Link to comment Share on other sites More sharing options...
peruzza Posted December 16, 2007 Share Posted December 16, 2007 Try THIS I'm new here, so: how to apply this drivers? THX in advance!!! Link to comment Share on other sites More sharing options...
firstcolle Posted December 16, 2007 Share Posted December 16, 2007 i don't know.... i can't try anythigs cuz i don't have the hardware until now... i only read for understand what i have to do when i have the hardware.... and when i can i help you.... Link to comment Share on other sites More sharing options...
dj_myk Posted December 19, 2007 Author Share Posted December 19, 2007 I'm new here, so:how to apply this drivers? THX in advance!!! basically I downloaded the driver and then ran the package on my mac. Wolla Done a restart and it all worked aprat from I can't change the resolution above 1024*768. I am still trying to look for a fix for this of anyone can shed any light it would be great] Mike Link to comment Share on other sites More sharing options...
_quark_ Posted December 19, 2007 Share Posted December 19, 2007 I'm looking for EFI solution... for 2600pro Link to comment Share on other sites More sharing options...
vrs Posted December 22, 2007 Share Posted December 22, 2007 Greetings. At me such problem: at me hd2600pro dev id (9589), 512MB RAM pci-e and after installation of drivers from irc.osx86.hu channel *radeonhd my screen becomes such http://img252.imageshack.us/img252//8220/11ne7.jpg and the system hangs. Costs Leo 10.5.1 (original) with pc efi v8. Somebody knows as to solve such problem. I Russian - Excuse for my English. Link to comment Share on other sites More sharing options...
impreswrx Posted February 4, 2008 Share Posted February 4, 2008 I have pretty much tried all the kexts/fixes out there and I put together the kexts that work (CI, QE, and DVI!!) into a zip, which you can easily install with KextHelper. I will post the zip when I get home tonight. I am not sure if different manufacturers use the same devID for the HD2600PRO or not, so you might have to add your DevID to the info.plist of ATIRADEAONX2000.kext Link to comment Share on other sites More sharing options...
Renderer Posted February 24, 2008 Share Posted February 24, 2008 Wow Thank you so much! It work. Link to comment Share on other sites More sharing options...
uwannabananababy Posted February 24, 2008 Share Posted February 24, 2008 Try THIS awesome Link to comment Share on other sites More sharing options...
netkas Posted February 24, 2008 Share Posted February 24, 2008 damn noobs, give links to old files, go to netkas.org and grab latest natit/etc Link to comment Share on other sites More sharing options...
lastExile Posted February 24, 2008 Share Posted February 24, 2008 rofl Link to comment Share on other sites More sharing options...
uwannabananababy Posted March 6, 2008 Share Posted March 6, 2008 BUT IT WORKED FOR ME DL, INSTALL (IN SAFE MODE)(-x), REBOOT. PRETTY SIMPLE IF I MIGHT SAY. Link to comment Share on other sites More sharing options...
dragossh Posted March 6, 2008 Share Posted March 6, 2008 That package worked for me too. But I get white menus . And if I install the white menu fix from netkas, the screen becomes garbled at boot. Does anybody know how to fix this? Link to comment Share on other sites More sharing options...
linhnd2000 Posted April 4, 2008 Share Posted April 4, 2008 Hi all, I followed all the above instruction but after rebooting, the white screen with the apple logo appears (distorted res) and then the screen turns blue (a very nice and smooth blue though). All I can see is a mouse which i can control and it appears to be in the correct resolution (1650x1080). And also I think that OSX is running behind that blue screen 'cuz I notice when i moved the mouse to the corner that I set up to display all windows, the mouse changed into a hand with a finger pointing. Any advice, guys? Thanks Here's my system: Zephyroth Leopard 10.5.2 AMD EFI AMD X2 3800+ Asus A8N-VM CSM Visiontek HD 2600 Pro 512mb (dev id:9589) HDD: Maxtor 200GB IDE (MBR partitioned) audio: Soundmax (got it working with azalia package installer) Lan: Nforce ethernet (not working, tried forcedeth and skge) Link to comment Share on other sites More sharing options...
Recommended Posts