Jump to content

Please Help - Sony Vaio VPCEH2M1R - Settings Clover and DSDT

sony vaio clover dsdt sierra hackintosh sandybridge hd3000

  • Please log in to reply
5 replies to this topic

#1
artkondrashov

artkondrashov

    InsanelyMac Protégé

  • Members
  • Pip
  • 4 posts

Hi My name is Vova :) please help me settings clover and dsdt tabel for laptop..

 

Installed version of the system OS X 10.12.5

 

Does not work:

1. Mouse treckpad (no multipad), usb mouse Work;

2. After Sleep mode, not work Audio and Micro, before sleep mode Audio and Mic true;

3. Battery It works then does not work;

4. This poppy does not open because of SMBios;

5. The hotkeys of the backlight do not work;

 

 

Thank you dear friend that did not pass by :)

 

 

Here is a system dump, laptop data, a clover data.... in file check..

 

Motherboard: Intel Cougar Point HM65, Intel Sandy Bridge

CPU: Mobile QuadCore Intel Core i7-2670QM, 3000 MHz (30 x 100) CPU @ 2.20GHz
Video adapter: Intel HD Graphics 3000

 

IDE Controller: Standard SATA AHCI Controller

WIFI network adapter: Atheros AR9285 Wireless Network Adapter
Ethernet network adapter: Realtek PCIe GBE Family Controller

Audio Adapter: Conexant Cx20590 @ Intel Cougar Point PCH - High Definition Audio Controller [B-2]
Audio Adapter: Intel Cougar Point HDMI @ Intel Cougar Point PCH - High Definition Audio Controller [B-2]

 

 

Attached Files



#2
Hervé

Hervé

    InsanelyMacaholic

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 2,935 posts
  • Gender:Male
  • Location:Rennes, BZH of course!

Try this Clover config instead:

Attached File  config.plist.zip   4.43KB   2 downloads

 

Added ACPI patches for USB devices (change EHCx to EH0x), injected Intel SNB graphics for laptops and set SMBIOS to MBP8,2.

 

Remove the following kexts:

  • CoreDisplayDixup
  • EnableLidWake
  • HibernationFixup
  • IntelGraphicsDixup
  • LegacyAtheros

 

AR9285 (168c,2b) will simply require a small DSDT patch to declare the device compatible with a model supported OOB such as AR9380 (168c,30).

http://forum.osxlati...wireless-cards/

Alternatively, you can patch the Atheros kext to add the device id but that'll be needed again after each update. Or you can use Clover to inject this too.



#3
artkondrashov

artkondrashov

    InsanelyMac Protégé

  • Members
  • Pip
  • 4 posts

Thank you very much for your understanding


Try this Clover config instead:

attachicon.gifconfig.plist.zip

 

Added ACPI patches for USB devices (change EHCx to EH0x), injected Intel SNB graphics for laptops and set SMBIOS to MBP8,2.

 

Remove the following kexts:

  • CoreDisplayDixup
  • EnableLidWake
  • HibernationFixup
  • IntelGraphicsDixup
  • LegacyAtheros

 

AR9285 (168c,2b) will simply require a small DSDT patch to declare the device compatible with a model supported OOB such as AR9380 (168c,30).

http://forum.osxlati...wireless-cards/

Alternatively, you can patch the Atheros kext to add the device id but that'll be needed again after each update. Or you can use Clover to inject this too.

 

Pleas my DSDT Path for Atheros AR9285 I'm not a pro, Thank you

 

 

 

 

 



#4
Hervé

Hervé

    InsanelyMacaholic

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 2,935 posts
  • Gender:Male
  • Location:Rennes, BZH of course!

I'm not a pro either. I would need an IOReg output to be able to identify the device used fo your wireless card and patch the DSDT accordingly. Please run IORegistryExplorer, save the output and post a compressed copy of it.

 

NB: no need to quote messages to directly reply to...



#5
artkondrashov

artkondrashov

    InsanelyMac Protégé

  • Members
  • Pip
  • 4 posts

I'm not a pro either. I would need an IOReg output to be able to identify the device used fo your wireless card and patch the DSDT accordingly. Please run IORegistryExplorer, save the output and post a compressed copy of it.
 
NB: no need to quote messages to directly reply to...

MacBook Pro — artkondrashov



Try this Clover config instead:
attachicon.gifconfig.plist.zip
 
Added ACPI patches for USB devices (change EHCx to EH0x), injected Intel SNB graphics for laptops and set SMBIOS to MBP8,2.
 
Remove the following kexts:

  • CoreDisplayDixup
  • EnableLidWake
  • HibernationFixup
  • IntelGraphicsDixup
  • LegacyAtheros
AR9285 (168c,2b) will simply require a small DSDT patch to declare the device compatible with a model supported OOB such as AR9380 (168c,30).
http://forum.osxlati...wireless-cards/
Alternatively, you can patch the Atheros kext to add the device id but that'll be needed again after each update. Or you can use Clover to inject this too.

 

BAD Config Panic.... 
 
DEBUG

 
0:100  0:100  MemLog inited, TSC freq: 2195018149
0:100  0:000  LegacyRegion2: Chipset/proc: 0x01048086
0:100  0:000   Next Generation Core processors (PAM 0x80-0x86)
0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01048086
0:100  0:000  , Install = Success
0:119  0:019  BiosVideoDriverBindingStart!
0:119  0:000  BiosVideoCheckForVbe
0:119  0:000  EdidOverride not found
0:131  0:012   Edid1+
0:131  0:000   found Detail Timing 1366x768
0:131  0:000  timing string after 0xFE:LG Display
  
0:131  0:000  timing string after 0xFE:LP156WH4-TLA1
0:143  0:012   Edid0+
0:143  0:000   found Detail Timing 1366x768
0:143  0:000  ... already present
0:143  0:000  timing string after 0xFE:LG Display
  
0:143  0:000  timing string after 0xFE:LP156WH4-TLA1
0:143  0:000     0 1366x768 attr=9B - ok, edid+, working, highest, pref=0
0:144  0:000     1 1024x768 attr=9B - ok, edid-, 1024x768, working
0:144  0:000     2 640x480 attr=9B - ok, edid-, 640x480, working
0:144  0:000     3 800x600 attr=9B - ok, edid-, 800x600, working
0:144  0:000  BV new mode: 0 1366x768
0:287  0:142   SetMode pref 0 (0) = Success
1:884  1:597  
1:884  0:000  Now is 25.8.2017,  5:59:11 (GMT)
1:884  0:000  Starting Clover revision: 4173 on CLOVER EFI
1:884  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.6 | XCODE: 8.3.3]
1:884  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,172E3A87-EBFB-458E-8050-AA1DDD094676,0x28,0x64000) @BC02C998
1:884  0:000  SelfDirPath = \EFI\CLOVER
1:884  0:000  === [ Get Smbios ] ========================================
1:884  0:000  Type 16 Index = 0
1:884  0:000  Total Memory Slots Count = 2
1:884  0:000  Type 17 Index = 0
1:884  0:000  Ignoring insane frequency value 20307MHz
1:884  0:000  SmbiosTable.Type17->Speed = 0MHz
1:884  0:000  SmbiosTable.Type17->Size = 4096MB
1:884  0:000  SmbiosTable.Type17->Bank/Device = Bank 0 SODIMM1
1:884  0:000  SmbiosTable.Type17->Vendor = 
1:884  0:000  SmbiosTable.Type17->SerialNumber = 
1:884  0:000  SmbiosTable.Type17->PartNumber = 
1:884  0:000  Type 17 Index = 1
1:884  0:000  Ignoring insane frequency value 20307MHz
1:884  0:000  SmbiosTable.Type17->Speed = 0MHz
1:884  0:000  SmbiosTable.Type17->Size = 1024MB
1:884  0:000  SmbiosTable.Type17->Bank/Device = Bank 1 SODIMM2
1:884  0:000  SmbiosTable.Type17->Vendor = 
1:884  0:000  SmbiosTable.Type17->SerialNumber = 
1:884  0:000  SmbiosTable.Type17->PartNumber = 
1:884  0:000  Boot status=0
1:884  0:000  Running on: 'Reserved' with board 'VAIO'
1:884  0:000  === [ GetCPUProperties ] ==================================
1:884  0:000  CPU Vendor = 756E6547 Model=206A7
1:884  0:000   The CPU supported SSE4.1
1:884  0:000   The CPU supported turbo
1:884  0:000  BrandString = Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
1:884  0:000  MSR 0xE2 before patch 1E008404
1:884  0:000  MSR 0xE2 is locked, PM patches will be turned on
1:884  0:000  MSR 0xCE              00000800_60011600
1:884  0:000  MSR 0x1A0             00850089
1:884  0:000  MSR 0x1B0             00000000
1:884  0:000  FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
1:884  0:000  MaxDiv/MinDiv: 22.0/8
1:884  0:000  Turbo: 28/28/30/31
1:884  0:000  Features: 0xBFEBFBFF
1:884  0:000  Threads: 8
1:884  0:000  Cores: 4
1:884  0:000  FSB: 100 MHz
1:884  0:000  CPU: 2200 MHz
1:884  0:000  TSC: 2200 MHz
1:884  0:000  PIS: 100 MHz
1:884  0:000  ExternalClock: 25 MHz
1:884  0:000  === [ GetDevices ] ========================================
1:884  0:000  PCI (00|00:00.00) : 8086 0104 class=060000
1:884  0:000  PCI (00|00:02.00) : 8086 0116 class=030000
1:884  0:000   - GFX: Model=Intel HD Graphics 3000 (Intel)
1:884  0:000  PCI (00|00:16.00) : 8086 1C3A class=078000
1:884  0:000  PCI (00|00:1A.00) : 8086 1C2D class=0C0320
1:884  0:000  PCI (00|00:1B.00) : 8086 1C20 class=040300
1:884  0:000  PCI (00|00:1C.00) : 8086 1C10 class=060400
1:885  0:000  PCI (00|07:00.00) : 168C 002B class=028000
1:885  0:000   - WIFI: Vendor=Atheros
1:885  0:000  PCI (00|00:1C.03) : 8086 1C16 class=060400
1:885  0:000  PCI (00|0D:00.00) : 10EC 5209 class=FF0000
1:885  0:000  PCI (00|00:1C.05) : 8086 1C1A class=060400
1:885  0:000  PCI (00|13:00.00) : 10EC 8168 class=020000
1:885  0:000   - LAN: 0 Vendor=Realtek
1:885  0:000  PCI (00|00:1D.00) : 8086 1C26 class=0C0320
1:885  0:000  PCI (00|00:1F.00) : 8086 1C49 class=060100
1:885  0:000  PCI (00|00:1F.02) : 8086 1C03 class=010601
1:885  0:000  PCI (00|00:1F.03) : 8086 1C22 class=0C0500
1:885  0:000  === [ GetDefaultSettings ] ================================
1:885  0:000  Clover load options size = 0 bytes
1:916  0:031  EFI\CLOVER\config.plist loaded: Success
1:916  0:000  === [ GetListOfThemes ] ===================================
1:929  0:012  - [00]: embedded
1:929  0:000  - [00]: ios7
1:936  0:006  - [01]: metal
1:951  0:015  - [02]: random
1:952  0:001  === [ Found config plists ] ===============================
1:952  0:000  - config.before.plist
1:952  0:000  - config.plist
1:965  0:012  === [ GetEarlyUserSettings ] ==============================
1:965  0:000  timeout set to 5
1:965  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
1:972  0:007  KextsToPatch: 3 requested
1:976  0:003   - [00]: IOGraphicsFamily (Intel HD #1: patch boot logo 10.10.x - 10.11.x) :: BinPatch :: data len: 5
1:986  0:010   - [01]: AppleIntelSNBGraphicsFB (10.9/SNB/Port 05/DP>HDMI) :: BinPatch :: data len: 12
1:996  0:010   - [02]: AppleIntelSNBGraphicsFB (10.9/SNB/Port 06/DP>HDMI) :: BinPatch :: data len: 12
2:009  0:012  Default theme: embedded
2:011  0:002  === [ LoadDrivers ] =======================================
2:117  0:106  Loading AppleImageCodec-64.efi  status=Success
2:126  0:008  Loading AppleKeyAggregator-64.efi  status=Success
2:133  0:007  Loading AppleUITheme-64.efi  status=Success
2:141  0:007  Loading FirmwareVolume-64.efi  status=Success
2:149  0:007  Loading FSInject-64.efi  status=Success
2:157  0:007  Loading Ps2MouseDxe-64.efi  status=Success
2:168  0:011   - driver needs connecting
2:171  0:002  Loading SMCHelper-64.efi  status=Success
2:179  0:007  Loading UsbMouseDxe-64.efi  status=Success
2:186  0:007   - driver needs connecting
2:189  0:002  2 drivers needs connecting ...
2:192  0:002  PlatformDriverOverrideProtocol->GetDriver overriden
2:337  0:145  === [ InitScreen ] ========================================
2:448  0:110  SetScreenResolution: 1280x1024 - not found!
2:460  0:011  Console modes reported: 4, available modes:
2:464  0:004   - [01]: 80x25
2:467  0:002   - [03]: 100x31
2:470  0:002   - [04]: 170x40 (current mode)
2:472  0:002  SetScreenResolution: 1366x768 - already set
2:478  0:005  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,172E3A87-EBFB-458E-8050-AA1DDD094676,0x28,0x64000)
2:481  0:003  Using embedded font: Success
2:485  0:004  === [ GetMacAddress ] =====================================
2:588  0:102  === [ ScanSPD ] ===========================================
2:709  0:121  SMBus device : 8086 1C22 class=0C0500 status=Success
2:712  0:002  SMBus CmdReg: 0x3
2:714  0:002  Scanning SMBus [8086:1C22], mmio: 0xD2605004, ioport: 0x4040, hostc: 0x1
2:717  0:002  Slots to scan [8]...
2:720  0:003  SPD[0]: Type 11 @0x50
2:742  0:021  Not using XMP because it is not present
2:744  0:002  DDR speed 1600MHz
2:747  0:002  Slot: 0 Type 24 4096MB 1600MHz Vendor=Hynix Semiconductor PartNo=HMT451S6AFR8A-PBN0 SerialNo=0001030406090700
2:752  0:005  SPD[2]: Type 11 @0x52
2:774  0:021  Not using XMP because it is not present
2:776  0:002  DDR speed 1333MHz
2:779  0:002  Slot: 2 Type 24 1024MB 1333MHz Vendor=Hynix Semiconductor PartNo=HMT112S6TFR8C-H9N0 SerialNo=050A02040F030901
2:782  0:003  === [ GetAcpiTablesList ] =================================
2:878  0:095  Get Acpi Tables List from RSDT:
2:883  0:005   - [00]: FACP  VAIO len=244
2:885  0:002   - [01]: ASF!  VAIO len=165
2:888  0:002   - [02]: HPET  VAIO len=56
2:891  0:002   - [03]: APIC  VAIO len=140
2:895  0:004   - [04]: MCFG  VAIO len=60
2:898  0:002   - [05]: SLIC  VAIO len=374
2:901  0:002   - [06]: WDAT  VAIO len=548
2:904  0:002   - [07]: SSDT  VAIO len=4200
2:906  0:002   - [08]: BOOT  VAIO len=40
2:909  0:002   - [09]: ASPT  VAIO len=52
2:911  0:002   - [10]: SSDT  VAIO len=2382
2:914  0:002   - [11]: SSDT  VAIO len=2454
2:917  0:002  Calibrated TSC Frequency = 2195018149 = 2195MHz
2:920  0:003  === [ GetUserSettings ] ===================================
3:022  0:102  Add 2 devices:
3:025  0:002   - [00]: [00:02.00]  (Inject Intel HD properties)
3:035  0:010   - [01]: [00:16.00]  (Inject IMEI properties)
3:046  0:010  USB FixOwnership: yes
3:048  0:002  Dropping 3 tables:
3:051  0:002   - [00]: Drop table  signature="DMAR" (52414D44)
3:072  0:020           - set table: 52414D44,                0 to drop: no
3:077  0:005   - [01]: Drop table  signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
3:116  0:039           - set table: 54445353,       6D50757043 to drop: no
3:125  0:008   - [02]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
3:170  0:044           - set table: 54445353,   74734930757043 to drop: no
3:175  0:005   - final DSDT Fix mask=07068051
3:178  0:002  PatchesDSDT: 3 requested
3:180  0:002   - [00]: (Rename GFX0 to IGPU) lenToFind: 4, lenToReplace: 4
3:191  0:010   - [01]: (change EHC1 to EH01) lenToFind: 4, lenToReplace: 4
3:201  0:010   - [02]: (change EHC2 to EH02) lenToFind: 4, lenToReplace: 4
3:214  0:012  PluginType: 0
3:217  0:003  Use latest BiosVersion from clover
3:220  0:002  BiosVersion: MBP81.88Z.004D.B00.1708080655
3:223  0:002  BiosReleaseDate: 08/08/17
3:225  0:002  ChassisType: 0xA
3:228  0:002  FirmwareFeatures: 0xC00DE137
3:231  0:002  FirmwareFeaturesMask: 0xFFFFFFFF
3:233  0:002  PlatformFeature: 0xFFFF
3:236  0:002  Converted CustomUUID 07887B36-E53B-5FFF-95F7-60F8F376A550
3:253  0:017  === [ ScanVolumes ] =======================================
3:362  0:108  Found 5 volumes with blockIO
3:366  0:004  - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
3:385  0:018          Result of bootcode detection: bootable unknown (legacy)
3:387  0:002  - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)
3:393  0:005          Found optical drive
3:395  0:002  - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,172E3A87-EBFB-458E-8050-AA1DDD094676,0x28,0x64000)
3:401  0:005          Result of bootcode detection: bootable Clover (clover)
3:406  0:005          This is SelfVolume !!
3:409  0:002  - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,A75D6CDE-DCBB-42A0-966B-BF030BFEB19D,0x64028,0x25294B40)
3:420  0:011          Result of bootcode detection: bootable unknown (legacy)
3:423  0:002  - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,D4B330E4-3C19-486E-8D77-CCD6A6D9A734,0x252F8B68,0x135F20)
3:539  0:116  Loading nvram.plist from Vol 'EFI' - loaded, size=2762
3:574  0:034  === [ PutNvramPlistToRtVars ] =============================
3:659  0:085  === [ InitTheme ] =========================================
3:772  0:112   using embedded theme
3:775  0:003  Using embedded font: Success
3:778  0:002  Choosing theme <null string>
3:781  0:002  after NVRAM boot-args=-v slide=0 -xcpm
3:784  0:002  === [ Dump SMC keys from NVRAM ] ==========================
3:857  0:073  found AppleSMC protocol
3:860  0:003  === [ ScanLoader ] ========================================
3:971  0:110  - [02]: 'EFI'
3:987  0:015  - [03]: 'OSXHDD'
4:015  0:027          AddLoaderEntry for Volume Name=OSXHDD
4:045  0:029      Check if volume Is Hibernated:
4:047  0:002      Check sleep image 'by signature':
4:089  0:041      using default sleep image name = \private\var\vm\sleepimage
4:163  0:073      no valid sleep image offset was found
4:166  0:003       sleepimage offset could not be acquired
4:168  0:002      hibernated: no - sign
4:172  0:003  Icon 17 decoded, pointer BB0B4B98
4:175  0:003  - [04]: 'Recovery HD'
4:214  0:038          AddLoaderEntry for Volume Name=Recovery HD
4:224  0:010      Check if volume Is Hibernated:
4:227  0:002      Check sleep image 'by signature':
4:229  0:002      using default sleep image name = \private\var\vm\sleepimage
4:232  0:002      sleepimage not found -> Not Found
4:235  0:002      hibernated: no - sign
4:238  0:002          AddLoaderEntry for Volume Name=Recovery HD
4:252  0:013  Icon 20 decoded, pointer BAF1A218
4:255  0:003  Scanning legacy ...
4:260  0:004   2: 'EFI' (clover) add legacy
4:266  0:006  Icon 12 decoded, pointer BADB8398
4:268  0:002   added 'Boot Clover from EFI' OSType=3 Icon=clover
4:271  0:002  === [ AddCustomTool ] =====================================
4:375  0:103  Icon 8 decoded, pointer BADB8298
4:390  0:015  found tool \EFI\CLOVER\tools\Shell64U.efi
4:393  0:002  Checking EFI partition Volume 2 for Clover
4:396  0:002   Found Clover
4:398  0:002  Icon 2 decoded, pointer BAC77C98
4:401  0:002  Icon 1 decoded, pointer BAC77518
4:406  0:005  Icon 0 decoded, pointer BAC77498
4:409  0:002  Icon 5 decoded, pointer BAC77418
4:412  0:002  Icon 6 decoded, pointer BB0B4918
4:415  0:003  === [ GetEfiBootDeviceFromNvram ] =========================
4:486  0:071   - efi-boot-device-data: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,A75D6CDE-DCBB-42A0-966B-BF030BFEB19D,0x64028,0x25294B40)
4:489  0:002    - Volume: 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,A75D6CDE-DCBB-42A0-966B-BF030BFEB19D,0x64028,0x25294B40)'
4:494  0:004    - LoaderPath: '<null string>'
4:496  0:002    - Guid = A75D6CDE-DCBB-42A0-966B-BF030BFEB19D
4:499  0:002  === [ FindStartupDiskVolume ] =============================
4:581  0:082    - Volume: partition = PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,A75D6CDE-DCBB-42A0-966B-BF030BFEB19D,0x64028,0x25294B40)
4:583  0:002     - searching for that partition
4:586  0:002      - found entry 0. 'Boot macOS from OSXHDD', Volume 'OSXHDD'
4:589  0:002  Boot redirected to Entry 0. 'Boot macOS from OSXHDD'
4:594  0:005  DefaultIndex=0 and MainMenu.EntryCount=10
4:597  0:002  Icon 21 decoded, pointer BAC77198
4:691  0:094  Icon 22 decoded, pointer BAC77098
4:694  0:002  Icon 23 decoded, pointer BAC77118
4:714  0:020  Icon 11 decoded, pointer BAC47C18
4:722  0:007  GUI ready
6:769  2:047  BootVariable of the entry is empty
6:771  0:002  === [ StartLoader ] =======================================
6:879  0:107  Finally: ExternalClock=24MHz BusSpeed=99773kHz CPUFreq=2195MHz PIS: hw.busfrequency=96000000Hz
6:893  0:013  Loading boot.efi  status=Success
7:038  0:144  GetOSVersion: 10.12.5 (16F73)
7:043  0:005  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
7:045  0:002  Filtering KextPatches:
7:048  0:002   - [00]: IOGraphicsFamily (Intel HD #1: patch boot logo 10.10.x - 10.11.x) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
7:053  0:005   - [01]: AppleIntelSNBGraphicsFB (10.9/SNB/Port 05/DP>HDMI) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
7:061  0:007   - [02]: AppleIntelSNBGraphicsFB (10.9/SNB/Port 06/DP>HDMI) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
7:066  0:005  === [ PatchSmbios ] =======================================
7:174  0:108  insert table 9 for dev 0:0
7:177  0:002  insert table 9 for dev 0:0
7:180  0:002  Trusting SMBIOS...
7:183  0:002  Detected alternating SMBIOS channel banks
7:188  0:005  Channels: 2
7:191  0:002  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
7:259  0:068   partNum unknown
7:262  0:002  SMBIOS Type 17 Index = 0 => 0 0:
7:265  0:002  BANK 0 DIMM0 18756MHz 4096MB
7:267  0:002   partNum unknown
7:270  0:002  SMBIOS Type 17 Index = 1 => 1 2:
7:273  0:002  BANK 1 DIMM0 18756MHz 1024MB
7:275  0:002  mTotalSystemMemory = 5120
7:278  0:002  NumberOfMemoryDevices = 2
7:281  0:002  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000
7:286  0:005  Type20[1]->End = 0x4FFFFF, Type17[1] = 0x2400
7:289  0:003  === [ PatchACPI ] =========================================
7:408  0:119  RSDT 0xBCFFE0AC
7:411  0:002  FADT from RSDT: 0xBCFFC000
7:414  0:002  XSDT 0xBCFFE120
7:416  0:002  FADT from XSDT: 0xBCFFC000
7:419  0:002  Xsdt reallocation done
7:422  0:002  old FADT length=F4
7:424  0:002  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
7:440  0:015  Output DSDT before patch to /EFI/CLOVER/ACPI/origin/DSDT-or.aml
7:478  0:037  Apply DsdtFixMask=0x07068051
7:481  0:002     drop _DSM mask=0xFFFF
7:484  0:002  === [ FixBiosDsdt ] =======================================
7:598  0:114  VideoCard devID=0x1168086
7:601  0:002  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
7:604  0:002  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
7:606  0:002  Audio HDA (addr:0x1B0000) setting specified layout-id=28 (0x1C)
7:609  0:002  Found Airport Atheros at 0x1C0000, 0x0, DeviceID=0x002B
7:612  0:003  USBADR[1] = 0x1D0000 and PCIe = 0xFFFE
7:617  0:005  Patching DSDT:
7:621  0:003   - [Rename GFX0 to IGPU]: pattern 47465830, patched at: [ (496B) (14) (1E00) (12FD) (12) ]
7:644  0:023   - [change EHC1 to EH01]: pattern 45484331, patched at: [ (4748) (7EF) ]
7:660  0:015   - [change EHC2 to EH02]: pattern 45484332, patched at: [ (475A) (D23) ]
7:676  0:016  first CPU found at 4149 offset 414C
7:678  0:002  score candidate at 4145
7:681  0:002  score inserted in acpi_cpu_score _PR_
7:684  0:002  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
7:710  0:026  Found PCIROOTUID = 0
7:713  0:002  Start RTC Fix
7:716  0:002  found RTC Length not match, Maybe will cause CMOS reset will patch it.
7:718  0:002  Start TMR Fix
7:721  0:002  Start PIC Fix
7:724  0:002  PIC size=A2 at 3850
7:726  0:002  found CRS at 3864 size 8A
7:729  0:002  Start HPET Fix
7:732  0:003  patch HDEF in DSDT 
7:735  0:002  Start HDA Fix
7:738  0:002  found HDA device NAME(_ADR,0x001B0000) And Name is HDEF
7:743  0:005  NewName HDEF already present, renaming impossible
7:747  0:003  Start PNLF Fix
7:749  0:002  found PWRB at 308F
7:752  0:002  Start _S3D Fix
7:763  0:011  === [ ACPIDropTables ] ====================================
7:866  0:102  === [ PatchAllSSDT ] ======================================
7:971  0:105  Patch table: SSDT  VAIO len=0x1068
7:974  0:002  0. [Rename GFX0 to IGPU]: pattern 47465830, bin not found / already patched!
7:982  0:007  1. [change EHC1 to EH01]: pattern 45484331, bin not found / already patched!
7:993  0:011  2. [change EHC2 to EH02]: pattern 45484332, bin not found / already patched!
8:001  0:007  Patch table: SSDT  VAIO len=0x94E
8:004  0:002  0. [Rename GFX0 to IGPU]: pattern 47465830, bin not found / already patched!
8:012  0:007  1. [change EHC1 to EH01]: pattern 45484331, bin not found / already patched!
8:019  0:007  2. [change EHC2 to EH02]: pattern 45484332, bin not found / already patched!
8:027  0:007  Patch table: SSDT  VAIO len=0x996
8:033  0:005  0. [Rename GFX0 to IGPU]: pattern 47465830, bin not found / already patched!
8:041  0:007  1. [change EHC1 to EH01]: pattern 45484331, bin not found / already patched!
8:048  0:007  2. [change EHC2 to EH02]: pattern 45484332, bin not found / already patched!
8:056  0:007  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
8:059  0:002   Xsdt has tables count=12
8:062  0:002  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
8:064  0:002  === [ RestSetup macOS ] ===================================
8:166  0:101  custom properties for device 00:02.00 injected, continue
8:169  0:002  custom properties for device 00:16.00 injected, continue
8:172  0:002   setting specified layout-id=28 (0x1C)
8:175  0:003  stringlength = 2680
8:178  0:002  CurrentMode: Width=1366 Height=768
8:180  0:002  Beginning FSInjection
8:183  0:002  Use origin smbios table type 1 guid.
8:186  0:002  MSR 0x1B0   set to        00000000
8:189  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
8:194  0:005  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
8:197  0:003    Extra kext: EFI\CLOVER\kexts\10.12\ACPIBatteryManager.kext
8:208  0:010    Extra kext: EFI\CLOVER\kexts\10.12\AppleALC.kext
8:229  0:020      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
8:385  0:155    Extra kext: EFI\CLOVER\kexts\10.12\Lilu.kext
8:410  0:025    Extra kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext
8:429  0:018    Extra kext: EFI\CLOVER\kexts\10.12\LegacyAtheros.kext
8:456  0:027    Extra kext: EFI\CLOVER\kexts\10.12\RealtekRTL8111.kext
8:470  0:013    Extra kext: EFI\CLOVER\kexts\10.12\USBInjectAll.kext
8:768  0:298    Extra kext: EFI\CLOVER\kexts\10.12\ApplePS2SmartTouchPad.kext
8:858  0:089      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Controller.kext
8:874  0:016      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Keyboard.kext
8:931  0:056  SetStartupDiskVolume:
8:935  0:004    * Volume: 'OSXHDD'
8:937  0:002    * LoaderPath: '<null string>'
8:941  0:003    * DevPath: OSXHDD
8:944  0:002    * GUID = A75D6CDE-DCBB-42A0-966B-BF030BFEB19D
8:947  0:002    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>A75D6CDE-DCBB-42A0-966B-BF030BFEB19D</string></dict></dict></dict></array>
8:949  0:002  Custom boot screen not used because entry has unset use graphics
8:954  0:004  Closing log
16:921  7:966  Legacy USB Off Done
16:924  0:003  USB EHCI Ownership for device 1C2D value=1000001
16:928  0:003  Legacy USB Off Done
16:931  0:003  USB EHCI Ownership for device 1C26 value=1000001
0:100  0:100  MemLog inited, TSC freq: 2195014946
0:100  0:000  LegacyRegion2: Chipset/proc: 0x01048086
0:100  0:000   Next Generation Core processors (PAM 0x80-0x86)
0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01048086
0:100  0:000  , Install = Success
0:119  0:019  BiosVideoDriverBindingStart!
0:119  0:000  BiosVideoCheckForVbe
0:119  0:000  EdidOverride not found
0:131  0:012   Edid1+
0:131  0:000   found Detail Timing 1366x768
0:131  0:000  timing string after 0xFE:LG Display
  
0:131  0:000  timing string after 0xFE:LP156WH4-TLA1
0:143  0:012   Edid0+
0:143  0:000   found Detail Timing 1366x768
0:143  0:000  ... already present
0:143  0:000  timing string after 0xFE:LG Display
  
0:143  0:000  timing string after 0xFE:LP156WH4-TLA1
0:143  0:000     0 1366x768 attr=9B - ok, edid+, working, highest, pref=0
0:144  0:000     1 1024x768 attr=9B - ok, edid-, 1024x768, working
0:144  0:000     2 640x480 attr=9B - ok, edid-, 640x480, working
0:144  0:000     3 800x600 attr=9B - ok, edid-, 800x600, working
0:144  0:000  BV new mode: 0 1366x768
0:286  0:142   SetMode pref 0 (0) = Success
1:909  1:622  
1:909  0:000  Now is 25.8.2017,  6:0:6 (GMT)
1:909  0:000  Starting Clover revision: 4173 on CLOVER EFI
1:909  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.6 | XCODE: 8.3.3]
1:909  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,172E3A87-EBFB-458E-8050-AA1DDD094676,0x28,0x64000) @BC02C998
1:909  0:000  SelfDirPath = \EFI\CLOVER
1:909  0:000  === [ Get Smbios ] ========================================
1:909  0:000  Type 16 Index = 0
1:909  0:000  Total Memory Slots Count = 2
1:909  0:000  Type 17 Index = 0
1:909  0:000  Ignoring insane frequency value 20307MHz
1:909  0:000  SmbiosTable.Type17->Speed = 0MHz
1:909  0:000  SmbiosTable.Type17->Size = 4096MB
1:909  0:000  SmbiosTable.Type17->Bank/Device = Bank 0 SODIMM1
1:909  0:000  SmbiosTable.Type17->Vendor = 
1:909  0:000  SmbiosTable.Type17->SerialNumber = 
1:909  0:000  SmbiosTable.Type17->PartNumber = 
1:909  0:000  Type 17 Index = 1
1:909  0:000  Ignoring insane frequency value 20307MHz
1:909  0:000  SmbiosTable.Type17->Speed = 0MHz
1:909  0:000  SmbiosTable.Type17->Size = 1024MB
1:909  0:000  SmbiosTable.Type17->Bank/Device = Bank 1 SODIMM2
1:909  0:000  SmbiosTable.Type17->Vendor = 
1:909  0:000  SmbiosTable.Type17->SerialNumber = 
1:909  0:000  SmbiosTable.Type17->PartNumber = 
1:910  0:000  Boot status=0
1:910  0:000  Running on: 'Reserved' with board 'VAIO'
1:910  0:000  === [ GetCPUProperties ] ==================================
1:910  0:000  CPU Vendor = 756E6547 Model=206A7
1:910  0:000   The CPU supported SSE4.1
1:910  0:000   The CPU supported turbo
1:910  0:000  BrandString = Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
1:910  0:000  MSR 0xE2 before patch 1E008404
1:910  0:000  MSR 0xE2 is locked, PM patches will be turned on
1:910  0:000  MSR 0xCE              00000800_60011600
1:910  0:000  MSR 0x1A0             00850089
1:910  0:000  MSR 0x1B0             00000000
1:910  0:000  FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
1:910  0:000  MaxDiv/MinDiv: 22.0/8
1:910  0:000  Turbo: 28/28/30/31
1:910  0:000  Features: 0xBFEBFBFF
1:910  0:000  Threads: 8
1:910  0:000  Cores: 4
1:910  0:000  FSB: 100 MHz
1:910  0:000  CPU: 2200 MHz
1:910  0:000  TSC: 2200 MHz
1:910  0:000  PIS: 100 MHz
1:910  0:000  ExternalClock: 25 MHz
1:910  0:000  === [ GetDevices ] ========================================
1:910  0:000  PCI (00|00:00.00) : 8086 0104 class=060000
1:910  0:000  PCI (00|00:02.00) : 8086 0116 class=030000
1:910  0:000   - GFX: Model=Intel HD Graphics 3000 (Intel)
1:910  0:000  PCI (00|00:16.00) : 8086 1C3A class=078000
1:910  0:000  PCI (00|00:1A.00) : 8086 1C2D class=0C0320
1:910  0:000  PCI (00|00:1B.00) : 8086 1C20 class=040300
1:910  0:000  PCI (00|00:1C.00) : 8086 1C10 class=060400
1:910  0:000  PCI (00|07:00.00) : 168C 002B class=028000
1:910  0:000   - WIFI: Vendor=Atheros
1:910  0:000  PCI (00|00:1C.03) : 8086 1C16 class=060400
1:910  0:000  PCI (00|0D:00.00) : 10EC 5209 class=FF0000
1:910  0:000  PCI (00|00:1C.05) : 8086 1C1A class=060400
1:910  0:000  PCI (00|13:00.00) : 10EC 8168 class=020000
1:910  0:000   - LAN: 0 Vendor=Realtek
1:910  0:000  PCI (00|00:1D.00) : 8086 1C26 class=0C0320
1:910  0:000  PCI (00|00:1F.00) : 8086 1C49 class=060100
1:910  0:000  PCI (00|00:1F.02) : 8086 1C03 class=010601
1:910  0:000  PCI (00|00:1F.03) : 8086 1C22 class=0C0500
1:910  0:000  === [ GetDefaultSettings ] ================================
1:910  0:000  Clover load options size = 0 bytes
1:942  0:031  EFI\CLOVER\config.plist loaded: Success
1:942  0:000  === [ GetListOfThemes ] ===================================
1:954  0:012  - [00]: embedded
1:954  0:000  - [00]: ios7
1:961  0:006  - [01]: metal
1:976  0:015  - [02]: random
1:977  0:001  === [ Found config plists ] ===============================
1:977  0:000  - config.before.plist
1:977  0:000  - config.plist
1:990  0:013  === [ GetEarlyUserSettings ] ==============================
1:990  0:000  timeout set to 5
1:990  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
1:995  0:004  KextsToPatch: 3 requested
1:999  0:004   - [00]: IOGraphicsFamily (Intel HD #1: patch boot logo 10.10.x - 10.11.x) :: BinPatch :: data len: 5
2:010  0:010   - [01]: AppleIntelSNBGraphicsFB (10.9/SNB/Port 05/DP>HDMI) :: BinPatch :: data len: 12
2:021  0:010   - [02]: AppleIntelSNBGraphicsFB (10.9/SNB/Port 06/DP>HDMI) :: BinPatch :: data len: 12
2:031  0:010  Default theme: embedded
2:034  0:002  === [ LoadDrivers ] =======================================
2:139  0:105  Loading AppleImageCodec-64.efi  status=Success
2:151  0:011  Loading AppleKeyAggregator-64.efi  status=Success
2:159  0:007  Loading AppleUITheme-64.efi  status=Success
2:167  0:007  Loading FirmwareVolume-64.efi  status=Success
2:174  0:007  Loading FSInject-64.efi  status=Success
2:182  0:007  Loading Ps2MouseDxe-64.efi  status=Success
2:190  0:008   - driver needs connecting
2:193  0:002  Loading SMCHelper-64.efi  status=Success
2:201  0:007  Loading UsbMouseDxe-64.efi  status=Success
2:208  0:007   - driver needs connecting
2:213  0:004  2 drivers needs connecting ...
2:216  0:002  PlatformDriverOverrideProtocol->GetDriver overriden
2:362  0:146  === [ InitScreen ] ========================================
2:472  0:110  SetScreenResolution: 1280x1024 - not found!
2:478  0:005  Console modes reported: 4, available modes:
2:480  0:002   - [01]: 80x25
2:483  0:002   - [03]: 100x31
2:486  0:002   - [04]: 170x40 (current mode)
2:488  0:002  SetScreenResolution: 1366x768 - already set
2:494  0:005  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,172E3A87-EBFB-458E-8050-AA1DDD094676,0x28,0x64000)
2:499  0:005  Using embedded font: Success
2:504  0:004  === [ GetMacAddress ] =====================================
2:612  0:108  === [ ScanSPD ] ===========================================
2:732  0:119  SMBus device : 8086 1C22 class=0C0500 status=Success
2:734  0:002  SMBus CmdReg: 0x3
2:737  0:002  Scanning SMBus [8086:1C22], mmio: 0xD2605004, ioport: 0x4040, hostc: 0x1
2:739  0:002  Slots to scan [8]...
2:745  0:005  SPD[0]: Type 11 @0x50
2:766  0:021  Not using XMP because it is not present
2:769  0:002  DDR speed 1600MHz
2:772  0:002  Slot: 0 Type 24 4096MB 1600MHz Vendor=Hynix Semiconductor PartNo=HMT451S6AFR8A-PBN0 SerialNo=0001030406090700
2:775  0:003  SPD[2]: Type 11 @0x52
2:797  0:021  Not using XMP because it is not present
2:799  0:002  DDR speed 1333MHz
2:802  0:002  Slot: 2 Type 24 1024MB 1333MHz Vendor=Hynix Semiconductor PartNo=HMT112S6TFR8C-H9N0 SerialNo=050A02040F030901
2:808  0:005  === [ GetAcpiTablesList ] =================================
2:901  0:092  Get Acpi Tables List from RSDT:
2:906  0:005   - [00]: FACP  VAIO len=244
2:908  0:002   - [01]: ASF!  VAIO len=165
2:911  0:002   - [02]: HPET  VAIO len=56
2:914  0:002   - [03]: APIC  VAIO len=140
2:916  0:002   - [04]: MCFG  VAIO len=60
2:919  0:002   - [05]: SLIC  VAIO len=374
2:922  0:002   - [06]: WDAT  VAIO len=548
2:924  0:002   - [07]: SSDT  VAIO len=4200
2:927  0:002   - [08]: BOOT  VAIO len=40
2:932  0:005   - [09]: ASPT  VAIO len=52
2:935  0:002   - [10]: SSDT  VAIO len=2382
2:938  0:002   - [11]: SSDT  VAIO len=2454
2:940  0:002  Calibrated TSC Frequency = 2195014946 = 2195MHz
2:943  0:003  === [ GetUserSettings ] ===================================
3:041  0:097  Add 2 devices:
3:043  0:002   - [00]: [00:02.00]  (Inject Intel HD properties)
3:054  0:010   - [01]: [00:16.00]  (Inject IMEI properties)
3:064  0:010  USB FixOwnership: yes
3:067  0:002  Dropping 3 tables:
3:069  0:002   - [00]: Drop table  signature="DMAR" (52414D44)
3:094  0:024           - set table: 52414D44,                0 to drop: no
3:099  0:005   - [01]: Drop table  signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
3:139  0:039           - set table: 54445353,       6D50757043 to drop: no
3:144  0:005   - [02]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
3:189  0:044           - set table: 54445353,   74734930757043 to drop: no
3:194  0:005   - final DSDT Fix mask=07068051
3:199  0:004  PatchesDSDT: 3 requested
3:202  0:002   - [00]: (Rename GFX0 to IGPU) lenToFind: 4, lenToReplace: 4
3:212  0:010   - [01]: (change EHC1 to EH01) lenToFind: 4, lenToReplace: 4
3:223  0:010   - [02]: (change EHC2 to EH02) lenToFind: 4, lenToReplace: 4
3:233  0:010  PluginType: 0
3:236  0:002  Use latest BiosVersion from clover
3:238  0:002  BiosVersion: MBP81.88Z.004D.B00.1708080655
3:241  0:002  BiosReleaseDate: 08/08/17
3:244  0:002  ChassisType: 0xA
3:246  0:002  FirmwareFeatures: 0xC00DE137
3:252  0:005  FirmwareFeaturesMask: 0xFFFFFFFF
3:255  0:002  PlatformFeature: 0xFFFF
3:258  0:002  Converted CustomUUID 07887B36-E53B-5FFF-95F7-60F8F376A550
3:278  0:020  === [ ScanVolumes ] =======================================
3:387  0:108  Found 5 volumes with blockIO
3:389  0:002  - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
3:399  0:009          Result of bootcode detection: bootable unknown (legacy)
3:402  0:002  - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)
3:409  0:007          Found optical drive
3:412  0:002  - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,172E3A87-EBFB-458E-8050-AA1DDD094676,0x28,0x64000)
3:417  0:005          Result of bootcode detection: bootable Clover (clover)
3:420  0:002          This is SelfVolume !!
3:423  0:002  - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,A75D6CDE-DCBB-42A0-966B-BF030BFEB19D,0x64028,0x25294B40)
3:435  0:011          Result of bootcode detection: bootable unknown (legacy)
3:439  0:004  - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,D4B330E4-3C19-486E-8D77-CCD6A6D9A734,0x252F8B68,0x135F20)
3:554  0:114  Loading nvram.plist from Vol 'EFI' - loaded, size=2762
3:588  0:034  === [ PutNvramPlistToRtVars ] =============================
3:670  0:081  === [ InitTheme ] =========================================
3:791  0:120   using embedded theme
3:794  0:003  Using embedded font: Success
3:797  0:002  Choosing theme <null string>
3:802  0:004  after NVRAM boot-args=-v slide=0 -xcpm
3:804  0:002  === [ Dump SMC keys from NVRAM ] ==========================
3:878  0:073  found AppleSMC protocol
3:881  0:003  === [ ScanLoader ] ========================================
3:991  0:110  - [02]: 'EFI'
4:012  0:021  - [03]: 'OSXHDD'
4:040  0:027          AddLoaderEntry for Volume Name=OSXHDD
4:070  0:030      Check if volume Is Hibernated:
4:073  0:002      Check sleep image 'by signature':
4:114  0:041      using default sleep image name = \private\var\vm\sleepimage
4:166  0:051      no valid sleep image offset was found
4:169  0:003       sleepimage offset could not be acquired
4:173  0:004      hibernated: no - sign
4:176  0:002  Icon 17 decoded, pointer BB0B4B98
4:179  0:003  - [04]: 'Recovery HD'
4:217  0:037          AddLoaderEntry for Volume Name=Recovery HD
4:227  0:010      Check if volume Is Hibernated:
4:230  0:002      Check sleep image 'by signature':
4:233  0:002      using default sleep image name = \private\var\vm\sleepimage
4:238  0:005      sleepimage not found -> Not Found
4:241  0:002      hibernated: no - sign
4:244  0:003          AddLoaderEntry for Volume Name=Recovery HD
4:288  0:044  Icon 20 decoded, pointer BAF1A218
4:292  0:003  Scanning legacy ...
4:295  0:002   2: 'EFI' (clover) add legacy
4:300  0:005  Icon 12 decoded, pointer BADB8398
4:303  0:002   added 'Boot Clover from EFI' OSType=3 Icon=clover
4:306  0:002  === [ AddCustomTool ] =====================================
4:408  0:102  Icon 8 decoded, pointer BADB8298
4:437  0:029  found tool \EFI\CLOVER\tools\Shell64U.efi
4:440  0:003  Checking EFI partition Volume 2 for Clover
4:443  0:002   Found Clover
4:446  0:002  Icon 2 decoded, pointer BAC77C98
4:449  0:002  Icon 1 decoded, pointer BAC77518
4:452  0:002  Icon 0 decoded, pointer BAC77498
4:454  0:002  Icon 5 decoded, pointer BAC77418
4:457  0:002  Icon 6 decoded, pointer BB0B4918
4:460  0:003  === [ GetEfiBootDeviceFromNvram ] =========================
4:532  0:071   - efi-boot-device-data: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,A75D6CDE-DCBB-42A0-966B-BF030BFEB19D,0x64028,0x25294B40)
4:537  0:005    - Volume: 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,A75D6CDE-DCBB-42A0-966B-BF030BFEB19D,0x64028,0x25294B40)'
4:540  0:003    - LoaderPath: '<null string>'
4:547  0:007    - Guid = A75D6CDE-DCBB-42A0-966B-BF030BFEB19D
4:550  0:002  === [ FindStartupDiskVolume ] =============================
4:632  0:082    - Volume: partition = PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,A75D6CDE-DCBB-42A0-966B-BF030BFEB19D,0x64028,0x25294B40)
4:637  0:004     - searching for that partition
4:640  0:003      - found entry 0. 'Boot macOS from OSXHDD', Volume 'OSXHDD'
4:643  0:002  Boot redirected to Entry 0. 'Boot macOS from OSXHDD'
4:645  0:002  DefaultIndex=0 and MainMenu.EntryCount=10
4:648  0:002  Icon 21 decoded, pointer BAC77198
4:742  0:094  Icon 22 decoded, pointer BAC77098
4:745  0:002  Icon 23 decoded, pointer BAC77118
4:772  0:026  Icon 11 decoded, pointer BAC47C18
4:781  0:008  GUI ready
10:751  5:970  BootVariable of the entry is empty
10:754  0:002  === [ StartLoader ] =======================================
10:862  0:108  Finally: ExternalClock=24MHz BusSpeed=99773kHz CPUFreq=2195MHz PIS: hw.busfrequency=96000000Hz
10:867  0:005  Loading boot.efi  status=Success
11:011  0:144  GetOSVersion: 10.12.5 (16F73)
11:016  0:005  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
11:021  0:004  Filtering KextPatches:
11:024  0:002   - [00]: IOGraphicsFamily (Intel HD #1: patch boot logo 10.10.x - 10.11.x) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
11:029  0:005   - [01]: AppleIntelSNBGraphicsFB (10.9/SNB/Port 05/DP>HDMI) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
11:034  0:005   - [02]: AppleIntelSNBGraphicsFB (10.9/SNB/Port 06/DP>HDMI) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
11:042  0:008  === [ PatchSmbios ] =======================================
11:150  0:107  insert table 9 for dev 0:0
11:153  0:002  insert table 9 for dev 0:0
11:156  0:002  Trusting SMBIOS...
11:158  0:002  Detected alternating SMBIOS channel banks
11:161  0:002  Channels: 2
11:164  0:002  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
11:232  0:068   partNum unknown
11:235  0:002  SMBIOS Type 17 Index = 0 => 0 0:
11:237  0:002  BANK 0 DIMM0 18756MHz 4096MB
11:242  0:004   partNum unknown
11:245  0:002  SMBIOS Type 17 Index = 1 => 1 2:
11:247  0:002  BANK 1 DIMM0 18756MHz 1024MB
11:250  0:002  mTotalSystemMemory = 5120
11:253  0:002  NumberOfMemoryDevices = 2
11:255  0:002  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000
11:258  0:002  Type20[1]->End = 0x4FFFFF, Type17[1] = 0x2400
11:261  0:002  === [ PatchACPI ] =========================================
11:374  0:113  RSDT 0xBCFFE0AC
11:376  0:002  FADT from RSDT: 0xBCFFC000
11:382  0:005  XSDT 0xBCFFE120
11:385  0:002  FADT from XSDT: 0xBCFFC000
11:388  0:002  Xsdt reallocation done
11:390  0:002  old FADT length=F4
11:393  0:002  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
11:403  0:009  Output DSDT before patch to /EFI/CLOVER/ACPI/origin/DSDT-or.aml
11:430  0:026  Apply DsdtFixMask=0x07068051
11:433  0:002     drop _DSM mask=0xFFFF
11:435  0:002  === [ FixBiosDsdt ] =======================================
11:546  0:110  VideoCard devID=0x1168086
11:552  0:005  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
11:554  0:002  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
11:557  0:002  Audio HDA (addr:0x1B0000) setting specified layout-id=28 (0x1C)
11:560  0:002  Found Airport Atheros at 0x1C0000, 0x0, DeviceID=0x002B
11:563  0:003  USBADR[1] = 0x1D0000 and PCIe = 0xFFFE
11:566  0:002  Patching DSDT:
11:568  0:002   - [Rename GFX0 to IGPU]: pattern 47465830, patched at: [ (496B) (14) (1E00) (12FD) (12) ]
11:592  0:024   - [change EHC1 to EH01]: pattern 45484331, patched at: [ (4748) (7EF) ]
11:611  0:018   - [change EHC2 to EH02]: pattern 45484332, patched at: [ (475A) (D23) ]
11:626  0:015  first CPU found at 4149 offset 414C
11:629  0:002  score candidate at 4145
11:632  0:002  score inserted in acpi_cpu_score _PR_
11:635  0:002  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
11:658  0:023  Found PCIROOTUID = 0
11:661  0:002  Start RTC Fix
11:664  0:002  found RTC Length not match, Maybe will cause CMOS reset will patch it.
11:669  0:004  Start TMR Fix
11:673  0:003  Start PIC Fix
11:676  0:003  PIC size=A2 at 3850
11:679  0:003  found CRS at 3864 size 8A
11:683  0:003  Start HPET Fix
11:686  0:003  patch HDEF in DSDT 
11:689  0:002  Start HDA Fix
11:693  0:003  found HDA device NAME(_ADR,0x001B0000) And Name is HDEF
11:696  0:003  NewName HDEF already present, renaming impossible
11:699  0:003  Start PNLF Fix
11:702  0:002  found PWRB at 308F
11:704  0:002  Start _S3D Fix
11:719  0:014  === [ ACPIDropTables ] ====================================
11:819  0:100  === [ PatchAllSSDT ] ======================================
11:925  0:105  Patch table: SSDT  VAIO len=0x1068
11:927  0:002  0. [Rename GFX0 to IGPU]: pattern 47465830, bin not found / already patched!
11:935  0:007  1. [change EHC1 to EH01]: pattern 45484331, bin not found / already patched!
11:943  0:008  2. [change EHC2 to EH02]: pattern 45484332, bin not found / already patched!
11:951  0:007  Patch table: SSDT  VAIO len=0x94E
11:957  0:005  0. [Rename GFX0 to IGPU]: pattern 47465830, bin not found / already patched!
11:966  0:009  1. [change EHC1 to EH01]: pattern 45484331, bin not found / already patched!
11:976  0:009  2. [change EHC2 to EH02]: pattern 45484332, bin not found / already patched!
11:984  0:008  Patch table: SSDT  VAIO len=0x996
11:986  0:002  0. [Rename GFX0 to IGPU]: pattern 47465830, bin not found / already patched!
11:994  0:007  1. [change EHC1 to EH01]: pattern 45484331, bin not found / already patched!
12:005  0:011  2. [change EHC2 to EH02]: pattern 45484332, bin not found / already patched!
12:014  0:008  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
12:016  0:002   Xsdt has tables count=12
12:019  0:002  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
12:022  0:002  === [ RestSetup macOS ] ===================================
12:119  0:097  custom properties for device 00:02.00 injected, continue
12:122  0:002  custom properties for device 00:16.00 injected, continue
12:128  0:005   setting specified layout-id=28 (0x1C)
12:131  0:003  stringlength = 2680
12:134  0:002  CurrentMode: Width=1366 Height=768
12:137  0:002  Beginning FSInjection
12:140  0:002  Use origin smbios table type 1 guid.
12:142  0:002  MSR 0x1B0   set to        00000000
12:146  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
12:148  0:002  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
12:151  0:002    Extra kext: EFI\CLOVER\kexts\10.12\ACPIBatteryManager.kext
12:172  0:020    Extra kext: EFI\CLOVER\kexts\10.12\AppleALC.kext
12:192  0:020      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
12:348  0:155    Extra kext: EFI\CLOVER\kexts\10.12\Lilu.kext
12:373  0:025    Extra kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext
12:392  0:018    Extra kext: EFI\CLOVER\kexts\10.12\LegacyAtheros.kext
12:419  0:027    Extra kext: EFI\CLOVER\kexts\10.12\RealtekRTL8111.kext
12:436  0:017    Extra kext: EFI\CLOVER\kexts\10.12\USBInjectAll.kext
12:740  0:304    Extra kext: EFI\CLOVER\kexts\10.12\ApplePS2SmartTouchPad.kext
12:832  0:091      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Controller.kext
12:848  0:016      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Keyboard.kext
12:905  0:056  SetStartupDiskVolume:
12:907  0:002    * Volume: 'OSXHDD'
12:910  0:002    * LoaderPath: '<null string>'
12:913  0:002    * DevPath: OSXHDD
12:917  0:004    * GUID = A75D6CDE-DCBB-42A0-966B-BF030BFEB19D
12:920  0:002    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>A75D6CDE-DCBB-42A0-966B-BF030BFEB19D</string></dict></dict></dict></array>
12:923  0:002  Custom boot screen not used because entry has unset use graphics
12:925  0:002  Closing log
20:873  7:947  Legacy USB Off Done
20:876  0:003  USB EHCI Ownership for device 1C2D value=1000001
20:887  0:011  Legacy USB Off Done
20:891  0:003  USB EHCI Ownership for device 1C26 value=1000001


#6
Hervé

Hervé

    InsanelyMacaholic

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 2,935 posts
  • Gender:Male
  • Location:Rennes, BZH of course!

Your wireless card registers under device PXSX under RP01. To declare compatibility with AR9380, you simply add the following _DSM code to the device and rename it to ARPT, i.e. change this:

            Device (PXSX)
            {
                Name (_ADR, Zero)  // _ADR: Address
                Name (_PRW, Package (0x02)  // _PRW: Power Resources for Wake
                {
                    0x09, 
                    0x03
                })
            }

to this:

            Device (ARPT)
            {
                Name (_ADR, Zero)  // _ADR: Address
                Name (_PRW, Package (0x02)  // _PRW: Power Resources for Wake
                {
                    0x09, 
                    0x03
                })
                Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                {
                    If (LEqual (Arg2, Zero))
                    {
                        Return (Buffer (One)
                        {
                            0x03                                           
                        })
                    }


                    Return (Package ()
                    {
                        "compatible",      // Declares compatibility with a device
                        Buffer (0x0B)
                        {
                            "pci168c,30"   // PCI id of device supported OOB
                        }
                    })
                }
            }

and under Method (HPME, 0, Serialized) right underneath, you change: 

                   Notify (PXSX, 0x02)

to this:

                   Notify (ARPT, 0x02)

`

Attached File  DSDT_ARPT.aml.zip   14.25KB   1 downloads







Also tagged with one or more of these keywords: sony vaio, clover, dsdt, sierra, hackintosh, sandybridge, hd3000


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2016 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy