Siegfried Posted October 2, 2007 Share Posted October 2, 2007 EDIT 10-01-2007: Just wanted to let everyone know that these kexts work perfectly under 10.4.10 using the 8.9.1 kernel. I would imagine they work on the 8.10.3 kernel also, but i am not running that one because i need speedstep support. Enjoy all! Slightly off topic, but which 8.9.1 kernel are you using that supports speedstep? Link to comment Share on other sites More sharing options...
glitchman Posted October 4, 2007 Author Share Posted October 4, 2007 Slightly off topic, but which 8.9.1 kernel are you using that supports speedstep? i am using the kernel that came with the installer found at http://www.macdotnub.info/downloads.php. I believe it is the netkas kernel. Link to comment Share on other sites More sharing options...
flowinglight Posted October 14, 2007 Share Posted October 14, 2007 God Thanks!!! Now I can use my Huawei PCMCIA CDMA1x EC321 now!!! Link to comment Share on other sites More sharing options...
PaDla Posted November 7, 2007 Share Posted November 7, 2007 Hi guys!! Please help me with my trouble... I install kext file by guide, but my PCMCIA card won't work;( I replaced all files from archives in /System/Library/Extensions/ Repair permissons, reboot and nothing... It's my log from terminal: pavel-binkins-computer:~ pavelbinkin$ sudo dmesg | grep PC<BR>Password:<BR>LPC Bridge Vendor ID 0x8086, Device ID 0x2641<BR>AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled<BR>IOPCCard info: Intel PCIC probe: not found.<BR>IOPCCardBridge::start failed<BR>FireWire (OHCI) TI ID 8032 PCI now active, GUID 06e40a006d285001; max speed s400.<BR>Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/USB7@1D,7/AppleUSBEHCI/HTS548040M9AT00 @fd500000/IOUSBInterface@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorageServices/IOBlockStorageDriver/Initio HTS548040M9AT00 Media/IOFDiskPartitionScheme/Untitled 1@1 Ispci -v : CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller<BR> Subsystem: Hewlett-Packard Company Unknown device 309d<BR> Flags: bus master, medium devsel, latency 168, IRQ 17<BR> Memory at b0107000 (32-bit, non-prefetchable) [size=4K]<BR> Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176<BR> Memory window 0: 88000000-8bfff000 (prefetchable)<BR> Memory window 1: 90000000-93fff000<BR> I/O window 0: 00003400-000034ff<BR> I/O window 1: 00003800-000038ff<BR> 16-bit legacy interface ports at 0001 How can i install my Pc card? My laptop is HP Pavilion dv4000, PCMCI - TI xx21, OSX uphuck 1.4.9. Please, help me... THX. Link to comment Share on other sites More sharing options...
macao Posted November 8, 2007 Share Posted November 8, 2007 I followed the steps and went smoothly without errors. One thing I noticed that an icon near the digital clock suddenly appeared. When I click it, I saw a greyed text with the model name and brand of my PCMCIA Card. By the way I have a 3COM 3CRPAG175 Wireless Lan Card. There also an option there "Power off Card". Is that indicates that i made my wireless card working? When I go to my Network Settings, I didn't see my Wireless Card there.. Please someone help me... Thanks Link to comment Share on other sites More sharing options...
BuXb Posted November 20, 2007 Share Posted November 20, 2007 the kext still work 100% in Leo .. If you boot via Netka's EFI loader, in your PCCard kext plist exchange ADPI2,1 with Mac .. Link to comment Share on other sites More sharing options...
fingerr Posted November 26, 2007 Share Posted November 26, 2007 the kext still work 100% in Leo .. If you boot via Netka's EFI loader, in your PCCard kext plist exchange ADPI2,1 with Mac .. Hi Bugs, long time no see I'd like to ask you which kext works for you under Leo? I tried some of them and finally get my card recognized, but I lost my broadcom WiFi. Is there any way to patch original 10.5.1 kexts (IOPCIFamily & IOPCCard) to make it work ? (my device is VEN 104C DEV 8039) Thanks in advance and best regards! Link to comment Share on other sites More sharing options...
im_Zer0 Posted November 26, 2007 Share Posted November 26, 2007 hi im running kernel 8.10.1 heres what i did copy the files fix permissions delete cache restart and get a panic screen any advice? Link to comment Share on other sites More sharing options...
str8edgepunker Posted November 27, 2007 Share Posted November 27, 2007 Just wanted to thank you for this, it works great on my Dell Latitude C840 with a Texas Instruments PCI-4451 carbus controller. I upgraded my OS to 10.4.11 from the xXx 10.4.10 cd and it still works great. Also, this fixed a weird diskarb problem I was having at startup so again, thanks! Link to comment Share on other sites More sharing options...
maytagman Posted November 30, 2007 Share Posted November 30, 2007 I tried these on the kaly 10.4.10 and worked great but there seemed to be conflicts between something and the atheros drivers. Just converted kaly to ChaOSX86 and these kexts give kernel panics. BOO i want my TIxx12 Uphuck 10.4.9 is hopefully done downloading soon. Link to comment Share on other sites More sharing options...
maytagman Posted November 30, 2007 Share Posted November 30, 2007 OK it seems to me that atheros pcmcia is NOT compatible with 10.4.10 using these kexts for pcmcia. results in 391 cpp error, 10.4.8 results in 445 cpp error... I've tried two distros. NEED glitchman kexts to make PCMCIA work with 10.4.10 and no version of IO80211Family.kext works woth 'em. Tested 10.4.5, 10.4.6, 10.4.8, 10.4.10, 10.5.1 WG511T ar5212. Is it possible for me to compile my own? Link to comment Share on other sites More sharing options...
snam11 Posted January 4, 2008 Share Posted January 4, 2008 thnx glitchman!!!!! i've finally made it! installed whole kext set (only iopci and iopccardnetwork is not enough) and i've edited kext using hexedit. my o2micro OZ711MP1/MS1 MemoryCardBus Controller (1217:7134) works flawlessly. i've tested a cardreader, a firewire800 and a wifi card. regards Link to comment Share on other sites More sharing options...
bestman50 Posted January 21, 2008 Share Posted January 21, 2008 Glitchman can you tell me which cardbus you have? Mine is the TI PCIxx12, tried once to fix this and crashed the OS. thx bestman50 Link to comment Share on other sites More sharing options...
raytje192 Posted February 5, 2008 Share Posted February 5, 2008 Hi guys, Great work on this, works perfect on my Dell Latitude d600, got wirless now with wpc54g from linksys. Running OSX all the time now, no windows for me anymore Trying to install at my friends Packard Bell notebook right now but it isn't working, where in de IOPCIFamily.kext do i need to change the Device ID? Can someone give me a guide on this? And how do i find the device id, can i find that in windows somewhere? Again, great work! :censored2: Link to comment Share on other sites More sharing options...
joecas Posted March 6, 2008 Share Posted March 6, 2008 I have a Toshiba Satellite 5100-501 with osx 10.4.7 i installed all the kexts from this thread... This is the dmesg result: IOPCCard info: Intel PCIC probe: IOPCCard notice: Bad bridge mapping at 0xfce01000! IOPCCardBridge:: start failed IOPCCard info: Intel PCIC probe: IOPCCard notice: Bad bridge mapping at 0xfce00000! IOPCCardBridge::start failed Could someone help me ? Link to comment Share on other sites More sharing options...
jet73 Posted March 20, 2008 Share Posted March 20, 2008 thank. works on nc6000 laptop. pickup the controller as Oz711M3 rev 00. it now picks up my PCMCIA cards. just need to find the kext for the card itself now. Link to comment Share on other sites More sharing options...
divineSeeker Posted March 20, 2008 Share Posted March 20, 2008 installed whole kext set (only iopci and iopccardnetwork is not enough) and i've edited kext using hexedit. my o2micro OZ711MP1/MS1 MemoryCardBus Controller (1217:7134) works flawlessly. i've tested a cardreader, a firewire800 and a wifi card. Hello, I'm looking at the Info.plist file, and it isn't obvious at all to me where to put the vendor:id string. The closest line I can see looks like this: <key>IOPCIClassMatch</key> <string>0x06070000</string> I have the same Cardbus controller as you - where do I put what values, please? Is '0x06070000' replaced by '0x12177134', or ? Thanks, divineSeeker Link to comment Share on other sites More sharing options...
Recommended Posts