Jump to content

Sigmatel 9271 (STAC9271) driver

LordSte

By LordSte,
in Archive

 Share
35 posts in this topic

Recommended Posts

  • 3 months later...
  • 2 months later...
ion
ion
Posted
Posted

I have Intel DG33TL motherboard and 9271D audio, but it doesn't work here neither.

I opened several 9271 dump files with HDA Patcher and the first one seemed good, the patcher notified with a successful message but after a restart there weren't any sound devices recognized.

Link to comment
Share on other sites
b:z
b:z
Posted
Posted
Yea, took me awhile to find how to do that. Thanks for the response. I'm uploading it incase someone else needs it. Worked like a charm by the way.

 

How can you do it with it? Please show me how to patch my leopard.

 

Thank you very much.

Link to comment
Share on other sites
  • 2 weeks later...
b:z
b:z
Posted
Posted
Any word on getting this to work? I have a Bad Axe mobo with Sigmatel 9271D, and cannot get it to work for the life of me. Tried with several different Targua patchers to no avail.

You should try HDAApple Sutution of Targua. I think it will help your sound enabled on your workstation.

My sound card 9271D work well.

 

:wacko:

Link to comment
Share on other sites
  • 3 weeks later...
MACinized
MACinized
Posted
Posted
You should try HDAApple Sutution of Targua. I think it will help your sound enabled on your workstation.

My sound card 9271D work well.

 

;)

how did u exactly do it? tried using AppleHDAPatcherv1.20 but w/ no success.

AppleHDAPatcher.png

pls. advise. tnx.

 

btw, especially for those who got it working already, the least u can do is spell his/her name right: it's TARUGA.

Link to comment
Share on other sites
MACinized
MACinized
Posted
Posted
MACinized, check here:

http://forum.insanelymac.com/index.php?sho...amp;hl=appleHDA

 

Download kext "STAC9271D_0x83847627_testing.zip" and load it on your system.

Reboot, then your sound should work.

 

:)

tnx for the advice b:z but will u also kindly help me out w/ the easiest & safest way of loading these kexts files: ALCinject & AppleHDA? just don't wanna mess up my system. tnx in advance.

Link to comment
Share on other sites
b:z
b:z
Posted
Posted
tnx for the advice b:z but will u also kindly help me out w/ the easiest & safest way of loading these kexts files: ALCinject & AppleHDA? just don't wanna mess up my system. tnx in advance.

 

First, download and unzip "STAC9271D_0x83847627_testing.zip" on your desktop. You will have "ALCinject.kext" and "AppleHDA.kext" on desktop.

Then, execute these command below:

$ sudo cp -R /User/yourusername/Desktop/ALCinject.kext /System/Library/Extensions/

$ sudo cp -R /User/yourusername/Desktop/AppleHDA.kext /System/Library/Extensions/

$sudo chown -R 0:0 /System/Library/Extensions/ALCinject.kext

$sudo chown -R 0:0 /System/Library/Extensions/AppleHDA.kext

$sudo chmod -R 755 /System/Library/Extensions/ALCinject.kext

$sudo chmod -R 755 /System/Library/Extensions/AppleHDA.kext

$sudo rm -Rf /System/Library/Extensions.*

 

ok, you can reboot your macos and enjoy sound.

 

:(

Link to comment
Share on other sites
MACinized
MACinized
Posted
Posted
First, download and unzip "STAC9271D_0x83847627_testing.zip" on your desktop. You will have "ALCinject.kext" and "AppleHDA.kext" on desktop.

Then, execute these command below:

...

ok, you can reboot your macos and enjoy sound.

 

:(

tnx a lot b:z! got my onboard audio working already but your guide should be

... /User/yourusername/Desktop/...
since i have the kexts in my desktop (as u instructed). :)

 

another thing, mic/audio line-in is not working so can't do audio/voice recording. hope there's also a fix for this. tnx again.

 

@iliuxa

 

already got it w/ b:z's guide but i'm still interested in making use of the kext helper included in kalyway's leopard 10.5.1. tried it but just didn't get it. will u kindly advise me on how to make use of it? tnx in advance.

Link to comment
Share on other sites
  • 4 weeks later...
  • 3 weeks later...
  • 4 months later...
  • 2 weeks later...
  • 3 weeks later...
Hirsa
Hirsa
Posted
Posted

:hysterical:

 

Hi guys

 

I have mobo Intel DP35DP, E6750 and OS X 10.5.2 with Vanilla 9.2 kernel

 

and use any patch STAC9271D_0x83847627_testing.zip and audio patch from rapid share

 

my os detect my sound (sigmatel 9271) but sound not coming out from my speakers

 

I test my sound in windows and it's work fine.

 

Please Help me what do I do...! :hysterical:

Link to comment
Share on other sites
MACinized
MACinized
Posted
Posted
<_<

 

Hi guys

 

I have mobo Intel DP35DP, E6750 and OS X 10.5.2 with Vanilla 9.2 kernel

 

and use any patch STAC9271D_0x83847627_testing.zip and audio patch from rapid share

 

my os detect my sound (sigmatel 9271) but sound not coming out from my speakers

 

I test my sound in windows and it's work fine.

 

Please Help me what do I do...! :wacko:

try the two kexts in post#18.

Link to comment
Share on other sites
  • 2 months later...
chappatti
chappatti
Posted
Posted
with Kext Helper b7, install these kexts (ALCinject & AppleHDA)

 

reboot & your onboard audio out should be working fine.

 

Macinized:

 

I can confirm this works!!!! Great tip and thanks!! x0x0

 

On Intel Dg965WH MB built in Sigmatel. ATI X1950 Pro. SATA drive.

 

I first used the STAC9271 dump from a few posts above and ran it thru AppleHDAPatcher. I got no sound. But when I used the kexts and loaded with osx86 tools (free utility...ask google) IT WORKS!!!!!!!!

 

BTW, loading the kexts BY THEMSELVES without the AppleHDA patcher thingy caused a freeze..go figure!!

Link to comment
Share on other sites
  • 1 month later...
cwestpha
cwestpha
Posted
Posted
Macinized:

 

I can confirm this works!!!! Great tip and thanks!! x0x0

 

On Intel Dg965WH MB built in Sigmatel. ATI X1950 Pro. SATA drive.

 

I first used the STAC9271 dump from a few posts above and ran it thru AppleHDAPatcher. I got no sound. But when I used the kexts and loaded with osx86 tools (free utility...ask google) IT WORKS!!!!!!!!

 

BTW, loading the kexts BY THEMSELVES without the AppleHDA patcher thingy caused a freeze..go figure!!

Do you still have a copy of the STAC9271D_0x83847627_testing.zip file with the corresponding patcher you used. Once again the wiki is down that contains it. x.x

The DG965WH is such a pain. x.x

 

Update: N/M I figured out what was going wrong. I disabled the built in audio, booted into OS X, shut down, then went back into BIOS and enabled it again. When OS X came back up 10.5.5 detected it for some reason. x.x

Link to comment
Share on other sites
MACinized
MACinized
Posted
Posted
Do you still have a copy of the STAC9271D_0x83847627_testing.zip file with the corresponding patcher you used. Once again the wiki is down that contains it. x.x

The DG965WH is such a pain. x.x

 

Update: N/M I figured out what was going wrong. I disabled the built in audio, booted into OS X, shut down, then went back into BIOS and enabled it again. When OS X came back up 10.5.5 detected it for some reason. x.x

this link provides better solution.

 

good luck.

Link to comment
Share on other sites
mallard1983
mallard1983
Posted
Posted

I have tried everything that has been posted here, and still not having any luck getting sound. I am using a HP HDX 9494NR. It has a sigmatel 9271 chipset for the sound, and the sound works great in Vista. I really want to get the sound working in OS X since it is the only item left broken since I started this dual boot project. When I go look at the system info inside of Mac OS X it shows in the Audio (Build In) area that I have an Intel High Definition Audio. The Device ID is Ox103C30D4, and the Audio ID shows 12. The available Devices shows nothing though. Any help would be greatly appreciated.

 

 

If I need to get any more information for someone to be able to help me fix this, just let me know and I will make it happen.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...