4110 replies to this topic

[David7586]

Rene204, on Nov 19 2006, 05:26 AM, said:

Hm, have tested just now with my ALC882, Mic-In is working fine (stereo!)...  have recorded and can play the recording fine.

Here it is working...

Rene

(You can try to use your iPod-Headphone as an Mic, must set up the recording volume to max...)

The asus P5w DH has the alc882M codec as opposed to yours which has the alc882. i wonder what the difference is between the 2.

[flatlyna]

Awesome work guys, it works well on my Abit AW9D (ALC882).

Line Out - on rear green jack.  Volume didn't work initially from menubar control or keys (I have an Apple Pro keyboard).  Volume adjusted ok in sound control panel and that seems to have enabled menubar and keyboard now.

Digital Out - TOSLINK connector.  Works perfectly, no system level control (expected).  Volume in iTunes and apps works fine.  Apple DVD player sends Dolby Digital to receiver once digital out selected in prefs.  

Internal Microphone - on rear pink jack.  Appears ok, haven't done a recording but I get meter readings tapping on mic.

There is a listing for Internal Microphone as a built-in output. No audio comes out of any remaining jacks.

[Ezhoon]

I've tried on Asus P5LD2 mobo with alc882.

Sound out works perfectly, although mic in input didn't work
I tried couple of mic lying around but, those mic could be defective
I have to test more about this mic-in

It seems output quality of sound is a bit better using this AppleHDA.kext.
It produces a bit clearer sound, I think.  

Big thanks goes to Taruga and the gang, great work guys    

Btw, is there any chance this kext could possibly work on alc260?

[Doosje]

Can anyone report success on a laptop with ALC882 ?

[General_Cartman]

On my alc882m on the N4L-VM DH mainboard which has a i945GM chipset, The kext installed, however i didn't get sound on any output on the rear even no matter what output was selected.

[Menno]

Ezhoon, on Nov 20 2006, 03:58 AM, said:

I've tried on Asus P5LD2 mobo with alc882.

Sound out works perfectly, although mic in input didn't work
I tried couple of mic lying around but, those mic could be defective
I have to test more about this mic-in

It seems output quality of sound is a bit better using this AppleHDA.kext.
It produces a bit clearer sound, I think.  

Big thanks goes to Taruga and the gang, great work guys    

Btw, is there any chance this kext could possibly work on alc260?

It isn't what you think. It's just true
My sound is way better than Azalia (I have 2 professional speakers of very high value )

Success with output @ Asus P5LD2-V motherboard (alc882)
I can use the volume buttons also, but I am on a apple keyboard so it should work anyway. I don't have a mic to test though

[Taruga]

Curious... I didn´t noticed that sound was better.  I´ve been working late at night, so that´s why I didn´t noticed.  I´m glad to hear feedback, btw, i also have an Apple keyboard and volume control with keyboard isn´t working, that´s why I´ve put it on the next things to do.

[Menno]

Taruga, on Nov 20 2006, 05:16 PM, said:

Curious... I didn´t noticed that sound was better.  I´ve been working late at night, so that´s why I didn´t noticed.  I´m glad to hear feedback, btw, i also have an Apple keyboard and volume control with keyboard isn´t working, that´s why I´ve put it on the next things to do.

Well it dind't worked on the first instance, but after going to sound > output, changing the volume there they suddenly worked

[bonald]

i have alc861. it works with azelia and device id from alc882*(didn't work with device id from 861).

tried this kext didn't work. How can I make it work for alc861?

[The Baron]

I tried the installer and got the iternal microphone, Line out & Digital out on my sys pref.  Still using Line out (I too noticed a sound improvement, maybe I imagined it :-) )

Next I'll test spdif, got to do a bit of tidying up first,

Cheers, and good luck.

[erikk]

tested with vitaly kernel 8.8.1 on asrock conroe2dvi board and it doesnt work... but good work.
alcinject seems to load... but i dont get an available soundcard overall.

[asapreta]

In my P5WD2 Premium I only got ALERT sounds, other sounds (Itunes, etc.) doesn't work.

Mic didn't work either, even in the front ports (configured as AC'97).

Rammjet, on Nov 16 2006, 02:07 PM, said:

Are you getting errors on boot about Azalia? Go to Terminal and type: sudo dmesg
Look for errors. If you do see errors, you might need to fix the permissions on Azalia. Go to Terminal and type:

cd /System/Library/Extensions
sudo chown -R root:wheel AppleAzaliaAudio.kext
sudo chmod -R 755 AppleAzaliaAudio.kext
diskutil repairpermissions /
cd /System/Library
sudo rm -rf Extensions.mkext Extensions.kextcache

Then reboot.

Did you try it?

[iMäcen]

I tried on my ALC850, but I still only get Line out. I am willing to test more releases in the future.

[asapreta]

Taruga helped me and now I have full output sound.
By default the OUTPUT device was not selected.

Thanks.

[alicheusz]

bonald, on Nov 20 2006, 05:27 PM, said:

i have alc861. it works with azelia and device id from alc882*(didn't work with device id from 861).

tried this kext didn't work. How can I make it work for alc861?

I also try with 861 but don't work for me too.

I try few setup mix with device id I change it from 882 to 880 (Azlilia has 880 and it worked with 861)

change in all kext PCIMatch to match ICH 6


<key>IOPCIPrimaryMatch</key>
<string>0x27D88086</string>

to

<key>IOPCIPrimaryMatch</key>
<string>0x26688086</string>

maybe 861 use some different layout id  

[Taruga]

alicheusz, if you want to test with other than alc882, you have to hex edit AppleHDA binary, because it´s locked with 10ec0882 (codec id 283904130)

[Sniperfox]

i have too realtek al 861 but itunes, qucikt time, ect don't work..

on the dvd of Myzar (10.4.5) it was very good !

its possible for recup audio on the dvd myzar??

sorry for myn english

[Sniperfox]

have you got a patch for realtek alc861?

[plas]

Taruga, on Nov 20 2006, 07:16 PM, said:

alicheusz, if you want to test with other than alc882, you have to hex edit AppleHDA binary, because it´s locked with 10ec0882 (codec id 283904130)

Any chance you could tell us where this change needs to happen within the binary.
Or should i just search for 10ec0882

I really would like to get sound working with alc861 ive tried ever method so far with other kexts (Azalia) with no luck.

[shmk]

Works for me but I have the same mother board. Cheers