iamcarlito Posted February 8, 2018 Share Posted February 8, 2018 Hey everyone, I have a good stable Hackintosh for 1 week now. Here's my hack: CPU - Intel Core i7-8700K 3.7GHz 6-Core Processor CPU Cooler - be quiet! - Dark Rock Pro 3 Motherboard - Asus ROG STRIX Z370-E GAMING Memory - G-Skillz 32GB (2 x 16GB) DDR4-2801 Storage - Samsung 960 EVO 500GB M.2-2280 Solid State Drive Video Card - Asus GeForce GTX 1080 Ti 11GB STRIX GAMING Case - Thermaltake Core X71 Tempered Glass Edition ATX Full Tower Case Power Supply - EVGA SuperNOVA P2 850W 80+ Platinum Monitor - Dell P2715Q 27.0" + Dell SE2417HG 23.5" What works: Sleep/Wake Bluetooth Audio Ethernet iMessage App Store Itunes Video What doesn't work or works weirdly: Black display (when connect to GPU display port) when booting. wake up only just before the login. It was the Dell P2715Q. This monitor have several troubles when it's time to use the display port. Seems almost a common issue with that monitor though. If you want more detail please visit this post. GPU I bit laggy, for exemple when I scroll in photoshop. Ui lag (Chrome and finder) Usb mapping (I'm using a USBinjectALL.kext without Custom Flags uia_exclude) Kext: AppleALC CodecCommander FakeSMC_ACPISensors FakeSMC_CPUSensors FakeSMC_LPCSensors FakeSMC IntelGraphicsFixup IntelMausiEthernet Lilu NvidiaGraphicFixup SATA-200-series-unsupported Shiki USBInjectAll XHCI-200-series-injector I want to know if someone can gives me tips and tricks to get my build work flawlessly. Thanks guys EDIT: @MaLd0n run.me app file I get Send me Carls-iMac.zip Link to comment Share on other sites More sharing options...
maleorderbride Posted February 8, 2018 Share Posted February 8, 2018 For the black display until desktop loads, it sounds like you left the iGPU as primary in the BIOS. Just change that to the PCI-e GPU. 10.13 is a bit laggy with the current web drivers I think. You can disable hardware acceleration in Chrome and see if that helps, as well as disable OpenGL acceleration in PS. I think some have had success reducing lag by rolling back the nvidia driver to older versions. As for the USB, there are plenty of guides (and it sounds like you are aware of them), so you just have to do it. Link to comment Share on other sites More sharing options...
iamcarlito Posted February 8, 2018 Author Share Posted February 8, 2018 For the black display until desktop loads, it sounds like you left the iGPU as primary in the BIOS. Just change that to the PCI-e GPU. Here's my Bios Setting: Primary Display: PCIE IGPU Multi-Monitor: Enable RC6: Enabled DVMT Pre-Allocated: 192M I've try without success: Primary Display: PCIE IGPU Multi-Monitor: Disable RC6: Disable DVMT Pre-Allocated: 192M The only work around is to use the both HDMI output for my screens. But my P2715Q with HDMI does 30Hz. If I could make the display port working it will be at 60Hz. Any idea? Link to comment Share on other sites More sharing options...
maleorderbride Posted February 8, 2018 Share Posted February 8, 2018 Here's my Bios Setting: Primary Display: PCIE IGPU Multi-Monitor: Enable RC6: Enabled DVMT Pre-Allocated: 192M I've try without success: Primary Display: PCIE IGPU Multi-Monitor: Disable RC6: Disable DVMT Pre-Allocated: 192M The only work around is to use the both HDMI output for my screens. But my P2715Q with HDMI does 30Hz. If I could make the display port working it will be at 60Hz. Any idea? You have two DP ports on your video card. Did you try both to see if that shows the boot screen? You might try Disabling CSM as well, if it is Enabled. Link to comment Share on other sites More sharing options...
iamcarlito Posted February 8, 2018 Author Share Posted February 8, 2018 You have two DP ports on your video card. Did you try both to see if that shows the boot screen? You might try Disabling CSM as well, if it is Enabled. I've try both DP ports, and the screens are Black at booting. I've disable CSM as well. I've seen in the CSM if it's Enable, something like Boot Pci-e with the option legacy or UEFI do you think it could work or it will do nothing? I'm a bit noob with hackintosh. Link to comment Share on other sites More sharing options...
maleorderbride Posted February 9, 2018 Share Posted February 9, 2018 I don't think booting with legacy will do anything for you here. Do you see the startup screens if you disable the IGPU completely? If not, then perhaps you should start looking at your monitor settings. Link to comment Share on other sites More sharing options...
iamcarlito Posted February 9, 2018 Author Share Posted February 9, 2018 I’ve try the monitor settings without success again... and dp ports don’t work but HDMI work i’ll leave it as it us for now. Hopefully someone will find out anytime soon! Link to comment Share on other sites More sharing options...
iamcarlito Posted February 9, 2018 Author Share Posted February 9, 2018 I’ve try the monitor settings without success again... and dp ports don’t work but HDMI work i’ll leave it as it us for now. Hopefully someone will find out anytime soon! I've finally find that is my brand new Monitor. The P2715Q is a troublemaker with displayport. Here's what I found about that: P2715Q I've decided to return this Monitor to replace it with LG one. Thanks for your help, I'll not make this post resolve du to the other little trouble. Link to comment Share on other sites More sharing options...
MaLd0n Posted February 10, 2018 Share Posted February 10, 2018 here CLOVER.zip 1 Link to comment Share on other sites More sharing options...
iamcarlito Posted February 12, 2018 Author Share Posted February 12, 2018 here CLOVER.zip Man thank you so much!! Your help and contribution is really appreciated. Link to comment Share on other sites More sharing options...
iamcarlito Posted February 16, 2018 Author Share Posted February 16, 2018 here CLOVER.zip It's been a week and i could say now that my hack work flawlessly! Thank you Maldon. Link to comment Share on other sites More sharing options...
iamcarlito Posted February 27, 2018 Author Share Posted February 27, 2018 Here's is the send me file with the BCM94360CS2 installed. If you can help me. Send me Carl’s iMac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 27, 2018 Share Posted February 27, 2018 Here's is the send me file with the BCM94360CS2 installed. If you can help me. BluetoothDevBroadcomInjector.kext.zip 1 Link to comment Share on other sites More sharing options...
iamcarlito Posted February 27, 2018 Author Share Posted February 27, 2018 BluetoothDevBroadcomInjector.kext.zip Don't seems to work! Do i have something to change in the config.plist? I've put the kext in my kext/other/ folder. That's it I'm a bit noob sorry. Link to comment Share on other sites More sharing options...
MaLd0n Posted February 27, 2018 Share Posted February 27, 2018 no check here https://bitbucket.org/RehabMan/os-x-brcmpatchram Link to comment Share on other sites More sharing options...
iamcarlito Posted February 27, 2018 Author Share Posted February 27, 2018 no check here https://bitbucket.org/RehabMan/os-x-brcmpatchram Can't find the way to make the bluetooth work. Any ideas? Link to comment Share on other sites More sharing options...
MaLd0n Posted February 27, 2018 Share Posted February 27, 2018 u use 2 kexts? u can use in clover/kexts/other BT 10.12+.zip Link to comment Share on other sites More sharing options...
iamcarlito Posted February 27, 2018 Author Share Posted February 27, 2018 Yes, i've installed those two kext. I see the bluetooth in my system preferences, but it seems to be unable to see bluetooth device. The searching wheel is spinning and doesn't find any devices. Here's another send me file with those 2 kext installed. Thanks a lot for your help it's unvaluable. Send me Carl’s iMac.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted February 27, 2018 Share Posted February 27, 2018 run my new app RunMe.app.zip Link to comment Share on other sites More sharing options...
iamcarlito Posted February 27, 2018 Author Share Posted February 27, 2018 Voila Send me Carls-iMac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted February 27, 2018 Share Posted February 27, 2018 Voila all ok, bro i just apply some more, ut ur valid serial back CLOVER.zip run kextutility for rebuild Kext Utility.app.zip Link to comment Share on other sites More sharing options...
iamcarlito Posted February 27, 2018 Author Share Posted February 27, 2018 Ok good i’ll check that tomorrow morning Link to comment Share on other sites More sharing options...
iamcarlito Posted February 28, 2018 Author Share Posted February 28, 2018 The bluetooth doesn't work, wifi is good. Maybe my brodcom card is broken ( I don't know ). Link to comment Share on other sites More sharing options...
MaLd0n Posted February 28, 2018 Share Posted February 28, 2018 i think no, i think is just a kext inject problem put two kexts in Library/Extensions and run KextUtility one time, reboot Link to comment Share on other sites More sharing options...
iamcarlito Posted February 28, 2018 Author Share Posted February 28, 2018 I put the two kext in Library/Extentions I've run KextUtility and reboot Without success. System/Library/Extentions or Library/Extentions? Link to comment Share on other sites More sharing options...
Recommended Posts