amir civil Posted October 31, 2017 Share Posted October 31, 2017 successfully installed high Sierra on my Acer V3-571G Follow the Steps : 1- download the image of High Sierra from this link : https://drive.google.com/open?id=0B3USSct6ujF6bHRxZElVWU5oaVk 2- Write it to your USB Flash (8 gb or higher) with Suse image writer (https://github.com/downloads/openSUSE/kiwi/ImageWriter.exe) Fairly Stright forward 3- First disable dual graphic in your laptop bios, and make sure VT-d is disabled. 4- install through your USB, two step installation, then after installation boot your hard disk from USB again. 5- install clover configurator then mount EFI partition to install bootloader, download the latest clover or just copy the clover folder inside EFI folder in USB 6- next after u installed clover bootloader , install attached kext to : Library/EXtensions not System/Library/Extensions (see the attachments) 7- Do the Repair cache and restart, Enjoy full QC High sierra boom I love it What is working : - BCM 57785 working, however when u restart It wont wake up until u shut down ur laptop !!!!!! - ALC269 working fully with my KEXT attached and layout injection 28 in clover devices tab - Wifi natively supported ( I chaned to the card that natively supported) - Graphic fully working HDMI but not VGA (inject this id 0x01660003) - Trackpad is also fully working with the attached kext. - my DSDT.aml and SSDT.aml attached in clover folder. Awesome operating system I love it Acer V3-571G.rar 1 1 Link to comment Share on other sites More sharing options...
amir civil Posted November 3, 2017 Author Share Posted November 3, 2017 Updated to 10.13.1 successfully 1 Link to comment Share on other sites More sharing options...
cakoc Posted December 3, 2017 Share Posted December 3, 2017 Installed macOS, booted into system with usb bootloader. Installed Clover bootloader. Copied your files from "clover" folder into mounted EFI partition. Copied all kexts in /Library/Extensions/. Done terminal "sudo kextrepair -i /" and ran into this issue. Restarted and trackpad and keyboard no longer work, no kext seems to be installed? What is the issue? Link to comment Share on other sites More sharing options...
Felp Morn Posted March 22, 2018 Share Posted March 22, 2018 Hey! Thanks for the guide. The attachment link appears to be down, could you please upload it again? Thanks! Link to comment Share on other sites More sharing options...
khoahoc0508 Posted April 17, 2018 Share Posted April 17, 2018 (edited) Don't need NullCPUPowerManagement and you can enable optimus for windows performance. Just don't inject any infor of nvidia and patch SSDT-3.aml to disable it. Edited May 9, 2018 by khoahoc0508 Link to comment Share on other sites More sharing options...
WaPeR Posted July 20, 2018 Share Posted July 20, 2018 (edited) Hi! Could you update this guide with detailed info? I created a bootable Mac Os X USB (using a mac and uniboot) but I couldn't install the OS, I'm getting error: "macOS could not be installed on your computer". Where can I put the necessary kext to be installed with the OS? Thanks! Edited July 20, 2018 by WaPeR Link to comment Share on other sites More sharing options...
dalekdj Posted September 2, 2018 Share Posted September 2, 2018 On 10/31/2017 at 6:30 PM, amir civil said: successfully installed high Sierra on my Acer V3-571G Follow the Steps : 1- download the image of High Sierra from this link : https://drive.google.com/open?id=0B3USSct6ujF6bHRxZElVWU5oaVk 2- Write it to your USB Flash (8 gb or higher) with Suse image writer (https://github.com/downloads/openSUSE/kiwi/ImageWriter.exe) Fairly Stright forward 3- First disable dual graphic in your laptop bios, and make sure VT-d is disabled. 4- install through your USB, two step installation, then after installation boot your hard disk from USB again. 5- install clover configurator then mount EFI partition to install bootloader, download the latest clover or just copy the clover folder inside EFI folder in USB 6- next after u installed clover bootloader , install attached kext to : Library/EXtensions not System/Library/Extensions (see the attachments) 7- Do the Repair cache and restart, Enjoy full QC High sierra boom I love it What is working : - BCM 57785 working, however when u restart It wont wake up until u shut down ur laptop !!!!!! - ALC269 working fully with my KEXT attached and layout injection 28 in clover devices tab - Wifi natively supported ( I chaned to the card that natively supported) - Graphic fully working HDMI but not VGA (inject this id 0x01660003) - Trackpad is also fully working with the attached kext. - my DSDT.aml and SSDT.aml attached in clover folder. Awesome operating system I love it Acer V3-571G.rar mate the link of high sierra not work..is a distro of HS or is a original high sierra image? Link to comment Share on other sites More sharing options...
Recommended Posts