Jaime5 Posted January 28, 2008 Share Posted January 28, 2008 Hi: I have a a DG965WH board with STAC9271 or STAC9271D. I install the STAC9271D_0x83847627_testing.zip driver in Mac tiger, and works fine, but in Leopard dont work, i install with kext helper. I Need Help. Thanks Link to comment Share on other sites More sharing options...
miko88 Posted January 29, 2008 Share Posted January 29, 2008 Any news with AD1981HD on HP NX7300? Please, I've tried all guide with no solution. Link to comment Share on other sites More sharing options...
crazybanane Posted January 29, 2008 Share Posted January 29, 2008 Have a little problem... AppleHDA Patcher - 2006/2007 by Taruga v1.20 _______________________________________________________ Codec : Generic 11c1 Si3054 Vendor Id : 0x11c11040 Subsystem Id : 0x11c10001 _______________________________________________________ * Detected unsupported Generic Codec LENOVO 3000 C200 Kalyway 10.5.1 Intel Celeron M 420 / 1.6 GHz / 533 MHz Mobile Intel 945GM Express 1 Go DDR II SDRAM - 667 MHz Intel GMA 950 Audio Codec: Realtek ALC861VD Can I try ALC861d codec ? and how to install uninstall ? Thanks Link to comment Share on other sites More sharing options...
limneos Posted January 30, 2008 Share Posted January 30, 2008 which audio driver has the asus p5ld2-x/1333 motherboard?i installed osx 10.5 in my pc!! pls help me The SOUND CARD coming with this model of Asus is ALC662 . I have the same myself, it works with Azalia driver but only 2 channel output, no inputs, but it works perfectly with Taruga's 1.20 patcher and the codec dump I have uploaded for you. Give it a try, only problem with patcher: No volume control sliders. alc662.txt Link to comment Share on other sites More sharing options...
sh0td0wn Posted January 30, 2008 Share Posted January 30, 2008 Not working... used the patcher with ALC883 (Onboard on HP Stock nForce AM2 Motherboard - See sig) When I applied the patcher, it killed something in the MACH kernel since before I patched AppleHDA with the patcher, I can reboot/shutdown/sleep. I re-installed Leopard and is now waiting for a solution for this problem. Link to comment Share on other sites More sharing options...
mcdonnr Posted January 31, 2008 Share Posted January 31, 2008 So, a quick question. I've read through this as much as possible, making sure I'm not posting a duplicate question, and I apologize if I missed something. I've got an MSI P6N Diamond board. I am trying to figure out how to make my Creative SB X-Fi Extreme HD Audio work. I saw someone ask this earler (or similar) but they were brushed off and told that we were only talking about INTEGRATED audio... but this IS integrated on this board (http://www.newegg.com/Product/Product.asp?Item=N82E16813130080). So. I am looking, essentially, for a codec dump of this board's integrated HD audio. Any help here? Link to comment Share on other sites More sharing options...
patrickmcfennelly Posted January 31, 2008 Share Posted January 31, 2008 is there a possibility of a patch to work with ubuntu linux? I'm newer than new to linux and this "no sound" issue is driving me up the wall. Link to comment Share on other sites More sharing options...
davideckels Posted January 31, 2008 Share Posted January 31, 2008 is there a possibility of a patch to work with ubuntu linux? I'm newer than new to linux and this "no sound" issue is driving me up the wall. I've sent you a private message regarding sound problems in Ubuntu. Link to comment Share on other sites More sharing options...
rajkosto Posted January 31, 2008 Share Posted January 31, 2008 i have a p5n-e sli mobo with alc883 but i cant get 5.1 analog out working (even had latest updated alsa in fedora8 dump the codec then use with it) it has 3 jacks on the back and i connected 2 jacks on the front to the mobo the back jacks i use for 5.1 analog the front jack i use one for mic Link to comment Share on other sites More sharing options...
clintoy Posted January 31, 2008 Share Posted January 31, 2008 any news for alc888 + ich7 ??? unite!!! pls help... Link to comment Share on other sites More sharing options...
tivimac Posted February 1, 2008 Share Posted February 1, 2008 any news for alc888 + ich7 ??? unite!!!pls help... Im too have the same problem. No sound with ALC888+ICH7 Link to comment Share on other sites More sharing options...
davideckels Posted February 1, 2008 Share Posted February 1, 2008 My sound is now working: 2 spkr through line output in rear and headphones in front, all I can test. Okay- Gateway GM5442: Processor: Intel® Core™2 Duo E4400 Dual Core Processor, both cores working; Chipset: Intel 945G chipset, obviously working; -Onboard Video: Intel Graphics Media Accelerator 950 - disabled; Video Card: GeForce 7300 GT working, supported by install disc; Integrated Audio: Sigmatel 9227 codec- working, see notes; -Integrated Network: Intel 10/100 Mbps Ethernet LAN - disabled; Network Card: Dlink DGE-530T- working, see notes; Bluetooth: Ambicom BT2Usb dongle, working, supported by install disc. 1. Installed Kalyway 10.5.1 with EFI: 1A. Formatted a 120GB partition with Fat32 and labelled it OSX for ease of identification, using gparted from inside Ubuntu; 1B. At beginning of OSX install, used Disk Utility to erase the OSX partition and replace with HFS+ (case sensitive); 1C. Choose appropriate drivers and allow install to finish; 1D. At end of install, rebooted into OSX computer without network or sound. 2. Network setup: 2A. Downloaded Kext Helper b7 to thumb drive in Ubuntu (attached below); 2B. Downloaded network card driver skge-e.kext (attached below); 2C. Installed network card driver skge-e.kext by dragging skge-e.kext file onto Kext Helper b7, and rebooted. Configured network card following reboot. 3. Sound setup: 3A. Downloaded AppleHDAPatcher_v1.16 from Taruga (attached below); 3B. Did own codec dump for sound card from Ubuntu Studio (attached below); 3C. Installed sound driver by dragging sigmatel9227.txt onto AppleHDAPatcher_v1.16, patiently watching, and rebooting when appropriate. 4. Post install: 4A. Created post outlining hardware specs including computer model for easy searching by other newbies; 4B. Donated to Taruga and Kalyway, as I'm able to do this only because of their hard work; 4C. Started saving for Apple retail copy of OSX in order to "get right." Mostly right. Kext_Helper_b7.zip skge_e.kext.zip sigmatel9227.txt AppleHDAPatcher_v1.16.zip Link to comment Share on other sites More sharing options...
ryhoo2 Posted February 1, 2008 Share Posted February 1, 2008 I got this codec dump from a working Ubuntu installation. After Ubuntu installation I had the same problem as on a Mac - I heard the sound only thru headphones. But I found how to fix it - I've added this line to the ALSA driver configuration (/etc/modprobe.d/alsa-base): options snd-hda-intel model=3stack Now the speakers work perfectly! And when I plugged-in my headphones, speakers are mute! So I dumped the codec entries from /proc/asound/card0/codec#0 (it is attached to this mail). And tihs codec file is much different from the one I got before applying this options line, so it got to be working! I tried it with AppleHDA.patcher 1.16, but there's no change, still I hear the sound only via headphones:( I will try 1.17 later, but I'm not sure if it's gonna work... Maybe the patcher does not set all the parameters form the codec file correctly?? Please help me with that. P.S. I got Dell Vostro 1400 laptop (Sigmatel 9228 audio codec) stac9228_3stack.txt Link to comment Share on other sites More sharing options...
brnoob Posted February 1, 2008 Share Posted February 1, 2008 (edited) Total amount of Donations so far: 146 euros Hey taruga! if possivel and when possivel i would really love it to have my ALC 882 5.1 analog working! i know that there are a lot of "deaf" people out there and their necessities are much bigger than mine. so keep up with the great work! i hope i´ve helped in something. can´t donate more than 10E, sorry. Bom trabalho! Edited February 2, 2008 by Taruga I´ll do my best, but that´s not an easy task. Link to comment Share on other sites More sharing options...
sese Posted February 1, 2008 Share Posted February 1, 2008 Taruga's alive!!! (He hasn't given us an update in a month) I think it might have some benefit waiting for 10.5.2 before you release the big 2.0 because I have had a look at the new audio kexts from the beta and some interesting results have came up possibly for easier detection processes as well. Link to comment Share on other sites More sharing options...
Jaime5 Posted February 1, 2008 Share Posted February 1, 2008 (edited) Hi: I install the audio drivers in tiger with no troubles, but in leopard iatkos R2, dont work I copy the 2 files in the extension library and type in terminal: sudo -s pongo password chown -R 0:0 /system/library/extensions chmod -R 755 /system/library/extensions rm /system/library/extensions.mkext rm /system/library/extensions.kextcache diskutil repairpermissions / Reboot Reboot and no audio, and sometimes (too many installs) this warning show after reboot driver name STAC9271D_0x83847627_testing.zip Board DG965WH In the technical specs of the board show this: STAC9271 and STAC9271D I need help, I need Audio!! Thanks _____________ Edited by Taruga Try: chown -R root:wheel /System/Library/Extensions/ALCinject.kext chmod -R 755 /System/Library/Extensions/ALCinject.kext chown -R root:wheel /System/Library/Extensions/AppleHDA.kext chmod -R 755 /System/Library/Extensions/AppleHDA.kext rm -f /System/Library/Extensions.* rm -Rf /System/Library/Extensions/Caches and then reboot Edited February 2, 2008 by Taruga Link to comment Share on other sites More sharing options...
Joeandmat Posted February 1, 2008 Share Posted February 1, 2008 to Jaime5: try with sudo -s you password chown -R root:wheel /System/Library/Extensions/nameofyourkext.kext chmod -R 755 /System/Library/Extensions/nameofyourkext.kext rm /System/Library/Extensions.mkext diskutil repairPermission / reboot or try with Kext Helper.. bye Link to comment Share on other sites More sharing options...
crisnen Posted February 2, 2008 Share Posted February 2, 2008 hi, i have a dell 640m. i installed kalyway iso. now im looking how to get my sound. i tried using applehda patcher, but i think im doing something wrong, of all files i drag n drop nothing happens. can anyone help me please thx Link to comment Share on other sites More sharing options...
Taruga Posted February 2, 2008 Author Share Posted February 2, 2008 (edited) Well , it seems I´m getting some good results at getting system profiler to report Audio Info. I´ll just have to do some more work, but it´s showing something Edited February 2, 2008 by Taruga A little better now.... Link to comment Share on other sites More sharing options...
iCrazy Posted February 2, 2008 Share Posted February 2, 2008 Well, it`s amazing! Link to comment Share on other sites More sharing options...
osx86noob Posted February 2, 2008 Share Posted February 2, 2008 Lenovo Y400 ALC862 works with TarugaALC862Installer2, but no volume control. Hope Taruga can fix this soon. internal speaker: working internal mic : not working line-out: working line-in mic : can see the indicator move, don't know if it is working Link to comment Share on other sites More sharing options...
doggyworld Posted February 2, 2008 Share Posted February 2, 2008 Hi Taruga, here is the dump from ECS 945GCT-M/1333. Nothing comes out from any inputs if we use just the patcher. But if we copy over a different AppleHDA.kext from someone else that used your patcher on a different board, it looks like it gives us audio output from the Mic input. Any ideas? Here's where we get our AppleHDA.kext from: http://forum.insanelymac.com/index.php?showtopic=78113 Here is our codec dump: Codec: SigmaTel STAC9221 A2 Address: 0 Vendor Id: 0x83847682 Subsystem Id: 0x10192950 Revision Id: 0x103601 Default PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x66 0x66] Power: 0x0 Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Power: 0x0 Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Power: 0x0 Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Power: 0x0 Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x17 Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x18 Node 0x08 [Audio Output] wcaps 0x40211: Stereo Digital PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Node 0x09 [Audio Input] wcaps 0x140311: Stereo Digital PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Connection: 1 0x11 Node 0x0a [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173f: IN OUT HP Detect Pin Default 0x2221401f: [Jack] HP Out at Sep Front Conn = 1/8, Color = Green Pin-ctls: 0xc0: OUT HP Connection: 1 0x02 Node 0x0b [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Detect Pin Default 0x22a19020: [Jack] Mic at Sep Front Conn = 1/8, Color = Pink Pin-ctls: 0x24: IN Connection: 1 0x04 Node 0x0c [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Detect Pin Default 0x01119011: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Pink Pin-ctls: 0x40: OUT Connection: 1 0x03 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173f: IN OUT HP Detect Pin Default 0x01114010: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Green Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x0e [Pin Complex] wcaps 0x400081: Stereo Pincap 0x0824: IN Detect Pin Default 0x40f000f1: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x20: IN Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0837: IN OUT Detect Pin Default 0x01113012: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Blue Pin-ctls: 0x40: OUT Connection: 1 0x05 Node 0x10 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x01451130: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Black Pin-ctls: 0x40: OUT Connection: 3 0x08* 0x17 0x19 Node 0x11 [Pin Complex] wcaps 0x430681: Stereo Digital Pincap 0x0810024: IN EAPD Detect Pin Default 0x40f000f2: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Power: 0x0 Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 7 0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 7 0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00] Node 0x15 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x9033012e: [Fixed] CD at Int N/A Conn = ATAPI, Color = Unknown Pin-ctls: 0x20: IN Node 0x16 [Volume Knob Widget] wcaps 0x600000: Mono Node 0x17 [Audio Selector] wcaps 0x300903: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x80 0x80] Connection: 1 0x12 Node 0x18 [Audio Selector] wcaps 0x300903: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x80 0x80] Connection: 1 0x13 Node 0x19 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital Node 0x1a [Audio Output] wcaps 0x30201: Stereo Digital Node 0x1b [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x40f000f3: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Connection: 1 0x1a Link to comment Share on other sites More sharing options...
futurcorerock Posted February 2, 2008 Share Posted February 2, 2008 ALC862 on Toshiba A135 still not working Is this fix being ignored for the non-Lenovo crowd? Link to comment Share on other sites More sharing options...
Taruga Posted February 2, 2008 Author Share Posted February 2, 2008 Those of you that tested HDAudio.kext (for codec detection) available here please, test it again with version 6 of the kext. I need to make sure if it detects codecs at address <> 0 . Thanks for your help Link to comment Share on other sites More sharing options...
lapoltba Posted February 2, 2008 Share Posted February 2, 2008 hi, Ive been playing with Leopard 10.5.1 for a few weeks now and its pretty sweet. I have a badaxe2 board and everything seems to work perfectly except the sound. I have followed alot of thie posts on the baord and tried using the applehda patcher V1.20 with some different posted codec dumps and none worked. i have also used my ubuntu cd to make my own dump and still the sound does not work. i will attach a copy of the codec dump i made and the text fromt he hda patcher in hopes that someone can point me in the right direction. Thanks. -Brian- codecdump.txt hda_patcher_text.rtf Link to comment Share on other sites More sharing options...
Recommended Posts