ttonevbg Posted November 16, 2017 Share Posted November 16, 2017 I succesfully installed Sierra with Clover. But I have 2 annoying problems. Problem 1: When I boot Intel with fakeid "0x12345678" It boots fine, but the resolution is low and it says "Display 4MB" . And verry laggy. I am injecting Intel. If i leave the faxeid 0x00000000 it does not boot Stucks on IGPU. Problem 2: At clover boot menu it recognizes my Nvidia GT 540M, but when i try to boot it stucks at "nvenabler: probe: ROM shadow". I installed Nvidia web driver succesfully, but still i can't boot. I am booting with "-v GraphicsEnabler=No maxmem=1536 dart=0" + nvidia inject + Use Web Drivers. I have tried GraphicsEnabler=Yes, it gives the same error. I have installes Nvidia Web drivers and injected NVEnabler, without the enabler it gives timeout(60) GFX0. Thanks in advance. My specs: Acer 5742G Nvidia GT 540M. Intel Core i3-370M 2.4GHz HDD instalation. Any advice? Link to comment Share on other sites More sharing options...
sarvodaya1219 Posted November 17, 2017 Share Posted November 17, 2017 I succesfully installed Sierra with Clover. But I have 2 annoying problems. Problem 1: When I boot Intel with fakeid "0x12345678" It boots fine, but the resolution is low and it says "Display 4MB" . And verry laggy. I am injecting Intel. If i leave the faxeid 0x00000000 it does not boot Stucks on IGPU. Problem 2: At clover boot menu it recognizes my Nvidia GT 540M, but when i try to boot it stucks at "nvenabler: probe: ROM shadow". I installed Nvidia web driver succesfully, but still i can't boot. I am booting with "-v GraphicsEnabler=No maxmem=1536 dart=0" + nvidia inject + Use Web Drivers. I have tried GraphicsEnabler=Yes, it gives the same error. I have installes Nvidia Web drivers and injected NVEnabler, without the enabler it gives timeout(60) GFX0. Thanks in advance. My specs: Acer 5742G Nvidia GT 540M. Intel Core i3-370M 2.4GHz HDD instalation. Any advice? Nvdia 540 M is not supported by mac os x. just boot with normal flags and nv_disable-1 and fake id and install these kexts using kext editor after updating to 10.12.6 Inteldvmtfixup , lilu, intelgraphicsfixup. Download it from here https://bitbucket.org/RehabMan/. After installing using clover configurator make sure to uncheck intel under graphics in config p list in efi folder Link to comment Share on other sites More sharing options...
ttonevbg Posted November 17, 2017 Author Share Posted November 17, 2017 Nvdia 540 M is not supported by mac os x. just boot with normal flags and nv_disable-1 and fake id and install these kexts using kext editor after updating to 10.12.6 Inteldvmtfixup , lilu, intelgraphicsfixup. Download it from here https://bitbucket.org/RehabMan/. After installing using clover configurator make sure to uncheck intel under graphics in config p list in efi folder How should update? Изпратено от моят MIX с помощта на Tapatalk Link to comment Share on other sites More sharing options...
ttonevbg Posted November 17, 2017 Author Share Posted November 17, 2017 Edit: I updated it, will givd it a try. Изпратено от моят MIX с помощта на Tapatalk Link to comment Share on other sites More sharing options...
ttonevbg Posted November 17, 2017 Author Share Posted November 17, 2017 It stuck aftrr update. I am reinstalling. Btw will these fixes work(it says only Intel HD graphics) so It is supposed to be first gen intel. Изпратено от моят MIX с помощта на Tapatalk Link to comment Share on other sites More sharing options...
sarvodaya1219 Posted November 17, 2017 Share Posted November 17, 2017 when booting to clover, go to clover options and see what platform id is. copy the platform id to fake id and change platform id to 0x12345678 Link to comment Share on other sites More sharing options...
Recommended Posts