Jump to content

battery and audio fix


vickiozi
 Share

61 posts in this topic

Recommended Posts

Sys Information:

Dell Inspiron 5558

 

Intel ® Core™ i3-4005U CPU @ 1.70 GHz
Intel HD graphics 4400
DDR3L SDRAM 4096 MB
Realtek ALC3234

 

Hi guys , after many attempts I got Sierra updated to 12.6 thanks to your help :) ,but now I need your help guys to fix audio and  battery. (what kind of kext should I use)

Here is my PCI List , post-1968735-0-98437300-1509292201_thumb.jpg

Also, should I patch my dsdt , if yes should I use the same post   http://www.insanelymac.com/forum/topic/322764-fix-ethernet-and-audio-controller/

Thanks guys really , I don't even know what would I do without your help :)

Link to comment
Share on other sites

for audio try like this...

mount config with clover configurator, devices \ audio section ... try layout 3, 13, 17, 27, 28..one at a time then restarts and checks..

in efi applealcwith lilu.kext

Thanks again for your reply , so under Audio section(blank space ) I just need to write 3 then 13 etc one at a time right ? then i just need to replace this generated config with the config on EFI ?

  • Like 1
Link to comment
Share on other sites

Thanks again for your reply , so under Audio section(blank space ) I just need to write 3 then 13 etc one at a time right ? then i just need to replace this generated config with the config on EFI ?

yes write one at the time...then restart...only this

  • Like 1
Link to comment
Share on other sites

yes write one at the time...then restart...only this

I did but still not working , may be this problem cuz I'm using also this guide  before u told me ur way - http://www.insanelymac.com/forum/topic/322764-fix-ethernet-and-audio-controller/, also im using a pached dsdt for audio . Should i undone this step and use only ur way(lilu.kext + Audio section) , without dsdt and the other things i've patched 

Link to comment
Share on other sites

if the pc goes without dsdt try to remove it for now ... installs applehda attached then repairs the permissions from the terminal. then as by written instructions test different layouts one at a time followed by a pc restart

 

for repair permission...to terminal

 

 

sudo touch /System/Library/Extensions && sudo kextcache -u /

 

p.s.

 

if it did not work with hervé I'm worried.....

AppleHDA.kext.zip

Link to comment
Share on other sites

if the pc goes without dsdt try to remove it for now ... installs applehda attached then repairs the permissions from the terminal. then as by written instructions test different layouts one at a time followed by a pc restart

 

for repair permission...to terminal

 

 

sudo touch /System/Library/Extensions && sudo kextcache -u /

 

p.s.

 

if it did not work with hervé I'm worried.....

So i removed dsdt and pc starts , but i also installed ur kext , and did the layout once at a time but still not working :(

Link to comment
Share on other sites

I can't find any kexts there. Open terminal and write

ls /System/Library/Extensions/ | grep -i alc
ls /System/Library/Extensions/ | grep -i lilu
ls /Library/Extensions/ | grep -i alc
ls /Library/Extensions/ | grep -i lilu

Post what it shows you.

 

Edit:

 

I found an EFI folder at post #14

Replace Lilu 1.1.7 with Lilu 1.2.0 (Lilu.kext.zip) and add AppleALC 1.2.0 (AppleALC.kext.zip)

  • Like 1
Link to comment
Share on other sites

I can't find any kexts there. Open terminal and write

ls /System/Library/Extensions/ | grep -i alc
ls /System/Library/Extensions/ | grep -i lilu
ls /Library/Extensions/ | grep -i alc
ls /Library/Extensions/ | grep -i lilu

Post what it shows you.

 

Edit:

 

I found an EFI folder at post #14

Replace Lilu 1.1.7 with Lilu 1.2.0 (attachicon.gifLilu.kext.zip) and add AppleALC 1.2.0 (attachicon.gifAppleALC.kext.zip)

okay Thanks for reply , post-1968735-0-33576200-1509398508_thumb.jpg , also i used that script and as i can see thhe AppleAlc its running now but still not working also I replaced with ur kext(lilu and applealc)

Link to comment
Share on other sites

Remove AppleHDA_ALC255.kext from /Library/Extensions. Try with layouts suggested by marzillo here.

Well Thanks for these reply guys , Thanks a lot 

Just wanted to say that i've tried those layout and i did everything from the beggning also the install , clean one(kext only suggested by you) , but still not working .

When u mention layout do u mean the inject blank space in Audio section 

Link to comment
Share on other sites

When u mention layout do u mean the inject blank space in Audio section 

Yep. If you're still not getting audio devices detected, attach your clover folder and post the output of these commands:

Open terminal and write

kextstat | grep -v com.apple
kextstat | grep -i hda
ls /System/Library/Extensions | grep -i hda
ls /System/Library/Extensions | grep -i alc
ls /System/Library/Extensions | grep -i lilu
ls /Library/Extensions | grep -i hda
ls /Library/Extensions | grep -i alc
ls /Library/Extensions | grep -i lilu
  • Like 1
Link to comment
Share on other sites

 

Yep. If you're still not getting audio devices detected, attach your clover folder and post the output of these commands:

Open terminal and write

kextstat | grep -v com.apple
kextstat | grep -i hda
ls /System/Library/Extensions | grep -i hda
ls /System/Library/Extensions | grep -i alc
ls /System/Library/Extensions | grep -i lilu
ls /Library/Extensions | grep -i hda
ls /Library/Extensions | grep -i alc
ls /Library/Extensions | grep -i lilu

CLOVER.rar , and here is the output 

insanlymac.rar

Link to comment
Share on other sites

 Share

×
×
  • Create New...