B612 Posted January 18, 2007 Share Posted January 18, 2007 Hi, guys. Since I am a dummy, I thought many people like me could find this guide useful. Here you are. Open Terminal. If you've already attempted to install the NTFS package: sudo rm -rf /Library/Receipts/NTFS-3g.pkg Otherwise, download MacFUSE DMG Installer NTFS-3g DMG Installer Install MacFUSE first and then NTFS-3g. In the Terminal, type: PATH=$PATH:/usr/local/bin export PATH sudo ln -s /System/Library/Filesystems/fusefs.fs/mount_fusefs /usr/local/bin/mount_fusefs sudo ln -s /usr/local/bin/ntfs-3g /usr/bin/ntfs-3g (you can copy and paste the code I have written here) Press enter. Now launch Disk Utility (Applications/Utilities/Disk Utility). Select the NTFS partition you want to write on. Click on "Information" (the blue "i" on top of Disk Utility). After the name and the type of the partition, there is a list of data. Read the first one, disk identification: in my case it is disk0s1 Note down the name (in my case it is WinXP Pro) and the disk identification (in my case "disk0s1") Close the info window and click on the button close to the blue "i". This should let you unmount the ntfs partition you've selected. Now in the Terminal, type: sudo mkdir /Volumes/"NTFS partition name" sudo ntfs-3g /dev/disk0s1 /Volumes/"NTFS partition name" -o ping_diskarb,volname="NTFS partition name" Of course substitute "NTFS partition name" with YOUR ntfs partition name (in my case "WinXP Pro"), but keep the quotes before and after that! Now type cd /etc sudo nano fstab A blank text file will open in the Terminal window. Here type LABEL=NTFS partition name /private/mnt/NTFS partition name ntfs ro,noauto Here also, substitute "NTFS partition name" with YOUR ntfs partition name (in my case "WinXP Pro"), but in this case DO NOT use quotes. Close (Command+x), save (type "y") and exit (push enter). Type (always in your Terminal) cd /System/Library/StartupItems/Disks/ sudo nano Disks (you can copy and paste from here) This will open another text file. Look for the line "/sbin/autodiskmount -va". Go after that line with the arrows of your keyboard and type PATH=$PATH:/usr/local/bin export PATH mkdir /Volumes/Windows (you can change Windows to whatever name, but write only one word, i.e. NO SPACE!!!) ntfs-3g /dev/disk identification /Volumes/"Windows" -o ping_diskarb,volname="Windows" (you have to change "disk identification" to your disk identification you've noted down before.) Close (Command+x), save (type "y") and exit (push enter). type "exit" in the Terminal and reboot your computer. If you've done everything properly, you should see your NTFS partition on the desktop after booting and you'll be able to modify it as you want. Enjoy. Link to comment Share on other sites More sharing options...
FavleX Posted January 19, 2007 Share Posted January 19, 2007 ..thanks for the guide, but unfortunately I got problems lke others in this forum.. ..during the step llustrated from the guide I'm able to mount ntfs in write mode as a network disk, but after reboot no ntfs partition mounted on te desktop and in Disk utilty I see the partion shown as a ntfs 3g r/w but the application can't mount it...any suggestion for improving my experience?? thanks again. Link to comment Share on other sites More sharing options...
B612 Posted January 19, 2007 Author Share Posted January 19, 2007 ..thanks for the guide, but unfortunately I got problems lke others in this forum....during the step llustrated from the guide I'm able to mount ntfs in write mode as a network disk, but after reboot no ntfs partition mounted on te desktop and in Disk utilty I see the partion shown as a ntfs 3g r/w but the application can't mount it...any suggestion for improving my experience?? thanks again. Have you followed THIS guide? Have you used the names that you've found in "Information" from Disk Utility, for writing in fstab and Disks? If not, that's why it doesn't work after rebooting... let me know. Link to comment Share on other sites More sharing options...
FavleX Posted January 19, 2007 Share Posted January 19, 2007 Have you followed THIS guide?Yes!Have you used the names that you've found in "Information" from Disk Utility, for writing in fstab and Disks? Yes! ....Do you think i need to use the new pkg in the other post (release b3..),for solving..?? thanks foryourtime Man. Link to comment Share on other sites More sharing options...
B612 Posted January 19, 2007 Author Share Posted January 19, 2007 Absolutely! Use the latest release and let me know. Link to comment Share on other sites More sharing options...
caracols Posted January 20, 2007 Share Posted January 20, 2007 Worked flawlessly on the first try! Thanks a lot! Link to comment Share on other sites More sharing options...
FavleX Posted January 20, 2007 Share Posted January 20, 2007 Yes , now is being mounted on boot automatically , but the system is very intensive working (34-57%)idle until I umount it and then everythings back ok. Yes just a step ahead ,then before, but not 100% done yet. Thanks for your real efforts! Link to comment Share on other sites More sharing options...
B612 Posted January 20, 2007 Author Share Posted January 20, 2007 favalessa, could you write your system specs? Link to comment Share on other sites More sharing options...
FavleX Posted January 20, 2007 Share Posted January 20, 2007 (edited) ..first time I do that.. ..Is it working?? ..sorry B612 , I'm a little bit on the niubie side!! EDIT:..Yes!Works!Hope it helps. Edited January 20, 2007 by favalessa Link to comment Share on other sites More sharing options...
FavleX Posted January 21, 2007 Share Posted January 21, 2007 update: I got monted it on the desktop like a network drive as zero kb and zero free space drive.It is writable but the processors stays idle with 50 percent .Then i umount it, and remount with disk utilty at this point it is correctly mounted in r/w mode with zero problem. Do you think is a problem about fstab and automount?? Link to comment Share on other sites More sharing options...
B612 Posted January 21, 2007 Author Share Posted January 21, 2007 Honestly, I think you've accidentally done something wrong during the installation/configuration phase. Unfortunately, I cannot say more than this, because in this very moment I am leaving, and I'll be back home in 3-4 days. Till then I could not help... sorry about that! Link to comment Share on other sites More sharing options...
veggieryan Posted February 23, 2007 Share Posted February 23, 2007 is there any way to mount a dmg image of an NTFS disk? i need to restore this image. it was a backup made with copycatx. I am able to mount other ntfs drives with no problems. when I try to mount it i get this error: john-smiths-computer:~ johnsmith$ sudo /usr/local/bin/ntfs-3g /Users/johnsmith/Documents/"windows xp backup.dmg" /Volumes/windowsxp -o ping_diskarb,volname="windowsxp" Bootsector checksum failed. Failed to startup volume: Invalid argument Failed to mount '/Users/johnsmith/Documents/windows xp backup.dmg': Invalid argument The device '/Users/johnsmith/Documents/windows xp backup.dmg' doesn't have a valid NTFS. Maybe you selected the wrong device? Or the whole disk instead of a partition (e.g. /dev/hda, not /dev/hda1)? Or the other way around? john-smiths-computer:~ johnsmith$ mount ? mount: ?: unknown special file or file system. john-smiths-computer:~ johnsmith$ Link to comment Share on other sites More sharing options...
CaWa Koh Posted April 6, 2008 Share Posted April 6, 2008 hi B612, I need your help.. I followed your steps.. everything went smooth till the part you mention that " the blank text edit will appear." (the part where you will have to type in the "LABEL=.........") somehow i do not see any blank text edit pop out.. do you know anything tat could went wrong? Thanks a million in advance! Link to comment Share on other sites More sharing options...
B612 Posted April 6, 2008 Author Share Posted April 6, 2008 hi B612, I need your help.. I followed your steps.. everything went smooth till the part you mention that " the blank text edit will appear." (the part where you will have to type in the "LABEL=.........") somehow i do not see any blank text edit pop out.. do you know anything tat could went wrong? Thanks a million in advance! Hi. In fact you shouldn't see any popups. You should see the blank text IN your terminal. I mean that in the terminal you should see an editable white screen, where you can type what I wrote. Here, if you press "Enter" you will not enter a command, but you will go to the next line, exactly like in a text field. By the way, I wrote this guide long ago. Now you can find many self-installing packages on the Internet. Just look for them and you'll see. Link to comment Share on other sites More sharing options...
tessa17 Posted June 15, 2008 Share Posted June 15, 2008 hi B612, just was wondering before i try to do this what to do. Paragon has a software for mac called ntfs for mac that allows users to read write in mac, many programs install pretty much on ok in my hackintosh but i was wondering if you knew anything about this program. If so was it safe to use? Link to comment Share on other sites More sharing options...
B612 Posted June 15, 2008 Author Share Posted June 15, 2008 hi B612, just was wondering before i try to do this what to do. Paragon has a software for mac called ntfs for mac that allows users to read write in mac, many programs install pretty much on ok in my hackintosh but i was wondering if you knew anything about this program. If so was it safe to use? Hi, Tessa. I know nothing about the program you mentioned. Sorry, I can't help you. Link to comment Share on other sites More sharing options...
macgirl Posted June 16, 2008 Share Posted June 16, 2008 I know it, I have installed Paragon in all my Macs and Hackintoshes, it works really fast and confiable (latest version of course), it has some little issues yet (none critical). Is fater than MacFUSE + NTFS-3g, it has a pane in the System Preferences that allows you several things like not writing access time which speeds up, compression, Permissions, and if you want to switch it off to have the normal NTFS driver. Worths the $. Link to comment Share on other sites More sharing options...
Recommended Posts