Jump to content

LaptopDisplay


  • Please log in to reply
428 replies to this topic

#281
SkyZ

SkyZ

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 126 posts

Hi np_, thks for your help but it doesn't work, colour banding still there..... :P
Here's what I got from start up/-v mode:

IOPanelDevice: Machine Is Laptop!
IOPanelDevice: Registered OK!
LaptopPanelA: Started Ok!
ALCinject: Starting.
ALCinject: Setting built-in=<data not shown>
ALCinject: Setting layout-id=<data not shown>
ALCinject: Setting PinConfigurations=<data not shown>
NVDA::probe(VID)
Natit: Starting.
device-id: 0x01D7
Natit: Found device
Natit: Found device name
Natit: Setting @1,EDID=<data not shown>
Natit: Setting @0,NVMT=<data not shown>
Natit: Setting AAPL00,Dither=0x00000001
Natit: Setting device_type=NVDA,Parent
Natit: Setting @1,device_type=display
Natit: Setting @0,EDID=<data not shown>
Natit: Setting @0,compatible=NVDA,NVMac
Natit: Setting @0,fboffset=0x00020000
Natit: Setting @1,compatible=NVDA,NVMac
Natit: Setting @1,name=NVDA,Display-B
Natit: Setting @0,name=NVDA,Display-A
Natit: Setting NVCAP=<data not shown>
Natit: Setting @0,device_type=display
Natit: Setting model=nVidia Quadro NVS 110M
NVDA::start(VID) <1>
NVDA::start(VID) <1> failed


Oh my god!!! The long standing problem is gone!!!!!!! What I did was load BOTH Natit Uni 1.0 & latest NVidiaEFI. Thanks alot np_ !!!!!

#282
nody

nody

    InsanelyMac Protテゥgテゥ

  • Members
  • PipPip
  • 63 posts
Ok, here we go...

System pro reports (once again):

Jan 29 13:40:30 localhost kernel[0]: IOPanelDevice: Machine Is Laptop!
Jan 29 13:40:30 localhost kernel[0]: IOPanelDevice: Registered OK!
Jan 29 13:40:30 localhost kernel[0]: LaptopPanelA: Started Ok!
Jan 29 13:40:30 localhost kernel[0]: NV: NVidiaEFI Support Version 1.0.1, build 1301072018
Jan 29 13:40:30 localhost kernel[0]: NV: Internal LCD Panel Detected On Output: B, Head N: 1
Jan 29 13:40:30 localhost kernel[0]: NV: Internal LCD Panel Max Resolution: 1280x1024
Jan 29 13:40:30 localhost kernel[0]: ApplePS2Trackpad: Synaptics TouchPad v5.8
Jan 29 13:40:30 localhost kernel[0]: wl0: Broadcom BCM4320 802.11 Wireless Controller
Jan 29 13:40:30 localhost kernel[0]: 4.80.46.0AppleAC97CodecAD198x: 2-to-4 channel spreading enabled
Jan 29 13:40:30 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jan 29 13:40:27 localhost mDNSResponder-108.2 (Aug 25 2006 14: 50:48)[61]: starting
Jan 29 13:40:28 localhost memberd[68]: memberd starting up
Jan 29 13:40:30 localhost lookupd[74]: lookupd (version 369.6) starting - Mon Jan 29 13:40:30 2007
Jan 29 13:40:32 localhost diskarbitrationd[67]: disk0s2 hfs D61F50E2-9F8F-3155-A9DD-FD7A6AE787B9 Mac Os /
Jan 29 13:40:33 localhost diskarbitrationd[67]: disk0s1 ntfs 00000000-0000-0000-0000-000000000000 Untitled /Volumes/Untitled
Jan 29 13:40:33 localhost kernel[0]: NVDA,Display-B: Not usable
Jan 29 13:40:33 localhost DirectoryService[78]: Launched version 2.1 (v353.5)
Jan 29 13:40:36 localhost mDNSResponder: Couldn't read user-specified Computer Name; using default “Macintosh-000000000000” instead
Jan 29 13:40:36 localhost mDNSResponder: Couldn't read user-specified local hostname; using default “Macintosh-000000000000.local” instead

and
Chipset Model: NVIDIA GeForce FX Go5700
Type: Display
Bus: PCI
VRAM (Total): 256 MB (shouldnエt this be 128MB??)
Vendor: nVIDIA (0x10de)
Device ID: 0x0348
Revision ID: 0x00a1
Displays:
Display:
Resolution: 1280 x 1024
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Display:


This using the new Kext np_ provided.

IOREG as follows:

Attached File  ioreg_FXGo5700.txt   273.59KB   18 downloads

No luck, so it seems once again. Should i go and edit NVidiaEFI.kext with my DevID, np_?? :unsure:
Still donエt have even Resolution change ability... :P (mineエs set trough com.appleboot.plist)

Edited by nody, 29 January 2007 - 02:08 PM.


#283
joe75

joe75

    Renegade

  • Retired
  • 2,286 posts
  • Gender:Male
  • Location:Rochester, NY

Should i go and edit NVidiaEFI.kext with my DevID, np_?? :rolleyes:
Still donエt have even Resolution change ability... :hysterical: (mineエs set trough com.appleboot.plist)


Try with Titan added and edit Your id into Titan or try with Natit added like SkyZ

#284
nody

nody

    InsanelyMac Protテゥgテゥ

  • Members
  • PipPip
  • 63 posts
Ok something change, still no resolution change ability, thow:

Jan 29 15:06:24 localhost kernel[0]: IOPanelDevice: Machine Is Laptop!
Jan 29 15:06:24 localhost kernel[0]: IOPanelDevice: Registered OK!
Jan 29 15:06:24 localhost kernel[0]: LaptopPanelA: Started Ok!
Jan 29 15:06:24 localhost kernel[0]: ApplePS2Trackpad: Synaptics TouchPad v5.8
Jan 29 15:06:24 localhost kernel[0]: AppleAC97CodecAD198x: 2-to-4 channel spreading enabled
Jan 29 15:06:24 localhost kernel[0]: wl0: Broadcom BCM4320 802.11 Wireless Controller
Jan 29 15:06:24 localhost kernel[0]: 4.80.46.0Natit: Starting.
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting device_type=NVDA,Parent
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @1,device_type=display
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @0,compatible=NVDA,NVMac
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @1,compatible=NVDA,NVMac
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @0,fboffset=0x00020000
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @1,name=NVDA,Display-B
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @0,name=NVDA,Display-A
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting NVCAP=<data not shown>
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @0,device_type=display
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting model=Unknown nVidia
Jan 29 15:06:24 localhost kernel[0]: NV: NVidiaEFI Support Version 1.0.1, build 1301072018
Jan 29 15:06:24 localhost kernel[0]: NV: Internal LCD Panel Detected On Output: B, Head N: 1
Jan 29 15:06:24 localhost kernel[0]: NV: Internal LCD Panel Max Resolution: 1280x1024
Jan 29 15:06:24 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jan 29 15:06:23 localhost mDNSResponder-108.2 (Aug 25 2006 14: 50:48)[58]: starting
Jan 29 15:06:23 localhost memberd[65]: memberd starting up
Jan 29 15:06:25 localhost lookupd[71]: lookupd (version 369.6) starting - Mon Jan 29 15:06:25 2007
Jan 29 15:06:27 localhost diskarbitrationd[64]: disk0s2 hfs D61F50E2-9F8F-3155-A9DD-FD7A6AE787B9 Mac Os /
Jan 29 15:06:28 localhost kernel[0]: BCM5701Enet: Ethernet address 00:c0:9f:41:1e:b8
Jan 29 15:06:28 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:0b:6b:4b:88:15
Jan 29 15:06:28 localhost kernel[0]: NVDA,Display-A: Not usable
Jan 29 15:06:28 localhost diskarbitrationd[64]: disk0s1 ntfs 00000000-0000-0000-0000-000000000000 Untitled /Volumes/Untitled

So, is it possible that my edit com.appleBoot.plist, is not leting me change my resolution trough display preferences??

Latest IOREG:

Attached File  ioreg_fxgo5700NATIT.txt   274.55KB   8 downloads

Forgot to say that Booted to desk with no black or withe, or kernel panics, guess itエs some kind of sucess no?? :tomato:

Edited by nody, 29 January 2007 - 03:28 PM.


#285
SkyZ

SkyZ

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 126 posts

Ok something change, still no resolution change ability, thow:

Jan 29 15:06:24 localhost kernel[0]: IOPanelDevice: Machine Is Laptop!
Jan 29 15:06:24 localhost kernel[0]: IOPanelDevice: Registered OK!
Jan 29 15:06:24 localhost kernel[0]: LaptopPanelA: Started Ok!
Jan 29 15:06:24 localhost kernel[0]: ApplePS2Trackpad: Synaptics TouchPad v5.8
Jan 29 15:06:24 localhost kernel[0]: AppleAC97CodecAD198x: 2-to-4 channel spreading enabled
Jan 29 15:06:24 localhost kernel[0]: wl0: Broadcom BCM4320 802.11 Wireless Controller
Jan 29 15:06:24 localhost kernel[0]: 4.80.46.0Natit: Starting.
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting device_type=NVDA,Parent
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @1,device_type=display
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @0,compatible=NVDA,NVMac
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @1,compatible=NVDA,NVMac
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @0,fboffset=0x00020000
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @1,name=NVDA,Display-B
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @0,name=NVDA,Display-A
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting NVCAP=<data not shown>
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting @0,device_type=display
Jan 29 15:06:24 localhost kernel[0]: Natit: Setting model=Unknown nVidia
Jan 29 15:06:24 localhost kernel[0]: NV: NVidiaEFI Support Version 1.0.1, build 1301072018
Jan 29 15:06:24 localhost kernel[0]: NV: Internal LCD Panel Detected On Output: B, Head N: 1
Jan 29 15:06:24 localhost kernel[0]: NV: Internal LCD Panel Max Resolution: 1280x1024
Jan 29 15:06:24 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jan 29 15:06:23 localhost mDNSResponder-108.2 (Aug 25 2006 14: 50:48)[58]: starting
Jan 29 15:06:23 localhost memberd[65]: memberd starting up
Jan 29 15:06:25 localhost lookupd[71]: lookupd (version 369.6) starting - Mon Jan 29 15:06:25 2007
Jan 29 15:06:27 localhost diskarbitrationd[64]: disk0s2 hfs D61F50E2-9F8F-3155-A9DD-FD7A6AE787B9 Mac Os /
Jan 29 15:06:28 localhost kernel[0]: BCM5701Enet: Ethernet address 00:c0:9f:41:1e:b8
Jan 29 15:06:28 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:0b:6b:4b:88:15
Jan 29 15:06:28 localhost kernel[0]: NVDA,Display-A: Not usable
Jan 29 15:06:28 localhost diskarbitrationd[64]: disk0s1 ntfs 00000000-0000-0000-0000-000000000000 Untitled /Volumes/Untitled

So, is it possible that my edit com.appleBoot.plist, is not leting me change my resolution trough display preferences??

Latest IOREG:

Attached File  ioreg_fxgo5700NATIT.txt   274.55KB   8 downloads

Forgot to say that Booted to desk with no black or withe, or kernel panics, guess itエs some kind of sucess no?? :tomato:


Not really sure will it work or not, but you might try put in your DevID to NVDANV20Hal or NVDANV30Hal.kext, GeForce.kext and NVDAResman.kext. Also, looks like Natit doesn't recognise your 5700 Go, you can try add an entry to the info.plist.

#286
nody

nody

    InsanelyMac Protテゥgテゥ

  • Members
  • PipPip
  • 63 posts
Never done none of sort, so need help here:

<string>display</string>
<key>IOPCIMatch</key>
<string>0x000010de&amp;0x0000ffff</string> should i change this??
<key>IOProbeScore</key>
<integer>0</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>entriesToAdd</key> or add here?? if so what to add?? only Dev ID??
<dict>

Edited by nody, 29 January 2007 - 04:29 PM.


#287
ProjectMx5

ProjectMx5

    InsanelyMac Protテゥgテゥ

  • Just Joined
  • Pip
  • 3 posts
I Have been reading this forum for the last week or so and Im a little confused as to what Im suppost to do to get it to work, or at lease test it. Can some one please post instructions on what goes in what and what files that I need. Also the EDID How what when why?

I have and Inspiron 8500 with a Geforce 440 Go 64mb. I seem to have gotten the Video driver to work but have the fade to white problem.

I know that my system is popular does anyone have any edited Kext that I can review so I can understand what Im suppost to be doing.

Thanks, Im a simi noob

#288
nody

nody

    InsanelyMac Protテゥgテゥ

  • Members
  • PipPip
  • 63 posts
Ok news on the testエs, with natit dual 01, it didnエt recognise my card, also with GeForce and NVDANV30hal an NVDAResman got the old black and withe screen.

So i decided to try a diferent Natit, the one with all that entries for cards, modify the one for FxGo5700, because my ID was not the one provided by np_, with mine and this is what i got.

system pro:

Jan 29 17:58:42 localhost kernel[0]: device-id: 0x0348
Jan 29 17:58:42 localhost kernel[0]: Found device
Jan 29 17:58:42 localhost kernel[0]: Found device name
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @1,EDID=<data not shown>
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,NVMT=<data not shown>
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting device_type=NVDA,Parent
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @1,device_type=display
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,EDID=<data not shown>
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,compatible=NVDA,NVMac
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,fboffset=0x00020000
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @1,compatible=NVDA,NVMac
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @1,name=NVDA,Display-B
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,name=NVDA,Display-A
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting NVCAP=<data not shown>
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,device_type=display
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting model=nVidia Quadro FX Go1000 This should be FxGo5700, or should not??
Jan 29 17:58:42 localhost kernel[0]: NV: NVidiaEFI Support Version 1.0.1, build 1301072018
Jan 29 17:58:42 localhost kernel[0]: NV: Internal LCD Panel Detected On Output: B, Head N: 1
Jan 29 17:58:42 localhost kernel[0]: NV: Internal LCD Panel Max Resolution: 1280x1024
Jan 29 17:58:42 localhost kernel[0]: Natit: Starting.
Jan 29 17:58:42 localhost kernel[0]: device-id: 0x0348
Jan 29 17:58:42 localhost kernel[0]: Found device
Jan 29 17:58:42 localhost kernel[0]: Found device name
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @1,EDID=<data not shown>
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,NVMT=<data not shown>
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting device_type=NVDA,Parent
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @1,device_type=display
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,EDID=<data not shown>
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,compatible=NVDA,NVMac
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,fboffset=0x00020000
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @1,compatible=NVDA,NVMac
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @1,name=NVDA,Display-B
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,name=NVDA,Display-A
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting NVCAP=<data not shown>
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting @0,device_type=display
Jan 29 17:58:42 localhost kernel[0]: Natit: Setting model=nVidia Quadro FX Go1000 This should be FxGo5700, or should not??
Jan 29 17:58:42 localhost kernel[0]: NV: NVidiaEFI Support Version 1.0.1, build 1301072018
Jan 29 17:58:43 localhost kernel[0]: NV: Internal LCD Panel Detected On Output: B, Head N: 1
Jan 29 17:58:43 localhost kernel[0]: NV: Internal LCD Panel Max Resolution: 1280x1024
Jan 29 17:58:43 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jan 29 17:58:41 localhost mDNSResponder-108.2 (Aug 25 2006 14: 50:48)[60]: starting
Jan 29 17:58:41 localhost memberd[67]: memberd starting up
Jan 29 17:58:43 localhost lookupd[73]: lookupd (version 369.6) starting - Mon Jan 29 17:58:43 2007
Jan 29 17:58:45 localhost kernel[0]: BCM5701Enet: Ethernet address 00:c0:9f:41:1e:b8
Jan 29 17:58:45 localhost kextd[27]: kextd_watch_volumes: couldn't set up diskarb sessions
Jan 29 17:58:45 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:0b:6b:4b:88:15
Jan 29 17:58:45 localhost kernel[0]: NVDA,Display-A: Not usable
Jan 29 17:58:45 localhost DirectoryService[79]: Launched version 2.1 (v353.5)
Jan 29 17:58:46 localhost diskarbitrationd[66]: disk0s2 hfs D61F50E2-9F8F-3155-A9DD-FD7A6AE787B9 Mac Os


IOREG:
Attached File  ioreg_FxGo5700NewNatit.txt   275.38KB   7 downloads

If only someone could give a hint, feel like i close... :whistle: , even thow i dont no where to go :censored2:

#289
whynot

whynot

    InsanelyMac Protテゥgテゥ

  • Members
  • Pip
  • 13 posts
hi,np_,sorry for bothering you again and again. :censored2:

here are my test results.

first of all ,it seems that NVidiaEFI.kext is not compatible with my system ,cause if i put it into Extentions,my laptop boots into black screen.the system log is like this:

Jan 30 02:15:32 localhost kernel[0]: Matching service count = 4
Jan 30 02:15:32 localhost kernel[0]: IOPanelDevice: Machine Is Laptop!
Jan 30 02:15:32 localhost kernel[0]: IOPanelDevice: Registered OK!
Jan 30 02:15:32 localhost kernel[0]: LaptopPanelA: Started Ok!
Jan 30 02:15:32 localhost kernel[0]: NVDANV40HAL loaded and registered.
Jan 30 02:15:32 localhost kernel[0]: ApplePS2Trackpad: Synaptics TouchPad v6.2
Jan 30 02:15:32 localhost kernel[0]: NVID: family specific matching fails
Jan 30 02:15:32 localhost kernel[0]: NVID: family specific matching fails
Jan 30 02:15:32 localhost kernel[0]: NV: NVidiaEFI Support Version 1.0.1, build 1301072018
Jan 30 02:15:32 localhost kernel[0]: NV: Internal LCD Panel Detected On Output: A, Head N: 0
Jan 30 02:15:32 localhost kernel[0]: NV: Internal LCD Panel Max Resolution: 1280x800
Jan 30 02:15:32 localhost kernel[0]: NVID: family specific matching fails
Jan 30 02:15:32 localhost kernel[0]: NV: NVidiaEFI Support Version 1.0.1, build 1301072018
Jan 30 02:15:32 localhost kernel[0]: NV: Internal LCD Panel Detected On Output: A, Head N: 0
Jan 30 02:15:32 localhost kernel[0]: NV: Internal LCD Panel Max Resolution: 1280x800
Jan 30 02:15:32 localhost mDNSResponder-108.2 (Aug 25 2006 14: 50:48)[56]: starting

and if i put Titan into the Extentions as well as NVidiaEFI,it can recognize my graphic card,here is the system log:

Jan 30 02:08:08 localhost kernel[0]: Matching service count = 4
Jan 30 02:08:08 localhost kernel[0]: IOPanelDevice: Machine Is Laptop!
Jan 30 02:08:08 localhost kernel[0]: IOPanelDevice: Registered OK!
Jan 30 02:08:08 localhost kernel[0]: LaptopPanelA: Started Ok!
Jan 30 02:08:08 localhost kernel[0]: NVDANV40HAL loaded and registered.
Jan 30 02:08:08 localhost kernel[0]: ApplePS2Trackpad: Synaptics TouchPad v6.2
Jan 30 02:08:08 localhost kernel[0]: NVID: family specific matching fails
Jan 30 02:08:08 localhost kernel[0]: NVID: family specific matching fails
Jan 30 02:08:08 localhost kernel[0]: NVID: family specific matching fails
Jan 30 02:08:08 localhost kernel[0]: Titan: By omni, built November 4, 2006
Jan 30 02:08:08 localhost kernel[0]: Titan: Testing for NVidia card...
Jan 30 02:08:08 localhost kernel[0]: Titan: Found NVIDIA GeForce Go 7400
Jan 30 02:08:08 localhost kernel[0]: Titan: All set, cross your fingers!
Jan 30 02:08:08 localhost kernel[0]: NV: NVidiaEFI Support Version 1.0.1, build 1301072018
Jan 30 02:08:08 localhost kernel[0]: NV: Internal LCD Panel Detected On Output: A, Head N: 0
Jan 30 02:08:08 localhost kernel[0]: NV: Internal LCD Panel Max Resolution: 1280x800
Jan 30 02:08:08 localhost memberd[64]: memberd starting up

it looks like that everything is going smoothly,but i don't know why the system boots into black screen,i know it works well behind the black screen ,because i can force it restart using shortcut keys.

attachment are the ioregs,both of With Titan or Without Titan.
please check them as long as you have spare time?
i know you are very busy ,thank you again.

Attached Files



#290
JaccoH

JaccoH

    InsanelyMac Protテゥgテゥ

  • Members
  • Pip
  • 39 posts
Vendor of Laptop: Acer (its a 5024 with X700 card)

Monitor
Windows description......... Generic PnP Monitor
Manufacturer................ AUO
覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Plug and Play ID............ AUO0F0D
Serial number............... n/a
EDID data source............ I2C bus (real-time)
覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Manufacture date............ 2004, ISO week 1
EDID revision............... 1.3
Display type and signal..... Digital
Sync input support.......... n/a
Screen size................. 330 x 210 mm (~16")
Power management............ n/a

Color characteristics
Display gamma............... 2,20
Red chromaticity............ Rx 0,600 - Ry 0,340
Green chromaticity.......... Gx 0,310 - Gy 0,560
Blue chromaticity........... Bx 0,150 - By 0,130
White point (default)....... Wx 0,313 - Wy 0,329

Timing characteristics
VESA GTF support............ Not supported
Horizontal scan range....... n/a
Vertical scan range......... n/a
Video bandwidth............. n/a
Extension blocks............ n/a
Timing recommendation #1.... 1280x800 at 60Hz
Modeline................ "1280x800" 68,900 1280 1301 1333 1408 800 804 808 816 -hsync -vsync

Standard timings supported
n/a

Raw EDID base
00: 00 FF FF FF FF FF FF 00 06 AF 0D 0F 00 00 00 00
10: 01 0E 01 03 80 21 15 78 0A 85 95 99 57 4F 8F 26
20: 21 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
30: 01 01 01 01 01 01 EA 1A 00 80 50 20 10 30 15 20
40: 44 00 4B CF 10 00 00 18 00 00 00 0F 00 42 31 35
50: 34 45 57 30 31 20 56 2E 37 02 00 00 00 FE 00 41
60: 55 4F 0A 20 20 20 20 20 20 20 20 20 00 00 00 FE
70: 00 42 31 35 34 45 57 30 31 20 56 2E 37 0A 00 8A

Display adapter
Adapter description......... ATI MOBILITY RADEON X700
Adapter device ID........... 0x56531002
Display settings............ 1280x800, 32bpp

User/computer information
Registered user name........ Jacco
Registered organization..... n/a
Network user name........... Jacco
Network computer name....... HOEVE-LAPTOP
Windows version ............ Windows 2000
Windows build .............. 6.00.6000
Installation date .......... n/a

#291
joshlawless

joshlawless

    InsanelyMac Protテゥgテゥ

  • Members
  • Pip
  • 30 posts
  • Gender:Male
  • Location:California
I also found that my DisplayProductID has been changed in ioreg from 0 to 1815. However, I still don't get resolution changing, or the proper screen info in syspro. I tried atting natit.kext, adding my deviceID and my device name to the list, and adding edited geforce.kext, nvda40hal.kext and nvdaresman.kext files. This wouldn't boot at all!

Anyhoo, attached is my ioreg file from the boot with just the new iographicsfamily.kext, nvidiaefi.kext and laptopdisplay.kext files installed (with no ATI*.kext, geforce.kext or NV*.kext installed at all)

Still seeing dependency errors in the system profiler for laptopdisplay.kext, complaining about no valid version of iographicsfamily.kext or iondrvsupport.kext

Attached Files



#292
prepressman

prepressman

    InsanelyMac Protテゥgテゥ

  • Members
  • Pip
  • 41 posts
  • Gender:Male
  • Location:S縊 Paulo - Brazil
Hi np, What I do now?

Attached File  IOreg.txt   315KB   13 downloads

#293
joshlawless

joshlawless

    InsanelyMac Protテゥgテゥ

  • Members
  • Pip
  • 30 posts
  • Gender:Male
  • Location:California

I Have been reading this forum for the last week or so and Im a little confused as to what Im suppost to do to get it to work, or at lease test it. Can some one please post instructions on what goes in what and what files that I need. Also the EDID How what when why?

I have and Inspiron 8500 with a Geforce 440 Go 64mb. I seem to have gotten the Video driver to work but have the fade to white problem.

I know that my system is popular does anyone have any edited Kext that I can review so I can understand what Im suppost to be doing.

Thanks, Im a simi noob


There are two things you need to do.

First, create a custom display info file using the display utility np_ posted in post #109 (inside the file AllLaptop.zip). To do so, you will need the EDID information from your monitor, which you can obtain using the moninfo.exe file (in the windows operating system environment) which np_ posted in post #103. Once you have your EDID information, you need to use some text editor to organize it into eight character blocks like so:

000000ff ff123456 12345678 12345678 12345678 12345678 etc.

Then, in the display utility (in the OS X environment), paste the first sixteen digits of this EDID data into the appropriate box, and hit "parse" and "save" (or the equivalent). This will create a folder DisplayVendorID-XXXX in which a file ProductVendorID-YYYY is located. This folder and file will be located in the same folder you launched display utility from.

Open the ProductVendorID-YYYY file with Property List editor (also posted here, not sure which post #, but built into OS X anyways, I think), and add your EDID info as ably described by Nebzar in post #126 (create new key "IODisplayEDID" type "data" with contents "<your edid in eight digit character groups as described above>"

Save this file, then move the whole DisplayVendorID-XXXX file to /system/library/displays/overrides/


Second, you need to install laptopdisplay.kext, iographicsfamily.kext, and nvidiaefi.kext, the most recent versions of which are posted in post #277. Delete the kext cache and manually repair the permissions and reboot (while crossing your fingers).

If you don't get your screen resolution working the way you'd like, post your ioreg output here for np_ to review by typing "ioreg -l -w 1024 > ioregfilename.txt" in a terminal window. Whichever folder you were in while in the terminal window (it defaults to your home folder), the file ioregfilename.txt will be saved. Upload it and describe your symptoms.

#294
SkyZ

SkyZ

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 126 posts

hi,np_,sorry for bothering you again and again. :rolleyes:

here are my test results.

first of all ,it seems that NVidiaEFI.kext is not compatible with my system ,cause if i put it into Extentions,my laptop boots into black screen.the system log is like this:

it looks like that everything is going smoothly,but i don't know why the system boots into black screen,i know it works well behind the black screen ,because i can force it restart using shortcut keys.

attachment are the ioregs,both of With Titan or Without Titan.
please check them as long as you have spare time?
i know you are very busy ,thank you again.


Looks like you need VGA output A <--> B swapping (try connect an external monitor to your laptop and see how it goes)

#295
SkyZ

SkyZ

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 126 posts

Ok news on the testエs, with natit dual 01, it didnエt recognise my card, also with GeForce and NVDANV30hal an NVDAResman got the old black and withe screen.

So i decided to try a diferent Natit, the one with all that entries for cards, modify the one for FxGo5700, because my ID was not the one provided by np_, with mine and this is what i got.

If only someone could give a hint, feel like i close... :) , even thow i dont no where to go :rolleyes:


Maybe you can try making Titan or Natit Uni 1.0 work before deploy nVidiaEFI. For edit info.plist in NVDANV30HAL, NVDAResman.... etc, I'll try to make some screen shots when I back home, think that'll be easier to show people how. Before that, you getta find a copy of PlistEdit Pro and install it on your machine.

#296
whynot

whynot

    InsanelyMac Protテゥgテゥ

  • Members
  • Pip
  • 13 posts

Looks like you need VGA output A <--> B swapping (try connect an external monitor to your laptop and see how it goes)


I've not got a external monitor and the realvnc doesn't work on my laptop.

by the way,how to swap VGA output A and B?

#297
joe75

joe75

    Renegade

  • Retired
  • 2,286 posts
  • Gender:Male
  • Location:Rochester, NY
I would suggest you guys try to use Titan and if you choose Natit, be sure to have only your dev id in the plist and remove all others :rolleyes:

#298
ksuhumpy

ksuhumpy

    InsanelyMac Protテゥgテゥ

  • Members
  • Pip
  • 19 posts
Hello all.

This is my first post on IM and I really want to thank the community for being so helpful and creative. Tonight after my ~15th install of osX I finally was able to get titan working with CI and QE and I was overjoyed, but then after a reboot the dreaded blank screen began. I have gone through the tutorial and am posting my ioreg. I tried to follow protocol but if something needs to be changed let me know. I hope someone can help. Thank you.

Jason

Attached Files



#299
SkyZ

SkyZ

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 126 posts

I've not got a external monitor and the realvnc doesn't work on my laptop.

by the way,how to swap VGA output A and B?


Check out post # 180

#300
nody

nody

    InsanelyMac Protテゥgテゥ

  • Members
  • PipPip
  • 63 posts

Maybe you can try making Titan or Natit Uni 1.0 work before deploy nVidiaEFI. For edit info.plist in NVDANV30HAL, NVDAResman.... etc, I'll try to make some screen shots when I back home, think that'll be easier to show people how. Before that, you getta find a copy of PlistEdit Pro and install it on your machine.


That would be nice for the sake of all, the ones who really are startin to edit things. All i can say, is that titan gives a kernel panic on startup, " got to restart youre ...etc", natit gives me the black and white with geforce and rest, maybe iエm editing something wrong ;) , dunkno... :)
So if you put that for general info would be great.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy