auqs10 Posted November 11, 2007 Share Posted November 11, 2007 Hi DiaboliK and Natit, your solution for the X1300 Pro (PCI-e 256 Mb) card (mine is Sapphire) is working fine under new released cat (Leo modified by BrazilianMac). I was surprised when installing the last package from your site (http://diabolik1605.com/DHF/Vault/NatitX1300.r1v1.Installer.zip) it gave me an error at the end and said something about (postflight error ...), but restarting the system everything came active and I am posting a capture of my screen to prove it. QE, CI actually work and resolution changes can be made. Great job and many thanks to you and to Natit. The same post is on Diabolik's forum, but I wanted to report this solution in a new topic for a quicker search. Link to comment Share on other sites More sharing options...
webmaris Posted November 12, 2007 Share Posted November 12, 2007 Hi guys! I have installed Leopard.. and driver for x1300.. Everything works fine, except rotation. My pc: dell dimension 9200(xps410) Also, I have no sound Thanks in advance for your help. Link to comment Share on other sites More sharing options...
Jesus05uk Posted November 18, 2007 Share Posted November 18, 2007 I've just used this on my x1300. Works perfectly under analogue, but when using my digital connection the screen acts as if there is no signal. Either way I'm more than happy. Link to comment Share on other sites More sharing options...
unknownserv Posted December 3, 2007 Share Posted December 3, 2007 Does it work with a laptop screen? Link to comment Share on other sites More sharing options...
ANtrah Posted December 5, 2007 Share Posted December 5, 2007 Yes works! Let me be operating normally when a blue screen show for 30 minutes until Work screen then I stop moving the mouse shows Desktop Is there a solution to the non-appearance of the blue screen?? Link to comment Share on other sites More sharing options...
douda Posted December 18, 2007 Share Posted December 18, 2007 my card x1300 128 mo (512 hyper memory) dont work with the diabolik installer, on boot my card is reconized but screen stay bloked and nothing to do ! i have installed the drivers, repair the permissions disk with disk utility and then i reboot ? i have maked all i must do ? is there a better way you can indicate to me ? a tuto or anything work thanks bye ! Link to comment Share on other sites More sharing options...
metalmaniac Posted December 22, 2007 Share Posted December 22, 2007 My ati x1300 512 mb seems not to work either... could it be no support for 512 mb cards Link to comment Share on other sites More sharing options...
grOOvepack Posted January 1, 2008 Share Posted January 1, 2008 Hi, my x1550, recognized as x1300pro (devid: 7142) works perfekt with this installer. Full recognition of 512MB RAM and DVI-Output. All OpenGL-Tests with "OpenGL Extension Viewer" passed and i have no artifacts. The only missing is support for dual-screen (extended Desktop) :-( - - - - - - Radeon X1300Pro Series: Chipset Model: Radeon X1300Pro Series Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x7142 Revision ID: 0x0000 Displays: HP L1955: Resolution: 1280 x 1024 @ 60 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Display Connector: Status: No display connected - - - - - - Link to comment Share on other sites More sharing options...
Powernet Posted January 16, 2008 Share Posted January 16, 2008 X1300pro dev ID 1002 7183 no CI no QE kext loaded: ATY_Caretta missing something ? i've try to add my id to ATIRadeonX1000.kext but system crash on startup Thanks! Link to comment Share on other sites More sharing options...
NUCLEaR Posted March 15, 2008 Share Posted March 15, 2008 X1300pro dev ID 1002 7183 no CI no QE kext loaded: ATY_Caretta missing something ? i've try to add my id to ATIRadeonX1000.kext but system crash on startup Thanks! This DevID doesn't work. I have the same problem. I will flash my card and see what happens. Link to comment Share on other sites More sharing options...
leonardoprc Posted September 22, 2008 Share Posted September 22, 2008 I installed the Kext NatitX1300.r1v1.Installer for my video card ATI-Radeon X1550 512MB GDDR2 128-bit, but still without QE. - My old monitor could be impossible this resource (QE)? Radeon X1300 PRO Series: Chipset Model: Radeon X1300 PRO Series Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x7143 Revision ID: 0x0000 Displays: StudioWorks 560a: Resolution: 1024 x 768 @ 60 Hz Depth: 32-bit Color Core Image: Software Main display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Compatible Connector Monitor: State: No monitor connected - It would be a matter of old monitor, or really my video card is not yet supported? Link to comment Share on other sites More sharing options...
Re1m0 Posted October 17, 2008 Share Posted October 17, 2008 I have X1300 and Dibene 10.5.5. i tried the natit installer and picked the second only because both gave me the script... error.... And gives the blue screen. Actually it f flickers a blue screen then goes to power sving mode(the monitor) when running -v then it says family .... failshow can i get my card to work on leopard:'( Link to comment Share on other sites More sharing options...
valeyfher Posted October 29, 2008 Share Posted October 29, 2008 i got the same problem with the blue screen, its looks like i have a full resolution but i only can see the pointer in the screen, my Ati X1300 256mb only has DVI, so what can i do ? Sorry for my english im from El Salvador .. Link to comment Share on other sites More sharing options...
elvip Posted December 26, 2008 Share Posted December 26, 2008 GOT IT TO WORK THANKS ALOT! Link to comment Share on other sites More sharing options...
sanssome Posted December 26, 2008 Share Posted December 26, 2008 Works great for me under 10.5.5 in my Dell Optiplex 745 with ATI X1300. Attempting to instal the 10.4.9 kexts fails in the installer, but it wasn't clear these are still required under leopard. Only problem I have is with sleep. If the display sleeps it never comes back. So I can't use the system sleep function which I finally got working on my 745 by going to 10.5.5. Oh well..I may just look for one of the most optimally supported nVidia PCI-E card. I would prefer to use the ATI x1300 though if somone knows how to fix this, because the ATI looks great, QE/CI is supported, and all resolutions are selectable. Link to comment Share on other sites More sharing options...
Recommended Posts