Jump to content

Helps to create correct dsdt for my hardware


dark_hacker
 Share

59 posts in this topic

Recommended Posts

I have the macOS sierra 10.12.6 installed, I have graphs 1st generation installed the kexts following the guide http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/tengo but in some parts of the system I have some distortions from what I saw in the guide nobody had this problem.

I think it may be the settings of my clover and dsdt that are not correct, I leave attached the dsdt extracted from the clover and the current clover settings.

I also do not know if the power system is working properly because in sleep mode the screen does not turn black

 

Config

 

CPU: Core i5 460M

Memory: 6 GB

Graphics: Intel HD Graphics 1st + ATI Radeon 5470 1GB

files.zip

Link to comment
Share on other sites

I have not tried do not know how to disable an intel to work only with ati

Try this config.plist

 

 

EDIT ****

what is the revision Clover you have?

Edit *** config remove 

Link to comment
Share on other sites

Revision Clover_v2.4k_r4243

 

with this config give kernal panic

Post picture of KP  in verbose mode please

what is the Motherboard?

 

EDIT ***

Did you plug the screen to the DVI or HDMI port of the Graphics card?, not to the IGPU Motherboard

Link to comment
Share on other sites

Post picture of KP  in verbose mode please

what is the Motherboard?

 

EDIT ***

Did you plug the screen to the DVI or HDMI port of the Graphics card?, not to the IGPU Motherboard

 

And a laptop model g62-a40sp the only difference and the original processor well an i3 and i put an i5 460M i did not connect an external screen this on the screen of the internal laptop but if it achieves by an operation the hdmi was perfect if it does not do not hurt.

 

Image:

 

https://imgur.com/E1XEcrj

Link to comment
Share on other sites

And a laptop model g62-a40sp the only difference and the original processor well an i3 and i put an i5 460M i did not connect an external screen this on the screen of the internal laptop but if it achieves by an operation the hdmi was perfect if it does not do not hurt.

 

Image:

 

https://imgur.com/E1XEcrj

Ha ok its a Laptop  ATI Mobility Radeon HD 5470

I was a post in the PC section and I did not notice you were in the Laptop section , my bad Sorry  :angel_not:

Try this config one by one , rename config.plist before change

 

Edit ***config correction

config.zip

Link to comment
Share on other sites

Do you want me to test or to do something ?

Disable ATI and Enable Intel, disable edid

and boot

 

You can change this in config.plist manually if you need in Graphics 

You have now a config working in progress  :P 

Link to comment
Share on other sites

Disable ATI and Enable Intel, disable edid

and boot

 

You can change this in config.plist manually if you need in Graphics 

You have now a config working in progress  :P 

 

I did this with intel enabled and you disabled it did boot correctly on the desktop

Link to comment
Share on other sites

I did this with intel enabled and you disabled it did boot correctly on the desktop

So now you have a working config.plist

You can change this in config.plist manually if you need in Graphics 

 

<key>Graphics</key>
<dict>
 
<key>Intel</key>
<true/>
 

 

Follow the Guide exactly for Arandale CPU thats the trick for you  :wink_anim: 

 

Edit ** 2

what ATI shows in about this mac in Graphics

Link to comment
Share on other sites

So now you have a working config.plist

You can change this in config.plist manually if you need in Graphics 

 

<key>Graphics</key>
<dict>
 
<key>Intel</key>
<true/>
 

 

Follow the Guide exactly for Arandale CPU thats the trick for you  :wink_anim: 

 

Edit ** 2

what ATI shows in about this mac in Graphics

 

I followed the tutorial several times more than always or even I tried it in several ways it could not solve I do not know what is missing but for a part of the dsdt that is not much more there is nothing to be? Now I do not have wifi to work. Can you give me a hand? and in the matter of the graph if you power grateful.

because even without intel activated without clover a graph works in the same.

 

Image with the default

 

https://imgur.com/sihn49b

https://imgur.com/jxtLkn2

https://imgur.com/tAzhh2G

 

Problem

 

https://imgur.com/UTuoIss

Link to comment
Share on other sites

I followed the tutorial several times more than always or even I tried it in several ways it could not solve I do not know what is missing but for a part of the dsdt that is not much more there is nothing to be? Now I do not have wifi to work. Can you give me a hand? and in the matter of the graph if you power grateful.

because even without intel activated without clover a graph works in the same.

 

Image with the default

 

https://imgur.com/sihn49b

https://imgur.com/jxtLkn2

https://imgur.com/tAzhh2G

 

Problem

 

https://imgur.com/UTuoIss

Ok wait for the Graphics Fix I send a Private message in my friend with a  a working laptop config Arandale 

What is the WIFI card?

Link to comment
Share on other sites

I see Nothing for your Wifi sorry

May be my freind post here soon for the Graphics  :)

OK , i'm the friend of CHRIS :)

See attached file

for config.plist - kexts 10.13 clover - kexts in S/L/E 

for wifi i use a usb key GO-USB-N150

my laptop is an ACER ASPIRE 5733 

good hack  :thumbsup_anim:

ACER ARRANDALE .zip

  • Like 1
Link to comment
Share on other sites

OK , i'm the friend of CHRIS :)

See attached file

for config.plist - kexts 10.13 clover - kexts in S/L/E 

for wifi i use a usb key GO-USB-N150

my laptop is an ACER ASPIRE 5733 

good hack  :thumbsup_anim:

Thank you @arcade33  :)

May be This Wifi  working for her Laptop ?

Acer Atheros AR5B193

Link to comment
Share on other sites

 Share

×
×
  • Create New...