Posted 10 July 2007 - 10:29 PM
In Jas 10.4.8 my card works ok
Posted 14 July 2007 - 07:17 PM
Then when I restart OSX, It won't boot anymore T_T.
Posted 16 July 2007 - 11:18 AM
Before the update, my cpu is recognized as a 2.69 Ghz Intel Core 2 cpu, which is right because I OC' ed my 6600 c2d cpu. But after the 10.4.9 install, it is recognized as a 1,8 c2d cpu! And yes, the speed in Xbench is also a lot slower. Anymore with the same problem as mine?
If not, what am I doing wrong?
After reading some bits of this thread, I'm beginning to understand the problem, I think it is kernel related.
But I don't have a lot of kernel udating experience, so I am afraid to kill my blasting running 10.4.8 setup.
These are the specs of my system, is there a safe way to update this without programming?
Intel c2d 6600 @ 2,7ghz
Asrock Conroe 945DVI motherbord (only onboard network doensn't work, sound only output)
WD raptor 74gb hdd
Intel 10/100/1000 pci lan adapter
4 times 1gb memory
Posted 18 July 2007 - 05:21 PM
Posted 20 July 2007 - 12:49 PM
I have only to add Powermanagement.bundle that strangely didn't work on my laptop (Acer Travelmate 2420)
Posted 26 July 2007 - 04:01 AM
AMD 3800+ CPU
ASUS A8V-VM SE motherboard (VIA K8M890 Northbridge, VIA VT 8237a Southbridge, RealTek RTL8201 CL LAN and RealTek ALC660 chip)
2-512mb Kingston ValueRAM DDR400 sticks
Foxconn ATI x300 PCIe graphics card
Pioneer A0-4 DVD Drive
Maxtor 300gb IDE drive
I installed uphuck v1.3 with the AMD driver and Tubgir AMD Kernal that was available on the DVD. It installed and booted successfully, however, I do not have LAN or Audio. I'm not worried about the audio right now, as I have a Griffin iMic I can use temporarily. However, where do I find the RealTek 8201 driver? RealTek only has the PPC drivers for the PPC-based Macs.
Posted 27 July 2007 - 06:56 AM
However, I'm stuck at 1024x768 resolution with the FoxConn ATi X350 PCIe card. What driver do i need for this card, as there is none for mac os x?
Posted 28 July 2007 - 06:32 PM
it used to get recognized properly in 10.4.8, now 'about this mac' says '1.4 ghz intel core 2 duo', and the system clock goes nearly twice as fast as it should. animations are too fast, which i can live with, but the clock running at twice the pace is troublesome...
Posted 09 August 2007 - 07:38 AM
i also have the same problem
my coreduo is now reconized as an 1.5 ghz instead of 2.4 !!!
please someone help
Posted 10 August 2007 - 08:26 PM
I have an Overclocked Pentium D and as the clock is linked to the processor clock speed, I have an issue with OS 10.4.9.
In 10.4.8 the OS was not able to read my processos specs, so it just believed what my bios was telling it.
The result is that on version 10.4.9 the time goes 40% faster than it should (the clock is never right).
So 10.4.9 is a no go for me (at least until I figure a way to solve this)
anyone have an idea?
I've just installed 10.4.9 (with Jas 10.4.8 and then updating) and I'm having the same problem with the system clock running too fast. Has this problem been solved yet? Please help!!! Thanks so much.
Posted 13 August 2007 - 08:05 PM
Processor: Pentium 4 2,8 GHz Codename Northwood (SSE2)
Motherboard: Asus P4V8X-X (Doesn't works exceptionaly with some of USB hardware)
Integrated sound: AD 1980 (AC97) (Only left channel)
Integrated ethernet: VIA Rhine Fast Ethernet adapter (Any problems)
Graphics card: Nvidia GeForce Fx 5200 (Quarz Extreme and Core Image enabled with AGPGart.kext removed)
ATA/IDE Devices: Bus 1 (Ultra ATA) ST3120022A (HDD Seagate 120 Gb)
ST3250620A (HDD Seagate 250 Gb)
Bus 2 (IDE) TSSTcorpCD/DVDW SH-S162L (CD/DVD Writer)
SONY DVD-ROM DDU1612 (CD/DVD Reader)
(All working with writting features)
Keybard and mouse: Microsoft Wireless Optical Desktop 1.1 (System profiler says version 2.0)
Display: Philips 170S4 (17'' 1280x1024x32@75)
Posted 14 August 2007 - 10:39 PM
hi im trying to install a jas osx10.4.9 on my vista machine i ran through and got past the installation then i got to a grey screen that stated i needed to restart my machine, i keep restrting but it stays there. also my vista partition wont start and i had to use the repair function to restore my access to it. anyon ehave this problem. also how do i remove the sfdisk boot manager program from the machine?
If you installed OSX and Vista in separated HD dirves:
With Paragon partition manager, set as active the partition where you instaled mac (be sure that the Bios is set to boot from mac osx HD drive).
If you instaled OSX and vista in separated partitons of the same drive:
With Paragon partition manager, set as active the partition where you instaled mac and set as inactive Vista partition (you'll be able to boot from Vista pressing F8 before Darwin's startup).
Posted 27 August 2007 - 03:53 PM
so instead i backed up to an external drive, then installed uphuck 1.4a
then i did "import my files and settings from another drive" (or whatever it's called) during the setup. so all the work i had done installing and customizing things was carried over, it worked really well! i would recommend doing it this way.
Posted 30 August 2007 - 12:19 PM
Posted 30 August 2007 - 12:51 PM
Posted 06 September 2007 - 09:07 AM
to try and install OS 10.4.7 on my home PC. See Specs:
Asus P5K-E Board
Core 2 Duo E6750 Chip
(4) x 1gig Ram PC6400
Nvidia GeForce 6800 Video Card
1 x 500 sata (XP)
1 x 320 sata (xp back up)
1 x 120 IDE (Want to install OS X here)
1 x LG IDE DVD Drive
i have Jas 10.4.7 and go "Boot from DVD Drive"
a few seconds later it shows me:
"/com.apple.boot..... blah blah blah error"
Anyone have this issue and if so, how do you get around it.
i've spent the last 5 days researching this site and trying to find
everything i needed to get this working and i'm stumped.
Posted 07 September 2007 - 02:55 AM
Posted 12 September 2007 - 07:40 PM
yeah...what he said!! LOL
Is there a tried and true method for updating from Jas 10.4.8 to 10.4.9 or 10.4.10 without losing all the stuff i have done to my 10.4.8 (programs, data, etc). I looked for the tubgirl update, and didn't see it. I am worried about losing all this data, but i really would love to update.
Posted 16 September 2007 - 12:01 PM
Hi I installed Uphuck 10.4.9 1.3 works ok, only my ATI 9600 pro not working QE CI, any solution,
In Jas 10.4.8 my card works ok
Same here on my SSE2 machine, on Jas the 9700 works just fine (albeit without res changing) with the Uphuck or the SSE2/SSE3 10.4.9 updates out there it just stops working.
Posted 18 September 2007 - 03:01 AM
The video is low res 1024x768 although GMA.950.Support is currently installed.
No sound either Realtek ACL862 on the ASUS P5L-MX
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users