x986123 Posted August 7, 2007 Share Posted August 7, 2007 Ok i guess i just want to help those in need of a ATi X1300 Driver for X1300pro and X1300! Driver: http://diabolik1605.com/DHF/iATi.html Thanks Diabolik for the awsome drivers! Download driver X1xxx (xxx for the model eg. 1300..)/MOBILITY installer. Step 1: Install it! Step 2: Go to disk utility. Step 3: Do Repair Permissions at the bottom of the Disk Utlity screen. Step 4: Shut down your computer! (Shut Down not restart!) Step 5: Plug in your VGA CABLE! (NOT DVI! DVI DOESN'T WORK WITH IT!) Step 6: Start your computer, boot up, wait untill it loads to desktop. Step 7: Go to Display option in System Prefrences and change res. and refresh rate! THERE YOU GO! HOPE YOUR HAPPY! You should have no tearing/artifacts! If anyone wants to help me, Help me find driver for Turtle Beach Sound Card driver for osx86! Thanks yall! Link to comment Share on other sites More sharing options...
Rez. Posted August 7, 2007 Share Posted August 7, 2007 Same Ole' same ole'. Running an ATI Radeon X1300 Pro on VGA. Installed with the Natit X1300 Installer, Repaired Permissions and Shutdown. Upon boot I was greeted yet again with a monitor that goes into power saving mode just before the Desktop loads. Booted in -V mode and can't seem to find any errors while Natit is loading - The driver never worked for me. Thanks all for the effort though. Link to comment Share on other sites More sharing options...
cyclonefr Posted August 7, 2007 Share Posted August 7, 2007 no solution for regular X1600 PRO to use dual monitor? cause when i plug my tv screen image is blurry Link to comment Share on other sites More sharing options...
thor486 Posted August 7, 2007 Share Posted August 7, 2007 I have a mobility X1600, my card is working with alcinject driver. Everything works, also dual monitor, the only thing I noticed is that the 3d performance are very low. I tried to start UT2004 for OSX and it run very slow. Are these drivers better for 3d performance? I tried to install both mobilty installer and x1600 installer from Diabolik's site but they don't work. Are there some tweaks to do with mobility cards and diabolik drivers? Link to comment Share on other sites More sharing options...
adowoMAC Posted August 7, 2007 Share Posted August 7, 2007 Does it work for Mobility Radeon X1700? Hendrik Link to comment Share on other sites More sharing options...
x986123 Posted August 7, 2007 Author Share Posted August 7, 2007 look at the drivers page for your video card nvidia/gma/ATiand thor, there are no tweaks Link to comment Share on other sites More sharing options...
JIeBKA Posted August 19, 2007 Share Posted August 19, 2007 I tried to install Mobility.kext + ATIRadeonX1000.kext on my ACER 5112WLMi(video card is X1600 Mobility 128Mb) and others kext... But all that I see after install is APPLE logo or nothing happened What drivers should I install? Link to comment Share on other sites More sharing options...
Snerler Posted August 20, 2007 Share Posted August 20, 2007 I have X1800 suppoted with dual monitot and DVI. Link to comment Share on other sites More sharing options...
JIeBKA Posted August 24, 2007 Share Posted August 24, 2007 Hey, guys! I have ATI X1600 Mobility on my ACER 5112WLMi laptop. I tried to do all that you say... But I still have some problems: when I tried boot, on display I see only Apple logo and loading stops... My EDID is: 00FFFFFF FFFFFF00 06AF7421 00000000 010F0103 80211578 0A1CF597 58508E27 27505400 00000101 01010101 01010101 01010101 0101C71B 00A05020 17303020 36004BCF 10000018 0000000F 00000000 00000000 00000000 00200000 00FE0041 554F0A20 20202020 20202020 000000FE 00423135 34455730 32205631 200A00AA Can you send compiled kext with this EDID, please? You can attach it in this topic or in PM... It doesn't matter... Thanks! P.S.: Sorry for my bad English. Link to comment Share on other sites More sharing options...
tldr-mac-legend Posted January 3, 2008 Share Posted January 3, 2008 Does it work on ATI X1300 Mobility? I got Dell E1505. Parth Link to comment Share on other sites More sharing options...
tldr-mac-legend Posted January 8, 2008 Share Posted January 8, 2008 Anyone? Link to comment Share on other sites More sharing options...
menuhin Posted February 17, 2008 Share Posted February 17, 2008 Ok i guess i just want to help those in need of a ATi X1300 Driver for X1300pro and X1300! Driver: http://diabolik1605.com/DHF/iATi.html Thanks Diabolik for the awsome drivers! Does anyone know if Diabolik is going to relaunch his site some time later? Link to comment Share on other sites More sharing options...
aerotwelve Posted February 17, 2008 Share Posted February 17, 2008 I was hoping for an internal LCD X1400 fix, but I suppose this works too. Link to comment Share on other sites More sharing options...
j@k3 Posted February 19, 2008 Share Posted February 19, 2008 thx anywhere else toget those drivers, that link is dead .... EDIT: wanted to add that driver acctualy works, now i get resolution change, no artifacts, and finally the X11 works, yeah for some reason there was a connection between not having a good driver for the x1300 and X11 not working so now stuff like crossover is working thx x986123 Link to comment Share on other sites More sharing options...
Taisto Posted February 24, 2008 Share Posted February 24, 2008 Link dead, can anyone post it elsewhere ? Link to comment Share on other sites More sharing options...
sleepy_yellow Posted March 2, 2008 Share Posted March 2, 2008 ya can somebody upload the file again? link dead Link to comment Share on other sites More sharing options...
brent.arnold Posted March 14, 2008 Share Posted March 14, 2008 Dead Link!! Please repost. Link to comment Share on other sites More sharing options...
mtotho Posted March 14, 2008 Share Posted March 14, 2008 x1400? perhaps after dev id change? Link to comment Share on other sites More sharing options...
agua2004 Posted March 16, 2008 Share Posted March 16, 2008 I installed Iatkos 10.5.1 and selected 1600 from the customize setup screen and after the install it worked. just though i post here, so far no problems, only thing i cant dual display. Link to comment Share on other sites More sharing options...
jpsiemer Posted April 25, 2008 Share Posted April 25, 2008 anybody got a link to this file???? the old link is dead!!!! pls help, need this for a friend... thanks Link to comment Share on other sites More sharing options...
jpsiemer Posted April 29, 2008 Share Posted April 29, 2008 I found a mirror!!! Can anybody confirm that this Diabolik Natit x1300 r1v1 Installer works with the x1300 Mobility? http://files.filefront.com/NatitX1300r1v1I...;/fileinfo.html Link to comment Share on other sites More sharing options...
x986123 Posted May 1, 2008 Author Share Posted May 1, 2008 http://www.fileden.com/files/2007/5/11/107...1.Installer.zip This is the only one i have downloaded, for x1300, and only one i ever saved. Link to comment Share on other sites More sharing options...
cipz Posted November 25, 2008 Share Posted November 25, 2008 thanks.. will try soon.. Link to comment Share on other sites More sharing options...
hopkenss Posted March 6, 2009 Share Posted March 6, 2009 i m sorry,but i have acer aspire 5112 and my card ati x1600 mobility 71c5 couldn't work with resolution 1280x800 only 1024x768((( i do all in this theem,but no results(((somebody knows how to fix this problem?? thanks! Link to comment Share on other sites More sharing options...
BSpot Posted March 12, 2009 Share Posted March 12, 2009 Hello! Have anyone find a solution to "black/white-drop down menus" problem of ATI X1900 series? System profiler says "Quartz Extreme: Supported" and obliously there is some acceleration going on but all the DROP-DOWN MENUS ARE BLACK!? Any idea what might cause this? -D.Art Link to comment Share on other sites More sharing options...
Recommended Posts