Flip_5 Posted February 19, 2018 Share Posted February 19, 2018 This is my first hackintosh attempt, so I'm new to the whole process, and kindof new to mac products in general. That being said, I've managed to install OSX High Sierra (and W10 dual boot through Clover), and have it up and running, except ethernet, wifi/BT and USB 3.0. I switched out my Intel Wifi/BT card for a Broadcom BCM94352 prior to beginning the install, but have been unable to get it working, works fine in Windows 10. I've tried a few different walkthroughs I've found on the web, but nothing seems to work. I also cannot get the Intel ethernet working (I219-LM). I'm sure it's all something simple I'm overlooking, but I'm not sure where to start. Once I get internet working I'll start checking optional stuff like camera, thunderbolt ports, HDMI, fingerprint etc... Thanks in advance! Flip Intel i7-7600U Intel HD620 14" OLED 2560x1440 touchscreen 16Gb RAM 1Tb Samsung EVO 960 NVMe (EFI, Windows, OSX partitions) 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted February 19, 2018 Share Posted February 19, 2018 This is my first hackintosh attempt, so I'm new to the whole process, and kindof new to mac products in general. That being said, I've managed to install OSX High Sierra (and W10 dual boot through Clover), and have it up and running, except ethernet, wifi/BT and USB 3.0. I switched out my Intel Wifi/BT card for a Broadcom BCM94352 prior to beginning the install, but have been unable to get it working, works fine in Windows 10. I've tried a few different walkthroughs I've found on the web, but nothing seems to work. I also cannot get the Intel ethernet working (I219-LM). I'm sure it's all something simple I'm overlooking, but I'm not sure where to start. Once I get internet working I'll start checking optional stuff like camera, thunderbolt ports, HDMI, fingerprint etc... Thanks in advance! Flip Intel i7-7600U Intel HD620 14" OLED 2560x1440 touchscreen 16Gb RAM 1Tb Samsung EVO 960 NVMe (EFI, Windows, OSX partitions) Welcome, Please post your CLOVER folder minus themes and serial numbers, ill take a look. 3 Link to comment Share on other sites More sharing options...
Flip_5 Posted February 19, 2018 Author Share Posted February 19, 2018 Thanks for the quick reply. Here's my CLOVER folder. CLOVER.zip 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted February 19, 2018 Share Posted February 19, 2018 Thanks for the quick reply. Here's my CLOVER folder. Which config,plist are you trying to use? I dont have NVME but are all those patches necessary? 2 Link to comment Share on other sites More sharing options...
Flip_5 Posted February 19, 2018 Author Share Posted February 19, 2018 The regular "config.plist"... I think... 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted February 19, 2018 Share Posted February 19, 2018 The regular "config.plist"... I think... Try this one Should hopefully have wifi / bluetooth and ethernet. From what i can find your audio chip is Conexant CX11771 which has no support from AppleALC (yet) so you may want to jump into that topic and get some help from the guys. Source: https://github.com/vit9696/AppleALC/wiki/Supported-codecs Topic: http://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/ 2 Link to comment Share on other sites More sharing options...
Flip_5 Posted February 19, 2018 Author Share Posted February 19, 2018 No good, Progress bar gets halfway and computer reboots. Verbose screenshots attached as best as I could take them. Audio seems to be working fine. Although I haven't done major testing yet, as I wanted to get internet up first. VerboseScreenshots.zip 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted February 19, 2018 Share Posted February 19, 2018 No good, Progress bar gets halfway and computer reboots. Verbose screenshots attached as best as I could take them. Audio seems to be working fine. Although I haven't done major testing yet, as I wanted to get internet up first. Ok what about this one? CLOVER.zip I'm glad audio is working fine. If that folder is a no go try just replacing this config.plist. config.plist.zip 2 Link to comment Share on other sites More sharing options...
Flip_5 Posted February 19, 2018 Author Share Posted February 19, 2018 Nope, reboots at same spot. 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted February 19, 2018 Share Posted February 19, 2018 Nope, reboots at same spot. ok use my clover folder but your config.plist and try boot. If that fails try this. CLOVER.zip 2 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 19, 2018 Share Posted February 19, 2018 Samsung EVO 960 NVMe have a native support in High Sierra, dont need any patch if u can boot into system, run it and extract all necessary files for ppl help u RunMe.app.zip 2 Link to comment Share on other sites More sharing options...
SavageAUS Posted February 19, 2018 Share Posted February 19, 2018 Samsung EVO 960 NVMe have a native support in High Sierra, dont need any patch if u can boot into system, run it and extract all necessary files for ppl help u RunMe.app.zip Which smbios would be best for his system? MacBookPro14,3 ? 2 Link to comment Share on other sites More sharing options...
Flip_5 Posted February 19, 2018 Author Share Posted February 19, 2018 Samsung EVO 960 NVMe have a native support in High Sierra, dont need any patch if u can boot into system, run it and extract all necessary files for ppl help u RunMe.app.zip The latest CLOVER folder boots but still no wifi/ethernet. It's definitely an improvement in the boot time though, very quick to boot. Send me Mikegadzinskis-MacBook-Air.zip 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted February 19, 2018 Share Posted February 19, 2018 The latest CLOVER folder boots but still no wifi/ethernet. It's definitely an improvement in the boot time though, very quick to boot. Are you using the latest config.plist i uploaded? Your bootlog still shows you using all the nvme patches and you gave to .plist config.plist and config_HD520_530_540.plist << remove You dont need OsxAptioFixDrv-64.efi and OsxAptioFix2Drv-64.efi, try using OsxAptioFix3Drv-64.efi as i used in the last clover folder i uploaded. Are you putting these files on USB and booting from that on in your HDD EFI? 2 Link to comment Share on other sites More sharing options...
Flip_5 Posted February 19, 2018 Author Share Posted February 19, 2018 ok use my clover folder but your config.plist and try boot. If that fails try this. CLOVER.zip I copied this CLOVER folder to the EFI partition on the NVMe Drive and boot from there. I reran the runme.app here's the output. Send me Mikegadzinskis-MacBook-Air.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 19, 2018 Share Posted February 19, 2018 if u can try... CLOVER.zip 1 Link to comment Share on other sites More sharing options...
Flip_5 Posted February 19, 2018 Author Share Posted February 19, 2018 if u can try... CLOVER.zip OK, some progress, but still not working, I now show Ethernet under my networking, but it cycles between Cable Unplugged and Not connected. (Tried a 2nd known good cable for good measure) Looks, like it's not pulling an IP address. WiFi still not showing at all. Send me Mikegadzinskis-MacBook-Air.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 19, 2018 Share Posted February 19, 2018 u have a kext collection, u can use all necessary kexts in Clover/Kexts/Other, if some don't work there, use Library/Extensions, just for avoid problems CLOVER.zip remove kexts /System/Library/Extensions/IntelMausiEthernet.kext NullCPUPowerManagement VoodooHDA AppleHdaDisable 1 Link to comment Share on other sites More sharing options...
Flip_5 Posted February 19, 2018 Author Share Posted February 19, 2018 Still no good. Send me MikegadnskisAir.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 19, 2018 Share Posted February 19, 2018 use a fresh install, after install system, install clover and repolace clover folder, now u have video, PM, etc U remove AppleHda? use a clean system and avoid problem, need check if ur LAN have support in kext 1 Link to comment Share on other sites More sharing options...
Flip_5 Posted February 19, 2018 Author Share Posted February 19, 2018 OK, so the reinstall did the trick. I was asked for wifi credentials during setup, and everything looks good now! Thanks so much both of you for all your help! Link to comment Share on other sites More sharing options...
MaLd0n Posted February 20, 2018 Share Posted February 20, 2018 test sleep, brighntness, battery, power management, i apply all into DSDT send me one ioreg IORegistryExplorer.app.zip 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted February 20, 2018 Share Posted February 20, 2018 OK, so the reinstall did the trick. I was asked for wifi credentials during setup, and everything looks good now! Thanks so much both of you for all your help!We do our best to help everyone. But yes as maldon said test everything, and now I can see why your sound was working, you had voodoohda installed.Does WiFi work with 2.4 and 5g? Bluetooth? Also as said 90% of kexts can stay in EFI and only install ones to Library/Extensions that won't load. Is speedstep working? Sent from my SM-G930F using Tapatalk 1 Link to comment Share on other sites More sharing options...
Flip_5 Posted February 20, 2018 Author Share Posted February 20, 2018 So here's what I found that's not working yet: Ethernet (Partially working, shows under Network properties, but does not connect) Brightness USB-C/Thunderbolt ports (Except for charging laptop) HDMI (Partially works, Laptop screen turns off when HDMI connected, does not turn back on when HDMI disconnected) 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted February 20, 2018 Share Posted February 20, 2018 So here's what I found that's not working yet: Ethernet (Partially working, shows under Network properties, but does not connect) Brightness USB-C/Thunderbolt ports (Except for charging laptop) HDMI (Partially works, Laptop screen turns off when HDMI connected, does not turn back on when HDMI disconnected) For brightness try adding this to your EFI > CLOVER > ACPI > Patched folder And in config.plist add SSDT-PNLF.aml to sorted order. Reboot and test. SSDT-PNLF.aml.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts