Kernel Panic for VMware / CPU is Disabled by the Guest Operating System

[TechieMac]

Hello, I am attempting to setup a Virtual Machine for Mac Os Sierra and I am having some trouble setting up the operating system to boot on VMware. I had already tried CPU masking which made the kernel panic on the picture and without says the CPU is Disable by the Guest Operating System. I had tried researching this problem but everything dates back to Snow Leopard or it does not work for me. 
 
Specs:
Intel Q6600 
4 Gbs Ram
P5G41T-M LX PLUS Motherboard
GTX 1050 Ti
 
Vmx file:

.encoding = "windows-1252"
config.version = "8"
virtualHW.version = "12"
numvcpus = "2"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsilogic"
sata0.present = "TRUE"
memsize = "2048"
sata0:0.present = "TRUE"
sata0:0.fileName = "H:\Copy of macOS 10.12 Sierra Final by TechReviews\macOS 10.12 Sierra Final by TechReviews\macOS 10.12 Sierra Final by TechReviews.vmdk"
sata0:1.present = "TRUE"
sata0:1.autodetect = "TRUE"
sata0:1.deviceType = "cdrom-raw"
ethernet0.present = "TRUE"
ethernet0.connectionType = "nat"
ethernet0.virtualDev = "e1000e"
ethernet0.wakeOnPcktRcv = "FALSE"
ethernet0.addressType = "generated"
usb.present = "TRUE"
ehci.present = "TRUE"
ehci.pciSlotNumber = "34"
usb_xhci.present = "TRUE"
sound.present = "TRUE"
sound.virtualDev = "hdaudio"
sound.fileName = "-1"
sound.autodetect = "TRUE"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
smc.present = "TRUE"
hpet0.present = "TRUE"
ich7m.present = "TRUE"
usb.vbluetooth.startConnected = "TRUE"
board-id.reflectHost = "TRUE"
firmware = "efi"
displayName = "macOS 10.12"
guestOS = "darwin16-64"
nvram = "macOS 10.12.nvram"
virtualHW.productCompatibility = "hosted"
gui.exitOnCLIHLT = "FALSE"
powerType.powerOff = "soft"
powerType.powerOn = "soft"
powerType.suspend = "soft"
powerType.reset = "soft"
extendedConfigFile = "macOS 10.12.vmxf"
floppy0.present = "FALSE"
numa.autosize.vcpu.maxPerVirtualNode = "2"
numa.autosize.cookie = "20001"
uuid.bios = "56 4d bf af 99 14 8e 4e-e3 2b 3f e0 c1 06 22 ce"
uuid.location = "56 4d bf af 99 14 8e 4e-e3 2b 3f e0 c1 06 22 ce"
migrate.hostlog = ".\macOS 10.12-176eaa87.hlog"
sata0:0.redo = ""
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "16"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "160"
sound.pciSlotNumber = "33"
usb_xhci.pciSlotNumber = "192"
vmci0.pciSlotNumber = "35"
sata0.pciSlotNumber = "36"
ethernet0.generatedAddress = "00:0c:29:06:22:ce"
ethernet0.generatedAddressOffset = "0"
vmci0.id = "-1056562482"
monitor.phys_bits_used = "42"
vmotion.checkpointFBSize = "33554432"
vmotion.checkpointSVGAPrimarySize = "33554432"
cleanShutdown = "FALSE"
softPowerOff = "FALSE"
smc.version = "0"

 

Edited September 4, 2017 by Allan
Spoiler tag added

[Huy9653]

Try change guest OS from 10.12 to 10.8. Hope this help

[isik_alexander]

On 9/9/2017 at 9:25 PM, Huy9653 said:

Try change guest OS from 10.12 to 10.8. Hope this help

 

Thanks a million! This helped me. 

 

[tenhow]

Thanks a million a million a million a million! This also helped me.

[jamesrober]

For that my suggestion is that you just reset the device and after that, you will use it properly. Also, I used Hp printer with this system. Also, I have error code oxc4eb827f, just share this for your help.