czaru Posted June 29, 2017 Share Posted June 29, 2017 Hello people! i am looking for some guide with Flags for Pegatron RADEON HD 7570 (6570 rebranded) in CLOVER i've been trying with sierra but the screen goes off in my first attemps... This is my exact model https://www.techpowerup.com/gpudb/b692/pegatron-hd-7570 It is an ATI/AMD Radeon HD 7570 / 1 GB - DDR3 SDRAM - 128-bit / PCIe v2.0 x16 (5.0 Gb/s) @ x16 (5.0 Gb/s) and I wish to test it using El Capitan or Sierra, I’ve found info claiming make it work using personality “Ipomoea” : --- --- --- AMD Radeon HD 6570/7570 Series: Chipset Model: AMD Radeon HD 6570/7570 Series Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 1024 MB Vendor: ATI (0x1002) Device ID: 0x6759 Revision ID: 0x0000 Displays:Apple Studio Display: Display Type: LCD Resolution: 1280 x 1024 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Rotation: SupportedL05HD: Resolution: 1280 x 720 @ 60Hz (720p) Pixel Depth: 32-Bit Color (ARGB8888) Mirror: Off Online: Yes Rotation: Supported Television: Yes In MAC OS 10.9.2 (13C64) Model ID MacPro4,1 ...using modified Ipomoea personality(suggested by Slice) DVI/HDMI ...VGA not tested...using Chameleon 2377 GraphicsEnabler=Yes Ati_Config=Ipomoea ...the modified personality is here: Graphics Card Model: Asus/AMD HD 6570 GDDR3 1024MB(low power/low profile)Graphics Card Manufacture Name: AsusGraphics Card Manufacture Part Number:N/AFixed by: RobertX/Slice Patched Framebuffer: Personality: IpomoeaConnectorInfo count in decimal: 3Disk offset in decimal 789568 0000000 00 04 00 00 04 03 00 00 00 01 00 00 12 04 01 05 04 00 00 00 04 03 00 00 00 01 00 00 10 00 01 040000010 00 08 00 00 04 02 00 00 00 01 00 00 11 02 04 03 00 08 00 00 04 02 00 00 00 01 00 00 12 04 04 030000020 10 00 00 00 10 00 00 00 00 01 00 00 00 00 00 02 10 00 00 00 10 00 00 00 00 01 00 00 00 00 00 010000030 ..marked in red are the modified values used... ----- And if it worked with mavericks, will this GPU work with El Capi or Sierra? The values used in red color… where they must be applied in Clover? The model ID MacPro4,1 is recommended or you would suggest other model? Any guide in general words of how to proceed? I’ ll be wating your kind suggestions! Saludos, czaru. Link to comment Share on other sites More sharing options...
czaru Posted July 3, 2017 Author Share Posted July 3, 2017 Hello people! i am looking for some guide with Flags for Pegatron RADEON HD 7570 (6570 rebranded) in CLOVER i've been trying with sierra but the screen goes off in my first attemps... This is my exact model https://www.techpowerup.com/gpudb/b692/pegatron-hd-7570 It is an ATI/AMD Radeon HD 7570 / 1 GB - DDR3 SDRAM - 128-bit / PCIe v2.0 x16 (5.0 Gb/s) @ x16 (5.0 Gb/s) and I wish to test it using El Capitan or Sierra, ----- And if it worked with mavericks, will this GPU work with El Capi or Sierra? The values used in red color… where they must be applied in Clover? The model ID MacPro4,1 is recommended or you would suggest other model? Any guide in general words of how to proceed? I’ ll be wating your kind suggestions! Saludos, czaru. Still anybody has a suggestion over there? a clue? i think i have the info to make the test... any clue where to put data in Clover? very kindly... cZaru. Link to comment Share on other sites More sharing options...
Recommended Posts