flammenwerfer Posted November 28, 2017 Share Posted November 28, 2017 Hi all, I have a problem with my DSDT. I actually have enabled everything (red: fixed everything) but i still can't disable my NVIDIA and also my HDMI Audio isn't working, can you guys help me to solve this issue?Here I am attaching currently booted DSDT and also PURE DSDT from my laptop My Laptop is ASUS A451LB CPU : Intel Core i3-4010U (haswell) GPU : Intel HD 4400 + NVIDIA GeForce GT740M HDD : 120GB SSD (Windows) and 1 TB HDD (OS X El Capitan) RAM : 8 GB What's working is everything except the NVIDIA (I want it to be disabled by you guys) and HDMI Audio (HDMI-Only Works fine) Well, actually I've managed to disable the NVIDIA on previous installation but I forgot to backup my patched DSDT so I lost everything. PS : Sleep using FN+F1 combination is also not working (triggering shutdown / hibernate) PS Again : Sleep is totally broken, IDK what happened, it was fine last night Thanks before DSDT.zip Link to comment Share on other sites More sharing options...
limurphy Posted November 28, 2017 Share Posted November 28, 2017 Try: 封存.zip Link to comment Share on other sites More sharing options...
flammenwerfer Posted November 28, 2017 Author Share Posted November 28, 2017 Well, there certainly seems to be a lot of patched tables in your patched folder and I can see that DSDT + SSDT_11 have been modified to turn off your nVidia GPU. All seems properly covered on that front... Just make sure you call on those patched SSDT tables in the right order and with the right names your clover config (I assume you use Clover). Fn-F1 is known to attempt system hibernation and cause shutdown (with probable error message at subsequent reboot). Avoid it, close the lid/press PWR button/use Apple menu option to put laptop to sleep instead. If sleep is currently broken, check your hibernation settings (set hibernate mode to 0 if required) ) and remove the sleep image located in /var/vm. If HDMI works Ok with the HD4400 iGPU, check that you've patched Azul layout 0x0a260006 to set FB #1/port #5 to HDMI connector type 0008; by default, it's set to DP type and that does not support HDMI audio. Your patched SSDT-10 contains the necessary definition for device HDAU. The patch normally required to support HDMI audio is explained here. Under layout-id 0x0600260A (El Capitan Azul FB code below): 0600260A 01030303 00000002 0000300100006000 00000060 D90A0000 D90A000000000000 00000000 00000800 0200000030000000 01050900 00040000 8700000002040900 00040000 87000000 FF00000001000000 40000000 0F000000 0101000004000000 00000000 0E000000 00000000Apply the following binary patch:\/ \/Find: 010509000004000087000000Replace: 010512000008000087000000 /\ /\In Clover, the on-the-fly patch can be:Find: 0600260A0103030300000002000030010000600000000060D90A0000D90A00000000000000000000000008000200000030000000010509000004000087000000Replace: 0600260A0103030300000002000030010000600000000060D90A0000D90A00000000000000000000000008000200000030000000010512000008000087000000 Well, thankyou for the quick replyI think I've enabled the HDMI Audio (can't test yet because I'm not home) But the NVIDIA is still there, any chance to get it disabled? It's really frustrating for me (Once, I've successfully disabled it but I just forgot the steps) to disable the nvidia to reduce heat and increase the battery life Or should I bring my clover config here? Sent from my Mi-4c using Tapatalk Link to comment Share on other sites More sharing options...
flammenwerfer Posted November 28, 2017 Author Share Posted November 28, 2017 Well, there certainly seems to be a lot of patched tables in your patched folder and I can see that DSDT + SSDT_11 have been modified to turn off your nVidia GPU. All seems properly covered on that front... Just make sure you call on those patched SSDT tables in the right order and with the right names your clover config (I assume you use Clover). Fn-F1 is known to attempt system hibernation and cause shutdown (with probable error message at subsequent reboot). Avoid it, close the lid/press PWR button/use Apple menu option to put laptop to sleep instead. If sleep is currently broken, check your hibernation settings (set hibernate mode to 0 if required) ) and remove the sleep image located in /var/vm. If HDMI works Ok with the HD4400 iGPU, check that you've patched Azul layout 0x0a260006 to set FB #1/port #5 to HDMI connector type 0008; by default, it's set to DP type and that does not support HDMI audio. Your patched SSDT-10 contains the necessary definition for device HDAU. The patch normally required to support HDMI audio is explained here. Under layout-id 0x0600260A (El Capitan Azul FB code below): 0600260A 01030303 00000002 0000300100006000 00000060 D90A0000 D90A000000000000 00000000 00000800 0200000030000000 01050900 00040000 8700000002040900 00040000 87000000 FF00000001000000 40000000 0F000000 0101000004000000 00000000 0E000000 00000000Apply the following binary patch:\/ \/Find: 010509000004000087000000Replace: 010512000008000087000000 /\ /\In Clover, the on-the-fly patch can be:Find: 0600260A0103030300000002000030010000600000000060D90A0000D90A00000000000000000000000008000200000030000000010509000004000087000000Replace: 0600260A0103030300000002000030010000600000000060D90A0000D90A00000000000000000000000008000200000030000000010512000008000087000000 Hey, I have disabled the Nvidia but now I lose QE/CI on my Intel HD 4400 ? Whoops, Finally I made it Everything is working now, thank you for helping me Sent from my Mi-4c using Tapatalk Link to comment Share on other sites More sharing options...
flammenwerfer Posted November 29, 2017 Author Share Posted November 29, 2017 Eh, anyaway, my CPUFan isn't spinning at all on this hackintosh? Any clues to fix it? Sent from my Mi-4c using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts