#21
Posted 17 October 2007 - 02:58 AM
sudo su
chown -R /System/Library/Extensions2/AppleBCM5751Ethernet.kext
chmod -R 755 /System/Library/Extensions2/AppleBCM5751Ethernet.kext
kextload /System/Library/Extensions2/AppleBCM5751Ethernet.kext
diskutil repair permissions
# vi /etc/rc.local
sudo ifconfig en0 ether [your MAC address]
sudo ipconfig set en0 BOOTP
sudo ipconfig set en0 DHCP
4. reboot
in network preferences, set DHCP with manual IP,
let me know how it works for you
still need sleep, speedstep and booth cores and fan control, oops one more touchpad scrolling
#22
Posted 02 November 2007 - 09:35 AM
Except:
Boot from sleep mode that crashes, looking for powermanager fix,
Wireless not Supported yet.
#23
Posted 02 November 2007 - 03:03 PM
almost everything,.... update
first, thanks blue traveler for posting,...
R60 update ,- uphuck 10.4.9 v3, core duo
not working
- sound broken ad1981 hd, due 802.11n airportenabler
- use usb sound adapter, headphones
- screen brightness, not adjustable, have to use shades
- gigabit lan, needs heavy mod to get to work
- speedstep , crashes with booth cores
- no sleep / wake
- no fan control
- macdotnub 10.4.10 not able to install yet, at all, 4 tries
- bluetooth not working, did get the module, but it's not recognized
- gma 950, did get messed up, once, with mirror, and had to use vga dongle
- no build in firewire on this one
- vmware beta, not supported 3D graphics ?
what's working:
- gma 950
- atheros wifi draft N
- booth cores , no throttle
- usb,
- second disc in bay
- express slot, with firewire 800, and esata card
- gigabit lan
- thinklight
- ultranav (red dot)
Leopard anybody ? R61 ?
anybody knows, if there is an difference between , core 2 duo, and core duo running osx ?
not talking speed, but compatibility issues
please post yours
#24
Posted 13 November 2007 - 01:16 PM
But for my four Thinkpads, it´s a no go at the moment.
My T61 won´t even boot. Right after bootloader it gives a kernel panic and that´s that. The old T41 boots to the point where it would enter graphic mode and then nothing. All black screen.
Later this week I will try an old X40 and a brand new X60 tablet as well
-KJ
#25
Posted 15 November 2007 - 10:26 PM
please post your results !!
what's promising,... with EFI, that sleep and throttle work,...
and with the new X3100 the graphics ,....
for me, I'll wait till the ioatkas uphuck is released
if the new Imac's had upgradeable graphics cards,
it would make a switch so much easier,.....
#26
Posted 22 November 2007 - 08:26 PM
IBM T41 type 2373:
Kalyway 10.4.10 installs without a hitch if you deselect all HW patches not needed. Sound and integrated ethernet works right after install. Tried a lot to get the Intel 2200BG and the ATi Mobility Radeon 7500 to work, but to no avail. Gave up.
IBM X40:
Kalyway 10.4.10 works like with the T41. Older Intel GFX, couldn't find any drivers for it, so no accelerated GFX. Intel PRO 2100 wireless: No go.
IBM / Lenovo X60 tablet:
ToH Leopard installed OK. Accelerated GFX and integrated ethernet works after installing, but audio was hard to fix. Used the Conexant HD patch to enable 2 ch internal speakers. Installed EFI and vanilla 10.5 kernel. Then made a backup of the framebuffer kext and upgraded to 10.5.1. Rebooted in singleuser and replaced the failing new framebuffer kext. Works very good now with both cores enabled, but still no wireless. Have ordered an Atheros original wifi to replace the Intel.
Lenovo T61:
ToH Leopard installs when you enable the "-legacy" switch to force it to use 32 bit kernel. Nothing at all works after installing. Wrong resolution, no internal ethernet, no accelerated GFX, no audio, no wireless. Did not bother spending to much time on it as my X60 works so well.
All machines will hang if you let the sleep timer kick in, so I disabled it. I also find that Safari is kinda unstable, so I use Opera in stead.
I will be back with more after I test them a little more, but I'm very surprised to see that my old X40 runs even better than with Ubuntulinux.
-KJ
#27
Posted 23 November 2007 - 02:11 AM
Except:
pcmcia (looking fot fix)
Boot from sleep mode that crashes, looking for powermanager fix,
Wireless not Supported yet.
#28
Posted 23 November 2007 - 06:20 PM
Tried different releases on several machines here and so far the best fit was the ToH RC2 which runs very nice on a Lenovo 3000 N100, and from which I am posting this.
-KJ
Sorry for bumping an old thread.
We agree that ToH RC2 is Leopard, right? I'm writing from a 3000 N100 my self, but I fail to understand how Leopard can run very nicely with only 512MB of RAM?
And do you have any experience with Tiger on the N100?
#29
Posted 26 November 2007 - 07:50 PM
I never bothered trying Tiger on it, so I´m sorry but I can´t help you there...
-KJ
#30
Posted 26 November 2007 - 11:01 PM
Now I've been testing different releases and tweaks on my many ThinkPads here, and these are my findings:
IBM T41 type 2373:
Kalyway 10.4.10 installs without a hitch if you deselect all HW patches not needed. Sound and integrated ethernet works right after install. Tried a lot to get the Intel 2200BG and the ATi Mobility Radeon 7500 to work, but to no avail. Gave up.
IBM X40:
Kalyway 10.4.10 works like with the T41. Older Intel GFX, couldn't find any drivers for it, so no accelerated GFX. Intel PRO 2100 wireless: No go.
IBM / Lenovo X60 tablet:
ToH Leopard installed OK. Accelerated GFX and integrated ethernet works after installing, but audio was hard to fix. Used the Conexant HD patch to enable 2 ch internal speakers. Installed EFI and vanilla 10.5 kernel. Then made a backup of the framebuffer kext and upgraded to 10.5.1. Rebooted in singleuser and replaced the failing new framebuffer kext. Works very good now with both cores enabled, but still no wireless. Have ordered an Atheros original wifi to replace the Intel.
Lenovo T61:
ToH Leopard installs when you enable the "-legacy" switch to force it to use 32 bit kernel. Nothing at all works after installing. Wrong resolution, no internal ethernet, no accelerated GFX, no audio, no wireless. Did not bother spending to much time on it as my X60 works so well.
All machines will hang if you let the sleep timer kick in, so I disabled it. I also find that Safari is kinda unstable, so I use Opera in stead.
I will be back with more after I test them a little more, but I'm very surprised to see that my old X40 runs even better than with Ubuntulinux.Now all I need is speedstep and wireless!
-KJ
KJ, Thanks for the information. I'm trying to rehab an old x40 with JAS 10.4.6. So far it's been abysmally slow through 1 failed install and i'm working on the second. its a pent m unit 1ghz with 512 ram. How's the rest of the install going? What's the remedy for the slow speed?
Thanks in advance from newbyville.
#31
Posted 30 December 2007 - 08:38 PM
#32
Posted 18 January 2008 - 12:59 AM
#33
Posted 20 January 2008 - 06:33 AM
I would really apreciate it if anyone can help me install ANY version of osx86 on my x61. I tried using the 10.5 leopard flat image but it just froze on startup.any X61 out there?
BTW. Here are my stats Intel core 2 duo L7500 @ 1.60 ghz "merom". Lenovo 7764CTO mobo
,Intel GM965 chipset,Intel 82801HBM (ICH8-M) southbridge, 2gb ddr2 ram.Any help would be greatly ap.preciated
#34
Posted 20 January 2008 - 05:30 PM
iCyclone
Fan Control 1.1
#35
Posted 01 February 2008 - 03:36 PM
X61 sleep wake, iatkos, efi, guid,-> http://forum.thinkpa...pic.php?t=56369
R60 -> kalyway, EFI, mbr, F8 vanilla, boot from battery, sleep works, wake from battery,
crashes, on power adapter,
- no speedstep, battery meter funky,
- fan always running, no fan control
#36
Posted 01 February 2008 - 08:48 PM
Haven't started to work on my ATI video card yet. I was trying to make my wifi working first, but no luck till now.
Yesterday I finally got connected with Internet via build-in ethernet card, thanks to this post
http://forum.insanel...&...ost&p=97291
My TP-link wireless card is flashing at this moment - will try to solve the wireless issue next day.
#37
Posted 24 August 2008 - 09:25 AM
#38
Posted 13 September 2008 - 11:46 PM
finally after a weekend of slaving away and scouring these forums, have a working leopard install on my Thinkpad T61 using kalyway 10.5.2. used the vanilla kernel only and checked both video drivers for the intel chip in the install customization. everything else was default.
System Specs:
CPU: Intel Core 2 Duo 2.2 Ghz
RAM: 2 GB
HD: Hitachi 120 GB
Audio: Intel HD Audio, AD1984
Graphics: Intel GMA X3100
Wireless: Thinkpad 802.11 a/b/g Wi-Fi
resolution (1400x900) worked right away as did touchpad and trackpad. volume slider as well.
Used following guides:
Wireless: http://forum.insanel...&...st&p=238508 (still have to connect using network diagnostics every time i boot up)
Ethernet: http://techresearchinfo.blogspot.com/
Video: http://forum.insanel...&...st&p=763465 (did not have to use sleep hot corner trick)
Audio: http://0xfeedbeef.com/osx86/ (headphone jack still not working, have not tested audio inputs)
Battery Meter: http://forum.insanel...howtopic=114105
also installed fingerprint reader from upek: http://www.upek.com/mac/download/
Biggest issue I still have is brightness control. It automatically sets it to the highest and drains my 6 cell battery in 1-1.5 hours. any fixes?
i still have issues with the webcam (only works when i take my account picture, never for apps like ichat, skype, photobooth etc)
Sleep is also not working properly
#39
Posted 18 September 2008 - 11:05 AM
I could login using GHOST, but almost 2 hours is needed for there is no drivers when I install it. R52 or T40...which have intel chinpest is easy to success.
#40
Posted 27 September 2008 - 08:01 AM
I have a lenovo T60 with kalyway 10.5.2 running the most of the issues about networking i have read it and doesn't work.
I have some questions about the pcmcia cardbus on my T60 i have a Texas Instruments PCI-1410 Cardbus i wanna have it installed and working but i can't find the best solution for it.
I have a dell wireless card and i wanna have my cardbus working to test the wireless card.
I am new to OSX and have some questions about kext files i can't see how to install those files, is it just replacing the old kext files and where must i put the new kext files.
I hope someone can give answer to my questions
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users



Sign In
Create Account







