Jump to content

Intel Wireless driver


jalavoui
 Share

3,992 posts in this topic

Recommended Posts

Guest bikedude880

My main question is this: Are you trying to have it use Apples wireless networking kext (hard/not documented) or Apples wired kext (easier/well documented/needs a custom interface for setting it up). Whatever path you take, good luck. This is one hell of a project to be working on.

Link to comment
Share on other sites

Doesn't work with 10.4.8 kernel (SSE2 B6) and 10.4.8 extensions. It detect 2200BG card but makes panic talking about dependencies.

 

Can you code this with 8.8.1 kernel and 10.4.8 extensions dependencies, a lot of people have this config now I think.

 

Any way I'll reinstall a new OSx86 this WE and tried this again.

 

Will tell you.

Link to comment
Share on other sites

This is the furthest anyone has gotten with this, is it not? Sorry if I'm wrong...

 

...Keep up the hard work. Doesn't REALLY affect me anymore, I've changed my card anyway, but it DOES affect a TON of current AND future users. Great project.

Link to comment
Share on other sites

this load ok on my laptop and i got a new network port detected (Airport) under Network (System Preferences).

sadly, i can't connect to our unsecured wifi here at the office.

to double-check our wifi network is working, i reboot the same laptop under vista and was able to connect from there.

i think this is pretty close but i do experience a hard lockup.

anyway, thanks for giving us hope :(

 

my hackintosh:

acer travelmate 2420

p-m 740 (1.73ghz, sse2)

intel gma900 (qe(2d)/ci/opengl)

osx 10.4.8 (almost pure apple w/ semthex 8.8.1 beta9 exp6 sse2 kernel)

Link to comment
Share on other sites

my log :

Dec 30 11:46:34 darren-lais-computer kernel[0]: scanning...

Dec 30 11:46:34 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:34 darren-lais-computer kernel[0]: IPW_INTA_BIT_RX_TRANSFER)

Dec 30 11:46:34 darren-lais-computer kernel[0]: RxQueueIntr: hw 3 (3) -> 2

Dec 30 11:46:34 darren-lais-computer kernel[0]: Packet: type=03 seq=00 bits=00

Dec 30 11:46:34 darren-lais-computer kernel[0]: Notification: subtype=0D flags=A0 size=4

Dec 30 11:46:34 darren-lais-computer kernel[0]: type = i (13 bytes)

Dec 30 11:46:34 darren-lais-computer kernel[0]: Scan completed: type 0, 0 channels, 1 status

Dec 30 11:46:34 darren-lais-computer kernel[0]: associate...

Dec 30 11:46:34 darren-lais-computer kernel[0]: no network found

Dec 30 11:46:37 darren-lais-computer kernel[0]: scanning...

Dec 30 11:46:37 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:37 darren-lais-computer kernel[0]: IPW_INTA_BIT_RX_TRANSFER)

Dec 30 11:46:37 darren-lais-computer kernel[0]: RxQueueIntr: hw 4 (4) -> 3

Dec 30 11:46:37 darren-lais-computer kernel[0]: Packet: type=03 seq=00 bits=00

Dec 30 11:46:37 darren-lais-computer kernel[0]: Notification: subtype=0D flags=A0 size=4

Dec 30 11:46:37 darren-lais-computer kernel[0]: type = i (13 bytes)

Dec 30 11:46:37 darren-lais-computer kernel[0]: Scan completed: type 0, 0 channels, 1 status

Dec 30 11:46:37 darren-lais-computer kernel[0]: associate...

Dec 30 11:46:37 darren-lais-computer kernel[0]: no network found

Dec 30 11:46:40 darren-lais-computer kernel[0]: scanning...

Dec 30 11:46:40 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:40 darren-lais-computer kernel[0]: IPW_INTA_BIT_RX_TRANSFER)

Dec 30 11:46:40 darren-lais-computer kernel[0]: RxQueueIntr: hw 5 (5) -> 4

Dec 30 11:46:40 darren-lais-computer kernel[0]: Packet: type=03 seq=00 bits=00

Dec 30 11:46:40 darren-lais-computer kernel[0]: Notification: subtype=0D flags=A0 size=4

Dec 30 11:46:40 darren-lais-computer kernel[0]: type = i (13 bytes)

Dec 30 11:46:40 darren-lais-computer kernel[0]: Scan completed: type 0, 0 channels, 1 status

Dec 30 11:46:40 darren-lais-computer kernel[0]: associate...

Dec 30 11:46:40 darren-lais-computer kernel[0]: no network found

Dec 30 11:46:43 darren-lais-computer kernel[0]: scanning...

Dec 30 11:46:43 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:43 darren-lais-computer kernel[0]: IPW_INTA_BIT_RX_TRANSFER)

Dec 30 11:46:43 darren-lais-computer kernel[0]: RxQueueIntr: hw 6 (6) -> 5

Dec 30 11:46:43 darren-lais-computer kernel[0]: Packet: type=03 seq=00 bits=00

Dec 30 11:46:43 darren-lais-computer kernel[0]: Notification: subtype=0D flags=A0 size=4

Dec 30 11:46:43 darren-lais-computer kernel[0]: type = i (13 bytes)

Dec 30 11:46:43 darren-lais-computer kernel[0]: Scan completed: type 0, 0 channels, 1 status

Dec 30 11:46:43 darren-lais-computer kernel[0]: associate...

Dec 30 11:46:43 darren-lais-computer kernel[0]: no network found

Dec 30 11:46:46 darren-lais-computer kernel[0]: scanning...

Dec 30 11:46:46 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:46 darren-lais-computer kernel[0]: IPW_INTA_BIT_RX_TRANSFER)

Dec 30 11:46:46 darren-lais-computer kernel[0]: RxQueueIntr: hw 7 (7) -> 6

Dec 30 11:46:46 darren-lais-computer kernel[0]: Packet: type=03 seq=00 bits=00

Dec 30 11:46:46 darren-lais-computer kernel[0]: Notification: subtype=0D flags=A0 size=4

Dec 30 11:46:46 darren-lais-computer kernel[0]: type = i (13 bytes)

Dec 30 11:46:46 darren-lais-computer kernel[0]: Scan completed: type 0, 0 channels, 1 status

Dec 30 11:46:46 darren-lais-computer kernel[0]: associate...

Dec 30 11:46:46 darren-lais-computer kernel[0]: no network found

Dec 30 11:46:49 darren-lais-computer kernel[0]: scanning...

Dec 30 11:46:49 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:49 darren-lais-computer kernel[0]: IPW_INTA_BIT_RX_TRANSFER)

Dec 30 11:46:49 darren-lais-computer kernel[0]: RxQueueIntr: hw 8 (8) -> 7

Dec 30 11:46:49 darren-lais-computer kernel[0]: Packet: type=03 seq=00 bits=00

Dec 30 11:46:49 darren-lais-computer kernel[0]: Notification: subtype=0D flags=A0 size=4

Dec 30 11:46:49 darren-lais-computer kernel[0]: type = i (13 bytes)

Dec 30 11:46:49 darren-lais-computer kernel[0]: Scan completed: type 0, 0 channels, 1 status

Dec 30 11:46:49 darren-lais-computer kernel[0]: associate...

Dec 30 11:46:49 darren-lais-computer kernel[0]: no network found

Dec 30 11:46:52 darren-lais-computer kernel[0]: scanning...

Dec 30 11:46:52 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:52 darren-lais-computer kernel[0]: IPW_INTA_BIT_RX_TRANSFER)

Dec 30 11:46:52 darren-lais-computer kernel[0]: RxQueueIntr: hw 9 (9) -> 8

Dec 30 11:46:52 darren-lais-computer kernel[0]: Packet: type=03 seq=00 bits=00

Dec 30 11:46:52 darren-lais-computer kernel[0]: Notification: subtype=0D flags=A0 size=4

Dec 30 11:46:52 darren-lais-computer kernel[0]: type = i (13 bytes)

Dec 30 11:46:52 darren-lais-computer kernel[0]: Scan completed: type 0, 0 channels, 1 status

Dec 30 11:46:52 darren-lais-computer kernel[0]: associate...

Dec 30 11:46:52 darren-lais-computer kernel[0]: no network found

Dec 30 11:46:55 darren-lais-computer kernel[0]: scanning...

Dec 30 11:46:55 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:55 darren-lais-computer kernel[0]: Firmware error detected. Restarting.

Dec 30 11:46:55 darren-lais-computer kernel[0]: ipw_adapter_restart

Dec 30 11:46:55 darren-lais-computer kernel[0]: getPOWER 1, 1 0 0 0

Dec 30 11:46:55 darren-lais-computer kernel[0]: IPW_INTA_BIT_FW_INITIALIZATION_DONE)

Dec 30 11:46:55 darren-lais-computer kernel[0]: darwin_iwi2200: Interrupt::Firmware successfully loaded and initialized

Dec 30 11:46:55 darren-lais-computer kernel[0]: device failed to boot initial fw image

Dec 30 11:46:55 darren-lais-computer kernel[0]: boot firmware ok

Dec 30 11:46:55 darren-lais-computer kernel[0]: darwin_iwi2200: Microcode OK, rev. 53594 (0xd15a) dev. 3 (0x3) of 11/22/04 20:27

Dec 30 11:46:55 darren-lais-computer kernel[0]: bss firmware ok

Dec 30 11:46:55 darren-lais-computer kernel[0]: Writing EEPROM data into SRAM

Dec 30 11:46:55 darren-lais-computer kernel[0]: geography 9 = ZZR

Dec 30 11:46:55 darren-lais-computer kernel[0]: Setting MAC address to 00:15:00:4f:b0:ee

Dec 30 11:46:55 darren-lais-computer kernel[0]: Configuring adapter

Dec 30 11:46:55 darren-lais-computer kernel[0]: Setting RTS threshold to 2304

Dec 30 11:46:55 darren-lais-computer kernel[0]: Setting IPW_CMD_SEED_NUMBER to 305419896

Dec 30 11:46:55 darren-lais-computer kernel[0]: Setting IPW_CMD_HOST_COMPLETE

Dec 30 11:46:55 darren-lais-computer kernel[0]: Configured device on count 2

Dec 30 11:46:55 darren-lais-computer kernel[0]: scanning...

Dec 30 11:46:55 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:55 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:55 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:55 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:55 darren-lais-computer kernel[0]: IPW_INTA_BIT_RX_TRANSFER)

Dec 30 11:46:55 darren-lais-computer kernel[0]: RxQueueIntr: hw 1 (1) -> 0

Dec 30 11:46:55 darren-lais-computer kernel[0]: Packet: type=03 seq=00 bits=00

Dec 30 11:46:55 darren-lais-computer kernel[0]: Notification: subtype=14 flags=A0 size=104

Dec 30 11:46:55 darren-lais-computer kernel[0]: type = i (20 bytes)

Dec 30 11:46:55 darren-lais-computer kernel[0]: TODO: Calibration

Dec 30 11:46:55 darren-lais-computer kernel[0]: IPW_INTA_BIT_RX_TRANSFER)

Dec 30 11:46:55 darren-lais-computer kernel[0]: RxQueueIntr: hw 2 (2) -> 1

Dec 30 11:46:55 darren-lais-computer kernel[0]: Packet: type=03 seq=00 bits=00

Dec 30 11:46:55 darren-lais-computer kernel[0]: Notification: subtype=0D flags=A0 size=4

Dec 30 11:46:55 darren-lais-computer kernel[0]: type = i (13 bytes)

Dec 30 11:46:55 darren-lais-computer kernel[0]: Scan completed: type 0, 0 channels, 1 status

Dec 30 11:46:55 darren-lais-computer kernel[0]: associate...

Dec 30 11:46:55 darren-lais-computer kernel[0]: no network found

Dec 30 11:46:58 darren-lais-computer kernel[0]: scanning...

Dec 30 11:46:58 darren-lais-computer kernel[0]: IPW_INTA_BIT_TX_CMD_QUEUE)

Dec 30 11:46:58 darren-lais-computer kernel[0]: IPW_INTA_BIT_RX_TRANSFER)

Dec 30 11:46:58 darren-lais-computer kernel[0]: RxQueueIntr: hw 3 (3) -> 2

Dec 30 11:46:58 darren-lais-computer kernel[0]: Packet: type=03 seq=00 bits=00

Dec 30 11:46:58 darren-lais-computer kernel[0]: Notification: subtype=0D flags=A0 size=4

Dec 30 11:46:58 darren-lais-computer kernel[0]: type = i (13 bytes)

Dec 30 11:46:58 darren-lais-computer kernel[0]: Scan completed: type 0, 0 channels, 1 status

Dec 30 11:46:58 darren-lais-computer kernel[0]: associate...

Dec 30 11:46:58 darren-lais-computer kernel[0]: no network found

 

 

my spec

HP dv4318

Intel Centrino + 2Gb ram

OSx 10.4.8 ( 10.4.4 kernel )

 

my wireless network setup

1. belkin router

2. linksys router

 

another error show in log

Dec 30 11:51:04 darren-lais-computer kernel[0]: kAirPortSwitchWepNetwork: terminating supplicant!

 

thanks for your effort..

Edited by kinwah.lai
Link to comment
Share on other sites

Guest bikedude880

Little install guide to help out:

 

  1. Unzip it
  2. Drag it to /System/Library/Extensions/
  3. Open up a terminal and type:
    cd /System/Library/Extensions/


    sudo chown -R root:wheel iwi2200.kext


    sudo chmod -R 755 iwi2200.kext


  4. Delete /System/Library/Extensions.mkext and /System/Library/Extensions.kextcache
  5. Reboot, hope it works...

Link to comment
Share on other sites

just a report, its fun to see your wireless icon blink on your laptop, but this is far from complete....

 

great to jus try once, but it WILL lockup your system if u use it long term... (i had mine lock up many times already)

 

it works on a 10.4.8 system, but you have to first get your pcmcia driver working first, and it can be found somewhere on this site....

 

cannot connect to any single network, even open ones... cannot detect and scan and list in the airport menu... changing some settings causes a system wide lockdown....

 

i think there are many issues to be resolved here, other than jus porting.... but great work!!!!! got my hope flame burning again even since i got a usb wireless adaptor....

Link to comment
Share on other sites

and for all you noobers out that who borked your system installing this and cant get it up and running again, just do the following:

 

1. boot in single user mode with -s flag

2. type /sbin/mount -uw / at prompt

3. then type rm -R /System/Library/Extentions/iwi2200.kext

4. reboot and you should be back to normal

Link to comment
Share on other sites

and for all you noobers out that who borked your system installing this and cant get it up and running again, just do the following:

 

1. boot in single user mode with -s flag

2. type /sbin/mount -uw / at prompt

3. then type rm -R /System/Library/Extentions/iwi2200.kext

4. reboot and you should be back to normal

 

When I will do this the driver is deleted and my Intel 2200 card wont be detected by the system?

But I wont the card to be detected, and at this moment it is, but it isn't working. I can't connect with any network.

Is there a solution for this problem?

 

Thanx

Link to comment
Share on other sites

This driver is still an "alpha" type release. No one in the thread reports it to be fully working. Only that the card is recognized but won't connect.

 

I'm afraid you will need to wait for another release of the driver to hopefully get one that connects.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...