ManelScout4Life Posted October 27, 2007 Share Posted October 27, 2007 the Patched DVD and Files to install Leopard 9a581 GM on your Intel SSE3 System is already released and a certian DEMON has it... brazilMac has release here are the intructions that come with it This is the Patched DVD and Files to install Leopard 9a581 GM on your Intel SSE3 System. Thanks!!! ----------------------------------------------------------------------- GUIDE - HOW TO INSTALL LEOPARD PATCHED DVD WITHOUT TIGER INSTALLED THIS GUIDE IS FOR A BLANK DRIVE WITH NO INSTALLATION OF TIGER IN IT!!! This simple guide will show you how to install leopard on your PC without having Tiger on your system. Just follow the simple steps. What you need: -The Patched DVD Image -The zip file -One pen drive or USB Flash Drive formatted as FAT32 STEP 1: Burn the image to a Single Layer DVD; Format your Thumb Drive!!! This should be FAT32!!!!! IT needs to be readable by the terminal when we access it; Also, the drive label should be "Patcher". This is very IMPORTANT, since the latter will spit out an error!! When you format, make sure it is named Patcher! No CAPS! Now, unzip the archive to your thumb drive. It should contain now one folder named "files"; INSTALLING LEOPARD Now lets install Leopard. Insert the DVD on your computer and make sure you boot from the DVD. Usually thats done if you press F12 or whatever key combination to give you the option to choose what disk/cd drive you want to boot from. Select your CD/DVD drive; After the installer has loaded (it will take a while, be patient) select your language and make sure you hit CUSTOMIZE. Unselect all packages there!!! Leopard will now install. It may take 15 minutes or so and it will be all done. Reboot. Make sure that your USB/Pen Drive is connected to your pc!! After the reboot, also make sure you do the same step above: Press whatever key combination to give you the option to choose your boot device: Now Select your CD/DVD drive. When the Darwin bootloader shows up, Hit F8; When you see the prompt, type -s and hit enter. The DVD will now load in verbose mode. Watch for any panics! It should load without a problem (of course, if you already installed, its all good!) Once the setup is loaded, select your language. When the welcome screens shows up, select UTILITIES-TERMINAL. The terminal will now open. We will now browse to our Thumb Drive; In the command line, type: (Make sure there are spaces between cd and the 2 dots) cd .. cd .. cd Volumes cd Patcher cd files Lets now run the script. This will patch the installation so it will boot properly: ./9a581PostPatch.sh Let it run. You can answer yes when removing the ACPUPowerManagement kext After the script is done, reboot. You will now be able to Boot Leopard!!! If you dont see it in the bootloader, consult osx86scene.com . http://forum.osx86scene.com/viewtopic.php?...p;sk=t&sd=a THIS GUIDE IS FOR A BLANK DRIVE WITH NO INSTALLATION OF TIGER IN IT!!! If you already have the patched image and tiger, you may work as well. Link to comment Share on other sites More sharing options...
A-dre Posted October 27, 2007 Share Posted October 27, 2007 It will be a good news to hear about normaly working geforce 8xxx series ( I have GF 8400 GS ) in addition to amd support by Leo. Link to comment Share on other sites More sharing options...
CyCLoBoT Posted October 27, 2007 Share Posted October 27, 2007 I hope release for AMD is followed shortly. Link to comment Share on other sites More sharing options...
roflcopterguy Posted October 27, 2007 Share Posted October 27, 2007 forget AMD what about SSE2? Link to comment Share on other sites More sharing options...
JedixJarf Posted October 27, 2007 Share Posted October 27, 2007 Woo. Leopard running great on my Bad Axe 2. No sound in still... Link to comment Share on other sites More sharing options...
Fabiano Arruda Posted October 27, 2007 Share Posted October 27, 2007 Can I intall it on a drive with Vista already installed? if yes, how? Link to comment Share on other sites More sharing options...
jl8080 Posted October 27, 2007 Share Posted October 27, 2007 Can I intall it on a drive with Vista already installed? if yes, how? Yes. Check the OSX86 Installation forum. Do a forum search (search for dual boot or chain0). Check the wiki. Link to comment Share on other sites More sharing options...
Fabiano Arruda Posted October 27, 2007 Share Posted October 27, 2007 Yes. Check the OSX86 Installation forum. Do a forum search (search for dual boot or chain0). Check the wiki. Already checked these. Just want to be sure that this release could work the same way as well, since all these tutorials and wikis is dealing with Tiger thanks Link to comment Share on other sites More sharing options...
failurbydesign Posted October 27, 2007 Share Posted October 27, 2007 forget AMD what about SSE2? Um get something that supports sse3... Link to comment Share on other sites More sharing options...
onizuka Posted October 27, 2007 Share Posted October 27, 2007 That is the slowest torrent ever, still only one third available after 8 hours... Can't wait to install Leopard Link to comment Share on other sites More sharing options...
fazekaim Posted October 27, 2007 Share Posted October 27, 2007 Has got anybody some info about drivers for Leopard? (videocard, soundcard, motherboard peripherals) Link to comment Share on other sites More sharing options...
shoarthing Posted October 27, 2007 Share Posted October 27, 2007 Yeah, I think I'm just gonna go buy it and try patch it myself. I still don't know how I'm gonna install drivers for it... I'm waiting for 10.5 Uphuck! well, yes, that is a nice surprise . . . . sounds as if the Uphuck crew expect to have things sorted by the end of this month. Link to comment Share on other sites More sharing options...
Chicken! Posted October 27, 2007 Share Posted October 27, 2007 yes but... in AMD version ? Link to comment Share on other sites More sharing options...
maksel Posted October 27, 2007 Share Posted October 27, 2007 i can't see an amd version, i guess it's not out yet. the intel (sse3) is out there. Link to comment Share on other sites More sharing options...
homers Posted October 27, 2007 Share Posted October 27, 2007 What do I type in for the INtel version in the search? Link to comment Share on other sites More sharing options...
ratmandu Posted October 27, 2007 Share Posted October 27, 2007 For the intel version, this is what the torrent is called on the demon Leopard GM 9a581 Patched for Intel PCs (SSE3 ONLY) and Patch Link to comment Share on other sites More sharing options...
onizuka Posted October 27, 2007 Share Posted October 27, 2007 What do I type in for the INtel version in the search? just search leopard, and click "Leopard GM 9a581 Patched for Intel PCs (SSE3 ONLY) and Patch" Link to comment Share on other sites More sharing options...
BrazilMAC Posted October 27, 2007 Share Posted October 27, 2007 FOr those that have 8800 cards, they fully work!!!! Link to comment Share on other sites More sharing options...
onizuka Posted October 27, 2007 Share Posted October 27, 2007 FOr those that have 8800 cards, they fully work!!!! you mean they fully work out of the box? even dual display?? Link to comment Share on other sites More sharing options...
starblob Posted October 27, 2007 Share Posted October 27, 2007 seems you can download it off demonoid without an invitiation Link to comment Share on other sites More sharing options...
FabricioGS Posted October 27, 2007 Share Posted October 27, 2007 you mean they fully work out of the box? even dual display?? Same question here It would be great, but I think he means with some kind of patch, like this one: http://forum.insanelymac.com/index.php?showtopic=65849 Link to comment Share on other sites More sharing options...
BrazilMAC Posted October 27, 2007 Share Posted October 27, 2007 If you have a 8800GTS: - You need nvinject, nvdaresman, geforce, nvdan50ha kexts Link to comment Share on other sites More sharing options...
GFOnyX Posted October 27, 2007 Share Posted October 27, 2007 BrazilMac are you planning to release a patch for AMD too? Link to comment Share on other sites More sharing options...
Omega01 Posted October 27, 2007 Share Posted October 27, 2007 I'm downloading Brazilmac from the green demon but I think this release has only English language inside.... I think that the french as well as the german language-pack are still included in Barazilmac's release. The patch script he wrote removes only the X11user.pkg and other languages such as dutch, danish etc.: echo Removing X11user and 6 languages files...rm -rf /Volumes/osx86dvd/System/Installation/Packages/X11user.pkg rm -rf /Volumes/osx86dvd/System/Installation/Packages/Dutch.pkg rm -rf /Volumes/osx86dvd/System/Installation/Packages/Danish.pkg rm -rf /Volumes/osx86dvd/System/Installation/Packages/Finnish.pkg rm -rf /Volumes/osx86dvd/System/Installation/Packages/Polish.pkg rm -rf /Volumes/osx86dvd/System/Installation/Packages/Russian.pkg rm -rf /Volumes/osx86dvd/System/Installation/Packages/Swedish.pkg Greetz, Daniel Link to comment Share on other sites More sharing options...
frmac Posted October 27, 2007 Share Posted October 27, 2007 I think that the french as well as the german language-pack are still included in Barazilmac's release. The patch script he wrote removes only the X11user.pkg and other languages such as dutch, danish etc.:Greetz, Daniel Thanks a lot Daniel. Link to comment Share on other sites More sharing options...
Recommended Posts