magichands Posted December 28, 2017 Share Posted December 28, 2017 Hi all. Can somebody provide any tips on how to fix a sleep issue with my machine? Everything is working perfectly except for sleep. When I put the machine to sleep, the monitors turn off but the machine stays on, fans on full and case LEDs still lit up like the machine is still on. Wriggling the mouse or mashing keys doesn't do anything to "wake" it (I don't think it's actually asleep) and the only way to recover is to do a hard reset. I've been browsing around but I haven't yet seen somebody with the same issue so here we are. Any help would be greatly appreciated. Thanks 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 28, 2017 Share Posted December 28, 2017 Post your full Clover folder Send me tables RunMe.app.zip Send me one Ioreg too IORegistryExplorer.app.zip 1 Link to comment Share on other sites More sharing options...
magichands Posted December 28, 2017 Author Share Posted December 28, 2017 Thanks mate. Attached. CLOVER.zip Nathan’s iMac IOREG.zip Send me Nathan’s iMac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 28, 2017 Share Posted December 28, 2017 Thanks mate. Attached. try replace full folder, reboot CLOVER.zip wake from Power Button 1 Link to comment Share on other sites More sharing options...
magichands Posted December 28, 2017 Author Share Posted December 28, 2017 Dude! Works perfectly!! Can I ask what changes were done so I can help others that might have the same problem? Thanks. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 28, 2017 Share Posted December 28, 2017 I applied a complete solution DSDT -FIX ERRORS AND WARNINGS-HPET-SATA-DMAC-SLPB-DARWIN-LPC-XHCI-PLUGIN TYPE-HDAS to HDEF-HDEF-RTC-IRQs-SBUS-BLC0-BUS1-MCHC-ALS0-SHUTDOWN-LAN-USBX-PMCR-IMEI-EC-PNLF-HDMI U can check other things, cosmetics in AboutThisMac/PCI check ioreg if NATIVE PM work now 2 Link to comment Share on other sites More sharing options...
nephilus Posted December 28, 2017 Share Posted December 28, 2017 Thanks MalD0n of the super quick fix. Could I ask if the fix similar on 10.12? I'm running on haswell and have not unable to get the cpu to sleep for the longest time. Seeing this post renews some hope for my rig. When it goes to sleep, monitors off but cpu, fans, hdds remain on. However, I'm still unable to put it back from "sleep" but tapping any key, a little better than magichands initial situation. I've attached my tables, ioreg, and clover. If you have anytime to spare at all, I would be grateful for your help. Thanks. CLOVER.zip Send me doncharltontan’s iMac.zip doncharltontan’s iMac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 28, 2017 Share Posted December 28, 2017 Thanks MalD0n of the super quick fix. Could I ask if the fix similar on 10.12? I'm running on haswell and have not unable to get the cpu to sleep for the longest time. Seeing this post renews some hope for my rig. When it goes to sleep, monitors off but cpu, fans, hdds remain on. However, I'm still unable to put it back from "sleep" but tapping any key, a little better than magichands initial situation. I've attached my tables, ioreg, and clover. If you have anytime to spare at all, I would be grateful for your help. Thanks. CLOVER.zip many mobos ASRock have hard problems with sleep Remove appleintel1000 kext for lan, use mieze lan kext use only my clover folder with kexts in Clover/Kexts/Other Link to comment Share on other sites More sharing options...
nephilus Posted December 29, 2017 Share Posted December 29, 2017 Hi MaLd0n, I've replaced my kext folder with kexts from your clover folder /other but the result is still the same - system remains awake while display goes to sleep. I am able to get the display to wake with any keyboard/mouse keypress. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 29, 2017 Share Posted December 29, 2017 run in terminal log show --style syslog | fgrep "Wake reason" paste result here send me new ioreg too with new files IORegistryExplorer.app.zip Link to comment Share on other sites More sharing options...
nephilus Posted December 29, 2017 Share Posted December 29, 2017 for the strangest reason, the command was left running for a few min and returned nothing, looks like it can't find what it was looking for. On my macbook, massive amount of logs were returned as the system scan through the logs. My new IOReg is attached. Thanks once again. doncharltontan’s iMac2.zip 1 Link to comment Share on other sites More sharing options...
minxuanzhang Posted December 29, 2017 Share Posted December 29, 2017 Hi MaLd0n, I have problem with "sleep" function too after upgrading the BIOS. I cant figure out what is wrong. Can you please help? thank you! please see attached of my folders. i have removed all kexts to make it fit into size limit Mx's iMac IOReg.zip EFI.zip Send me Mx's iMac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 29, 2017 Share Posted December 29, 2017 for the strangest reason, the command was left running for a few min and returned nothing, looks like it can't find what it was looking for. On my macbook, massive amount of logs were returned as the system scan through the logs. My new IOReg is attached. Thanks once again. where is ioreg? Hi MaLd0n, I have problem with "sleep" function too after upgrading the BIOS. I cant figure out what is wrong. Can you please help? thank you! please see attached of my folders. i have removed all kexts to make it fit into size limit what hardware? Hi MaLd0n, I have problem with "sleep" function too after upgrading the BIOS. I cant figure out what is wrong. Can you please help? thank you! please see attached of my folders. i have removed all kexts to make it fit into size limit replace full folder, dont add nothing, just replace CLOVER.zip check only if u use OsxAptioFixDrv-64.efi or OsxAptioFix2Drv-64.efi test usb without FakePCIID_XHCIMux.kext if u need use only kexts for wifi, FakePCIID_Broadcom_WiFi.kext and FakePCIID.kext send me new ioreg after reboot 1 Link to comment Share on other sites More sharing options...
minxuanzhang Posted December 29, 2017 Share Posted December 29, 2017 where is ioreg? what hardware? replace full folder, dont add nothing, just replace CLOVER.zip check only if u use OsxAptioFixDrv-64.efi or OsxAptioFix2Drv-64.efi test usb without FakePCIID_XHCIMux.kext if u need use only kexts for wifi, FakePCIID_Broadcom_WiFi.kext and FakePCIID.kext send me new ioreg after reboot 4790K @ 4.8Ghz Asus z97i-plus Nv 1060 Hi MaLd0n, Thank you for fixing the DSDT for me. And it works perfectly now. FakePCIID_XHCIMux.kext is needed for my front panel USB to work for some reason. HDMI audio works until i fix 892 again in patch. One more thing, I never had the same performance as Sierra 10.12.6 , Geekbench drops from 19500 to 19000. Cinebench OpenCL drops from 126 to 112? Is it normal for high sierra? MX’s iMac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 29, 2017 Share Posted December 29, 2017 4790K @ 4.8Ghz Asus z97i-plus Nv 1060 Hi MaLd0n, Thank you for fixing the DSDT for me. And it works perfectly now. FakePCIID_XHCIMux.kext is needed for my front panel USB to work for some reason. HDMI audio works until i fix 892 again in patch. One more thing, I never had the same performance as Sierra 10.12.6 , Geekbench drops from 19500 to 19000. Cinebench OpenCL drops from 126 to 112? Is it normal for high sierra? Use this version instead FakePCIID_XHCIMux.kext, if u have other version UsbInjectAll, use it USBInjectAll.kext.zip Many ppl talkin' about it, i dont see any diff in my x99, same performance, Web Driver i prefer for Sierra ioreg is good Link to comment Share on other sites More sharing options...
nephilus Posted December 30, 2017 Share Posted December 30, 2017 Hi MaLd0n, Bummer! I've edited the post to attach the ioreg. Thanks again. Link to comment Share on other sites More sharing options...
edgarallan Posted December 30, 2017 Share Posted December 30, 2017 Hi all, my conf is Asus P8P67 Mobo, i5-2500k, and NVIDIA GeForce GT 640. using Nvidia web drivers. Using my pathed DSDT.aml and SSDT.aml (created with piker script). Drop OEM SSDT in Acpi config. AICPM seems implemented. If I go in sleep mode it takes some time (20 sec) to sleep then monitor and fans shut down. When I press any button to wake the fan restart but monitor still black. then I cannot wake up the pc and have to push shutdown button to reset and restart the machine. Have seen log but no kernel panic or (seems to me) messages after the sleep (simply there are no log messages). With Sierra i remember i've got no sleep problem. Thanks for you help, CLOVER.zip Send me francesco’s iMac.zip pmsetassertion.txt francesco’s iMac.ioreg.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 30, 2017 Share Posted December 30, 2017 Hi all, my conf is Asus P8P67 Mobo, i5-2500k, and NVIDIA GeForce GT 640. using Nvidia web drivers. Using my pathed DSDT.aml and SSDT.aml (created with piker script). Drop OEM SSDT in Acpi config. AICPM seems implemented. If I go in sleep mode it takes some time (20 sec) to sleep then monitor and fans shut down. When I press any button to wake the fan restart but monitor still black. then I cannot wake up the pc and have to push shutdown button to reset and restart the machine. Have seen log but no kernel panic or (seems to me) messages after the sleep (simply there are no log messages). With Sierra i remember i've got no sleep problem. Thanks for you help, u use web driver or native apple driver? btw idk if web driver work in Line 6xx Nvidia CheckCLOVER.zip 1 Link to comment Share on other sites More sharing options...
edgarallan Posted December 30, 2017 Share Posted December 30, 2017 Thanks MaLd0n, I'm using nvidia web drivers and they seems to work. In attachment you can find all my non apple loaded kext. I've tried your clover folder but the problem persist. Now with your solution the fan wake up only pushing the power button. The screen remain black. I forgot to say that the PC after the sleep and the "wake of dead" is unreachable by the network. I've done hundred of trying. Hope you can find a solution. Thanks a lot 1 Link to comment Share on other sites More sharing options...
mike7 Posted December 30, 2017 Share Posted December 30, 2017 Hi MaLd0n, I have problem with "sleep" function too, please help if you can. ga-z97-hd3 mike-imac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 30, 2017 Share Posted December 30, 2017 Hi MaLd0n, I have problem with "sleep" function too, please help if you can. ga-z97-hd3 CLOVER.zip check kexts in Clover/Kexts/Other, use only it 1 Link to comment Share on other sites More sharing options...
edgarallan Posted December 31, 2017 Share Posted December 31, 2017 Hi MaLd0n, the problem for me persist (with your clover too). In your opinion is related to AICPM or video card? Thanks for any help. I'm loosing my mind on this (i love sleep function, i'm tempted to roll back to sierra). Thanks in advance! 1 Link to comment Share on other sites More sharing options...
mike7 Posted December 31, 2017 Share Posted December 31, 2017 MaLd0n, really thanks! Work like a charm! <3 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted December 31, 2017 Share Posted December 31, 2017 Hi MaLd0n, the problem for me persist (with your clover too). In your opinion is related to AICPM or video card? Thanks for any help. I'm loosing my mind on this (i love sleep function, i'm tempted to roll back to sierra). Thanks in advance! yes i have one Sandy here, ill test it and report for u. MaLd0n, really thanks! Work like a charm! Welcome! Enjoy! 1 Link to comment Share on other sites More sharing options...
mike7 Posted January 1, 2018 Share Posted January 1, 2018 Same problem with other machine.. .restart after sleep.. ga-z77m-d3h-mvp Please help again mike2-mac-EFI.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts