pgu Posted January 24, 2007 Share Posted January 24, 2007 (edited) Hi ! I'm proud and very happy to tell you that my new Sapphire X1950XT/256 is fully operationnal. I reinstalled a fresh system from last JAS 10.4.8/8.8.1 v1p + Defiant patch Got all my apps back in business, installed RTL1xxx patch, and finally a modified Natit. All working on my dell2407, with all rez available ! Used files are included. I believe theses files are also ok for X1950XTX P. x1950xt_xtx_drivers_FILES.zip Edited January 24, 2007 by pgu Link to comment Share on other sites More sharing options...
mdg Posted January 26, 2007 Share Posted January 26, 2007 Hi ! I'm proud and very happy to tell you that my new Sapphire X1950XT/256 is fully operationnal. I reinstalled a fresh system from last JAS 10.4.8/8.8.1 v1p + Defiant patch Got all my apps back in business, installed RTL1xxx patch, and finally a modified Natit. All working on my dell2407, with all rez available ! Used files are included. I believe theses files are also ok for X1950XTX P. Does sleep work on this card? If so, then it is truly fully working and I will buy. I've owned 3 cards now (nVidia and ATI), where I had everything you have, but not sleep. Let me know. Thanks. Link to comment Share on other sites More sharing options...
pgu Posted January 26, 2007 Author Share Posted January 26, 2007 Hi ! BTW, you're right, damn ! So far, I didn't get sleep to work. But I got it to work with my previous one, a Club3D X1600XT, for which I'm sure it was working, but kernel and drivers were not the same (10.4.7/8.4.1 + X1600 drivers for JAS 10.4.7 DVD) My X1600XT is for sale. Interested ? ;-) P. Link to comment Share on other sites More sharing options...
Ezhoon Posted January 28, 2007 Share Posted January 28, 2007 Hey, congrats One quick question : what is this Defiant patch? Link to comment Share on other sites More sharing options...
elfdood Posted January 28, 2007 Share Posted January 28, 2007 Hey, congrats One quick question : what is this Defiant patch? There is an issue with the original JAS discs and the Disk Utility, the patch basically replaces JAS version with an earlier version that has solved boot issues some peeps were having Link to comment Share on other sites More sharing options...
SaxMachine Posted January 28, 2007 Share Posted January 28, 2007 (edited) This is an Installar by jccool http://forum.insanelymac.com/index.php?showtopic=37175 Work very fine! Edited January 28, 2007 by SaxMachine Link to comment Share on other sites More sharing options...
hellogoodbye Posted February 23, 2007 Share Posted February 23, 2007 Could this make the X1950XT work on a Mac Pro by any chance? Link to comment Share on other sites More sharing options...
WiZMaC Posted February 24, 2007 Share Posted February 24, 2007 Hey Guys, Just wanted to let you know that I got sleep to work with my (2) vp2130b 21.3 Viewsonic DVI monitors including QE/CE/OGL/Dual-DVI running on Sapphire X1950XTX 512MB using DVI-A and not DVI-D =) This card is amazing!!! Worked out of the box with jaccool's installer... One thing though is the darn fan noise!! Arghhh but I'm a happy camper =) Hope this helps! Link to comment Share on other sites More sharing options...
meatloaf Posted May 6, 2007 Share Posted May 6, 2007 I also used jccool's installed and was able to get my Gigabyte X1950XTX working perfectly fine. However I am also getting the fan noise issue. From what I have read around on the forums it appears everyone who is using this card is getting this problem. Appears the graphics card is ramping uo the fan speed to keep itself cool. From what I can find it doesnt appear the card is over clocking itsself in anyway and no one has reported that it damages the card Hope some one finds a way to fix this soon. Other wise I have a 100% working OSx system Link to comment Share on other sites More sharing options...
Astyanax Posted May 6, 2007 Share Posted May 6, 2007 Yep, same here with the fan speed. I dont think its tricking the card into thinking its OCing, I think it somehow makes the card think its being used at 100% so the fan runs at max speed. I think the easiest way is to just get the equivilant of atitool for OSX But im sure thats no easy task... Link to comment Share on other sites More sharing options...
hackintom Posted May 6, 2007 Share Posted May 6, 2007 Have anyone tried another way of cooling it ? In order to suppress the noise... Link to comment Share on other sites More sharing options...
meatloaf Posted May 9, 2007 Share Posted May 9, 2007 Hmmm I think i miht be onto something here I was checking out the ATIRadeonX1000.kext on a real Mac (I own a Mac Book Pro as well) and noticed that OSx86, Natit and DiabolK's are all missing the following from the info.plist file <key>sensor-properties</key> <array> <dict> <key>device_type</key> <data> Z3B1LXNlbnNvcg== </data> <key>location</key> <string>GPU</string> <key>name</key> <string>gpu-sensor</string> <key>polling-period</key> <data> AAAAAQAAAAA= </data> <key>reg</key> <data> AAAAAg== </data> <key>sample-period</key> <data> AAAAAACYmAA= </data> <key>sensor-id</key> <data> AAAABg== </data> <key>version</key> <data> AAAAAg== </data> <key>zone</key> <data> AAAAAg== </data> </dict> </array> </dict> </dict> The above appears to be referencing the thermal senor and polling period for checking the temperature. It might be that the card once in 3d mode might need to be polled for a temp check and from there the card decides if it should go up or down in fan speed. Without this check I am thinknig the card defaults to higher speed automatically in order to protect the card from over heating. I am going to modify the Kext file and reference this in and see what happens (im not expecting it to fix the issue but its worth a try) Also another thing I have noticed while snooping around the x1950xt driver i have (downloaded from somethere on this site) is that it only refernces a x1950xtx in the ATIRadeonX1000.kext under the info.plist However there are other kexts and I have noticed that in two of the info.plists file the Hardware key used was for the x1950xt cards. Again I am thinknig that this will need to be changed to reference a x1950xtx. Well I hope someone who knows where there ding better than me see's this and might use what ive just said... but anyways I will try to modify the kexts and see what happens Have anyone tried another way of cooling it ?In order to suppress the noise... Link to comment Share on other sites More sharing options...
Khid Posted May 15, 2007 Share Posted May 15, 2007 Any chance of getting an HD2900XT up and running? =D I should've gotten this card instead of the 7900GS, man. >=\ Link to comment Share on other sites More sharing options...
drho2004 Posted May 16, 2007 Share Posted May 16, 2007 Hi ! I'm proud and very happy to tell you that my new Sapphire X1950XT/256 is fully operationnal. I reinstalled a fresh system from last JAS 10.4.8/8.8.1 v1p + Defiant patch Got all my apps back in business, installed RTL1xxx patch, and finally a modified Natit. All working on my dell2407, with all rez available ! Used files are included. I believe theses files are also ok for X1950XTX P. hello, any particular way of installing those files? i just dropped them off in my extensions folder, i did of course save the last ones too. but still nothing. i got the same card. saphire ati x1950xt 256mb PCIe. device ID 7442. nothing i tried Jccool's method, and nothing. i know the card is recognized because when i boot off the gma900 i can see it in system profiler as ati x1950xt serries card etc. and the fan turns on FULL speed, dang that thing is loud!! when i try to boot up with the card (im using dvi-vga) all i get is a blue screen. weird. suggestions? Link to comment Share on other sites More sharing options...
pgu Posted June 1, 2007 Author Share Posted June 1, 2007 Hi Did you change DVI port ? Do you use a DVI-VGA adapter ? Did you repair permissions ? Did you disabled the GMA900 chipset if possible in your bios ? Finally, did you try JCcool files ? Link to comment Share on other sites More sharing options...
precha L Posted June 10, 2007 Share Posted June 10, 2007 I hope my 1950PRO can do it, Who can help to me how I do it and fix QE and CI? Link to comment Share on other sites More sharing options...
sandni99a Posted July 20, 2007 Share Posted July 20, 2007 I hope my 1950PRO can do it, Who can help to me how I do it and fix QE and CI? It doesn't work. I've the same card. Link to comment Share on other sites More sharing options...
Scrizz Posted August 8, 2007 Share Posted August 8, 2007 http://forum.insanelymac.com/index.php?sho...=58988&st=0 Link to comment Share on other sites More sharing options...
wigworm Posted August 11, 2007 Share Posted August 11, 2007 OMG!!! PGU, thank you!!!. I could not get this card working for me for the life of me by using Jccool method. I've been working on it for days until I decided to give your file a try. And it worked!!! Thanks!!! Link to comment Share on other sites More sharing options...
identik Posted July 14, 2008 Share Posted July 14, 2008 I also have the fan noise on my ATI Radeon 1950 XTX, did anyone find a fix yet? Since i didn't buy a silent case for nothing It's making so much noise and it's driving me crazy !! Link to comment Share on other sites More sharing options...
EnzoFX Posted September 10, 2008 Share Posted September 10, 2008 Can I use these? Even though I'm currently using ATYInject? Maybe those that got it working with these can post more info =) Edit: Just tried it and didn't really work =( I deleted my ATYInject kext Copied these in, repaired permissions, then rebooted. My menubar is entirely transparent. The apple in the menubar is invisible, and it doesn't "feel" or look hardware accelerated during animations. I still can't watch videos, it's like it wants to play, but it's just a black static-y image. Ugh, dunno what else to try Link to comment Share on other sites More sharing options...
Recommended Posts