Jump to content

[Guide] ATI x1x00 Video Cards on Leopard; QE/CI Enabled


  • Please log in to reply
151 replies to this topic

#141
melm25

melm25

    InsanelyMac Protégé

  • Members
  • Pip
  • 16 posts
QUOTE(dashaund @ Jan 4 2008, 11:11 PM) Posted ImageOkay guys. After a long, hard fought three week battle (yeah...three weeks) of getting this to work, I can finally report success. I have an ATI X1650 Pro 512MB PCIe. First off, I installed ATIInject.kext and changed the Device ID to 0x71C1. Then, I modified ATIRadeonX1000.kext with 0XED the way MacMan2007 says too. What kept getting me was I would get the full resolution (1440x900) but no QE/CI. When I added my Device ID to info.plist under "IOPCIMatch", I kept getting kernel panics. So, then I started over and instead of adding my Device ID, I modified "0x71C01002" to "0x71C11002" and bingo...works perfect. Wish I had DVI though...but, hey, analog still looks super...better than XP does with the proper drivers and DVI! Any questions just reply or send a PM. Just thought I'd give back a little bit since you guys are freakin' awesome...I've been doing all kinds of crazy stuff with computers for years and I have to say, hands down, this is the best support forum I've ever experienced. I love being apart of this community! Thank you so much!


Hi!

Can you be more especific with this guide, because I have the same video card as you, and I have like a month to try to works but I cant do it.

Thanks

#142
blackmambo787

blackmambo787

    InsanelyMac Protégé

  • Members
  • Pip
  • 18 posts
Guys i have an ATI x2300, I did what MacMan2007 suggested but in the last passage when i write in the terminal i get this answer:
Last login: Tue Jan 6 13:36:01 on console
federico-s-mac-pro:~ Fede$ sudo -s
Password:
bash-3.2# chmod -R 755 //After 755 hit the spacebar, drag and drop ATIinject.kext from Extensions folder into terminal
chmod: //After: No such file or directory
chmod: 755: No such file or directory
chmod: hit: No such file or directory
chmod: the: No such file or directory
chmod: spacebar,: No such file or directory
chmod: drag: No such file or directory
chmod: and: No such file or directory
chmod: drop: No such file or directory
chmod: ATIinject.kext: No such file or directory
chmod: from: No such file or directory
chmod: Extensions: No such file or directory
chmod: folder: No such file or directory
chmod: into: No such file or directory
chmod: terminal: No such file or directory
bash-3.2#

someone can help me please?

#143
mrigank

mrigank

    InsanelyMac Protégé

  • Members
  • Pip
  • 17 posts

Guys i have an ATI x2300, I did what MacMan2007 suggested but in the last passage when i write in the terminal i get this answer:
Last login: Tue Jan 6 13:36:01 on console
federico-s-mac-pro:~ Fede$ sudo -s
Password:
bash-3.2# chmod -R 755 //After 755 hit the spacebar, drag and drop ATIinject.kext from Extensions folder into terminal
chmod: //After: No such file or directory
chmod: 755: No such file or directory
chmod: hit: No such file or directory
chmod: the: No such file or directory
chmod: spacebar,: No such file or directory
chmod: drag: No such file or directory
chmod: and: No such file or directory
chmod: drop: No such file or directory
chmod: ATIinject.kext: No such file or directory
chmod: from: No such file or directory
chmod: Extensions: No such file or directory
chmod: folder: No such file or directory
chmod: into: No such file or directory
chmod: terminal: No such file or directory
bash-3.2#

someone can help me please?

those r the instruction...dont type them with ur command...u have to give a space,and then have to drag file into terminal and press enter

#144
S@lwos

S@lwos

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 285 posts

1. After the package has been installed, delete ATIinject.kext from System/Library/Extensions/


Hello!
The link for downloading the file ATIinject.kext does not work.
You can restore it?

#145
lamchiheng

lamchiheng

    InsanelyMac Protégé

  • Members
  • Pip
  • 5 posts
  • Location:Redondo Beach
This method WORKS for me. QE/CI enabled with changeable resolutions, THX a lot
My card:
Ati x1300 Pro 256MB (Recognized as just x1300 series)
device id 0x7183
vender id 1002

My specs:
Dell XPS 410 Build
Intel ICH8 P965 Express Chipset
Intel Core 2 Duo 2.13 Ghz E6400
3GB 800 Mhz DDR2
320GB 7200 RPM SATA HD (65GB Allocated to Leopard)
iPC 10.5.6 release updated to 10.5.7 via software update (netkas method)

ATI Radeon X1300 Series:

Chipset Model: ATI Radeon X1300 Series
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x7183
Revision ID: 0x0000
EFI Driver Version: 01.00.068

Displays:
DELL SE198WFP:
Resolution: 1440 x 900 @ 60 Hz
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported

Display Connector:
Status: No Display Connected

#146
Nividica

Nividica

    InsanelyMac Protégé

  • Members
  • Pip
  • 20 posts
Yes! This guide was the beginning to fixing my QE/CI.
Using the guide, and some help of others, i have QE/CI working on my
AtiX1550 PCI, ID:0x7183
You can read the full topic here:Topic 174813

#147
rebel6

rebel6

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 2 posts
did this work also on Snow Leopard?

#148
taoroot

taoroot

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 1 posts
I have x1550 7178 and on Snow Leopard is working only QE/CI, but no resolution and no DVI port. Only VGA port is working. Anybody know how to solve it?;)

#149
the5th

the5th

    InsanelyMac Protégé

  • Members
  • Pip
  • 15 posts

This method WORKS for me. QE/CI enabled with changeable resolutions, THX a lot
My card:
Ati x1300 Pro 256MB (Recognized as just x1300 series)
device id 0x7183
vender id 1002

My specs:
Dell XPS 410 Build
Intel ICH8 P965 Express Chipset
Intel Core 2 Duo 2.13 Ghz E6400
3GB 800 Mhz DDR2
320GB 7200 RPM SATA HD (65GB Allocated to Leopard)
iPC 10.5.6 release updated to 10.5.7 via software update (netkas method)

ATI Radeon X1300 Series:

Chipset Model: ATI Radeon X1300 Series
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x7183
Revision ID: 0x0000
EFI Driver Version: 01.00.068

Displays:
DELL SE198WFP:
Resolution: 1440 x 900 @ 60 Hz
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported

Display Connector:
Status: No Display Connected



hello there do u have this working off of dvi or vga?
i have it working but with a dvi to vga adapter.
screen just flickers blue then blacks out with no signal w/ dvi connected directly.
thanks for the help in advanced.

#150
sir_dave

sir_dave

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts
hi ppl, first post.. well after many tries and blue/black screens , i found this method, i followed step by step carefully, then reboot and voila, i got a pretty good resolution but seconds later i am having kernel panic! :) , i dont know what im doing wrong but i think it is that when i edit the kext in hex-editor, the replaced values are 2 first (method says should? be 3???) and then hex-editor makes 5 instead of 6 mentioned, i have a doubt in this part, my id is 0xF1ce, but when i replace the value, which one do i have to replace?, in the example the second one value is the replaced one 0x71c31002, in my case i just replace the second value of all founded, and then i use that value for search and replace in hex editor, is this right??? how do i know what is the ID value that leopard system is using, which i guess is the one that i have to replace in my own kexts? i read somewhere that you need to replace in the code wormy string for caretta i tried this too but i get blue screen... tnx for the support these is my old box.. tnx so much

Mobo: GA EX58 UDR3
Ram: 4 GB DDR3
HDD: 80 GB IDE 7200
DVDRW: SATA Sony
Processor: Intel i7 950
SO: iATKOS V7 bootloader cham 2, Voodoo 9.0.7,
Graphics: X1300XT PCIe 512 MB DDR2 (0xF1ce)



CODE</P> <P><key>IOPCIMatch</key>
<string>0x71871002 [b]0x71c31002[/b] 0x72101002 0x71DE1002 0x71461002 0x71421002 0x71091002 0x71C51002 0x72401002 0x72491002 0x72911002</string></P> <DIV class=codemain>


#151
sir_dave

sir_dave

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts
ok i repeat all the method replacing the value given :D 71c0, and worked!!! but i can not change resolution is this "normal"? QE/CI enabled!!! :) tnx great method btw

#152
sir_dave

sir_dave

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts
finally!!!, i repeated all method again for the card x1300xt PCIe 512 MB id 0xF1ce but WITHOUT replacing MY VALUE (0xF1ce) but using the same value ID in the method (F1c3) and now i can change resolution, but no CI/QE enabled yet... tnx so much!!! :lol:





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy