zoltanpl Posted November 26, 2017 Share Posted November 26, 2017 Hello. I'm trying to install High Sierra 10.13.1 on my PC. But i'm stuck with few things. First my spec: Proc: Ryzen 7 1700 MB: Asus Prime x370 - pro Gfx: Nvidia gtx 680 and 1080ti (for installation 1080 i take off from pc) SSD - samsung 960 evo (nvme) few HDD's USB for installer And there are problems i identify: After few hours of trying and adding, removing kext i succesfully installed OS to HDD but after formatting this HDD to any mac format installer stops detecting this HDD (then i cannot run any script - disk isn't visible in disk manager and listing of this hdd is also unsuccesfully) but if i clear GUID on this hdd in windows it make visible in macos installer and i can format and install HS. After rebooting Clover recognize this HDD (and i am able to boot HS) but after that i have info: Waiting for root device. When i put some AHCI kext it works or not (no idea - looks like randomly). About hdd - this disk i'm able to run and read without problems on my second PC (Yosemite). Ahh important thing, i cannot format and change pratitions on other preformatted in windows disks too. i need to have cleaned RAW HDD. GTX 680 also don't want to start when i disble SIP i got errors, when SIP is enable i got instant reboot. I need advice about which kext are obligartory to use in my spec, how set clover. Best Regards Marcin Link to comment Share on other sites More sharing options...
bbmatias3 Posted November 26, 2017 Share Posted November 26, 2017 Hello. I'm trying to install High Sierra on my PC. But i'm stuck with few things. First my spec: Proc: Ryzen 7 1700 MB: Asus Prime x370 - pro Gfx: Nvidia gtx 680 and 1080ti (for installation 1080 i take off from pc) SSD - samsung 960 evo (nvme) few HDD's And there are problems i identify: After few hours of trying and adding, removing kext i succesfully installed OS to HDD but after formatting this HDD to any mac format installer stops detecting this HDD (then i cannot run any script - disk isn't visible in disk manager and listing of this hdd is also unsuccesfully) but if i clear GUID on this hdd in windows it make visible in macos installer and i can format and install HS. After rebooting Clover recognize this HDD (and i am able to boot HS) but after that i have info: Waiting for root device. When i put some AHCI kext it works or not (no idea - looks like randomly). About hdd - this disk i'm able to run and read without problems on my second PC (Yosemite). Ahh important thing, i cannot format and change pratitions on other preformatted in windows disks too. i need to have cleaned RAW HDD. GTX 680 also don't want to start when i disble SIP i got errors, when SIP is enable i got instant reboot. I need advice about which kext are obligartory to use in my spec, how set clover. Best Regards Marcin Here is my efi /clover Your might have to use your lower end card to boot https://drive.google.com/open?id=1ogq85t-uSLRp-RxuuX07naEVsyhsFKpz Try inject nvidia to boot don’t inject web Link to comment Share on other sites More sharing options...
zoltanpl Posted November 26, 2017 Author Share Posted November 26, 2017 no luck, installer still doesn't see my hdd with installed OS Here is my efi /cloverYour might have to use your lower end card to boothttps://drive.google.com/open?id=1ogq85t-uSLRp-RxuuX07naEVsyhsFKpzTry inject nvidia to boot don’t inject web Thx, but no luck, still same problems, installer doesn't see my hdd with installed OS.... When boot OS on HDD with your kext result is FORBIDDEN SIGN and Waiting for root device Link to comment Share on other sites More sharing options...
cyrhex Posted November 26, 2017 Share Posted November 26, 2017 no luck, installer still doesn't see my hdd with installed OS Thx, but no luck, still same problems, installer doesn't see my hdd with installed OS.... When boot OS on HDD with your kext result is FORBIDDEN SIGN and Waiting for root device u must have those kext ahciportinjector.kext and iobiosblockstorage.kext installed on efi/clover/kext,,,,,create a high sierra installer on hdd,amd board had an issue on macOS since elcapitan Link to comment Share on other sites More sharing options...
zoltanpl Posted November 27, 2017 Author Share Posted November 27, 2017 u must have those kext ahciportinjector.kext and iobiosblockstorage.kext installed on efi/clover/kext,,,,,create a high sierra installer on hdd,amd board had an issue on macOS since elcapitan where can i find iobiosblockstorage.kext?? uncle google isn't helpfull Link to comment Share on other sites More sharing options...
Gigamaxx Posted November 27, 2017 Share Posted November 27, 2017 no luck, installer still doesn't see my hdd with installed OS Thx, but no luck, still same problems, installer doesn't see my hdd with installed OS.... When boot OS on HDD with your kext result is FORBIDDEN SIGN and Waiting for root device Do you have apfsEFI in Clover/Drivers64EFI folder? apfs.efi Link to comment Share on other sites More sharing options...
zoltanpl Posted November 27, 2017 Author Share Posted November 27, 2017 Do you have apfsEFI in Clover/Drivers64EFI folder? Clover:Drivers64EFI folder.png Yep... but HDD is formated as HFS not as APFS One more installer see my other hdds, nvme one too and Mac RAID disk also. But doesn,t see High Sierra Os disk... what's going on... I will try on another HDD maybe there is a problem... hmmm Link to comment Share on other sites More sharing options...
zoltanpl Posted November 27, 2017 Author Share Posted November 27, 2017 Ok after investigating problem - that was HDD when i change to another one HS is allways visible, i make preinstall script and postinstall script but when i start system 1st time with SIP i got instant restart, when SIP is diasbled the apple logo appear and booting don't go further. Should i use some more settings for GTX 680? After disabling NVIDIA inject in clover options all monitors are black.. Ok important thing - disabling NVIDIa inject and selecting NVIDIA single make work!!!! Link to comment Share on other sites More sharing options...
zoltanpl Posted November 28, 2017 Author Share Posted November 28, 2017 Hi finally my system work fine I found sollution if you have 2 gfx (1080ti and 680) onborad. If you start installer from USB you need to tick in clover setings for GTX 680 Inject NVIDIA and Single Card, untick injectNvidia for gtx 1080ti and installer boots up. I found that poor performance of GTX 1080ti is that card doesn't change p-state when running 3D application like Cinebench, is that possible??? Best Regards Marcin Link to comment Share on other sites More sharing options...
Zeblade Posted December 26, 2017 Share Posted December 26, 2017 So.. in this thread its OK to have a link to google drive. Yet in another it was blocked as could be might be by some piracy. So lost Link to comment Share on other sites More sharing options...
Recommended Posts