rxm888 Posted January 23, 2018 Share Posted January 23, 2018 i have ended up getting high sierra installed on my intel DQ670w board. i used a premade high sierra/clover dmg i extracted to a usb flash drive. right now the audio, networking arnt working and the video card i have in the machine an nvidia geforce 1050 gtx ti it works but has very very very choppy/jittery video. i did find some kext files for the network and audio but when i put them in the extensions folder they didnt do anything to add audio or networking. also i have to get the machine to boot from the hard drive rather then having to boot the usb flash drive to get the hard drive to boot and i have to work on the video card stuff as well. i am not to good at this stuff cause usually when i have tried stuff i end up breaking stuff or that stuff doesnt work. i am not all that code or certain tech savy. i am not the brightest. i like things laid out where its all like this is the files and where you get them from this is how u work with them kind of thing. it does agravate me when people just wont lay out stuff as like a dummy book does and makes everything easy. i tried on facebook groups and got as far as to be told what kexts to find but never told where to find them. i did try to look on my own and i did find a few kexts but they where ones that needed alterations to the os to even make them usable. the video kext or driver i was told to install it and do something like change something to true. all i need are the kext files and to make the machine boot from the hard drive rather then complaining it doesnt have an os on the drive or having to use the usb flash drive to make it boot and the video files and to know how to deal with the files and make them work without having to start over with everything and reinstalling stuff Link to comment Share on other sites More sharing options...
MaLd0n Posted January 23, 2018 Share Posted January 23, 2018 Check here http://www.insanelymac.com/forum/topic/323052-sierra-on-intel-5-6-7-8-9-and-10-chipset-series Link to comment Share on other sites More sharing options...
rxm888 Posted January 23, 2018 Author Share Posted January 23, 2018 Check here http://www.insanelymac.com/forum/topic/323052-sierra-on-intel-5-6-7-8-9-and-10-chipset-series i have the files that are on your post now i have to figure out how to deal with them. the clover file u have you say install clover first then replace with this one that you have. how am i to do that when i dont have clover in the first place also i need to be able to install the kexts as well but unless i am able to do this stuff i may end up with a system that wont work at all and be back to square one making a new usb installer and such and reinstalling the os and booting from the usb to get the hard drive to work Link to comment Share on other sites More sharing options...
MaLd0n Posted January 24, 2018 Share Posted January 24, 2018 -Install Clover -Replace Folder Link to comment Share on other sites More sharing options...
luki1979 Posted June 2, 2020 Share Posted June 2, 2020 I have that board, it cannot see UEFI partition on the USB stick which is very annoying, In BIOS UEFI is enabled of course. Link to comment Share on other sites More sharing options...
luki1979 Posted June 14, 2020 Share Posted June 14, 2020 I've installed on other machine and moved HD to DQ67OW, it boots with Clover in Legacy mode. Weirdly Bios cannot see UEFI partition but Clover does. Anyway works good. Link to comment Share on other sites More sharing options...
Recommended Posts