Jump to content

KP when booting -f -v


marvelloard
 Share

17 posts in this topic

Recommended Posts

Hi,

 

my Hackintosh (see signature) works "fine", but when using the -f flag I get the attached KP. Could anyone give me a hint what causes this KP? nvda_drv on/off makes no difference. NVidia driver will not load, on bootup always the built in driver loads.

post-1041148-0-86669600-1498827285_thumb.jpg

  • Like 1
Link to comment
Share on other sites

No clover folder, Enoch

 

/Extra/Extensions

ACPISensors.kext		GenericUSBXHCI.kext
AHCI_3rdParty_SATA.kext		IONetworkingFamily.kext
AppleACPIPlatform.kext		LPCSensors.kext
CPUSensors.kext			Patched_10.12_AppleRTC.kext
FakeSMC.kext			kXAudioDriver.kext
GPUSensors.kext

boot.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>DropSSDT</key>
	<string>Yes</string>
	<key>EnableC2State</key>
	<string>Yes</string>
	<key>EnableC3State</key>
	<string>Yes</string>
	<key>EnableC4State</key>
	<string>Yes</string>
	<key>EthernetBuiltIn</key>
	<string>Yes</string>
	<key>GenerateCStates</key>
	<string>Yes</string>
	<key>GeneratePStates</key>
	<string>Yes</string>
	<key>Graphics Mode</key>
	<string>1680x1050x32</string>
	<key>Kernel Flags</key>
	<string>kext-dev-mode=1 darkwake=0 dart=0 nvda_drv=1</string>
	<key>KeyLayout</key>
	<string>mac-de</string>
	<key>Theme</key>
	<string>Choose_Your_OS</string>
	<key>Timeout</key>
	<string>3</string>
	<key>USBBusFix</key>
	<string>Yes</string>
	<key>UseKernelCache</key>
	<string>Yes</string>
</dict>
</plist>

Yes, exactly. With last Cartri BIOS mod. Thank you already.

Send me Nemesis.zip

  • Like 1
Link to comment
Share on other sites

what ur quad? have sse4.1?

man, back to original bios, i edit ur DSDT, cartri bios is only it, bios with DSDT edited with old patches, nothing more, dont need bios mod, Clover have a Override function

use Clover, the bootloader is amazin'

Check ur clover folder

CLOVER.zip

Link to comment
Share on other sites

Q9500. It worked before..

Thank you. I realised the partition table was damaged and started from scratch. Reverted to stock BIOS, changed to Clover. Reinstalled macOS.

 

Now I get "busy timeout[0], (60s) kextd wait(0): 'AppleACPICPU'". After a while, the screen goes black..

 

Edit:
took clover config from USB installer, which actually works. GraphicsEnabler=No, changed SMBIOS to iMac 14,2 (worked before and also now again).

It boots, it works, I get good graphics, but after 2 mins the system randomly reboots..!
Also I installed hwmonitor with its kexts, my machine is stuck at 2,83GHz, cores are running at full speed all the time.

 

Edit2:

Flashed again Cartri BIOS, Hackintosh working perfectly fine now (using Clover).

  • Like 1
Link to comment
Share on other sites

 Share

×
×
  • Create New...