cloudbrain Posted June 9, 2017 Share Posted June 9, 2017 Hello my specs are: i5-4200u 8 GB RAM Intel HD 4400 GT 740M 2 GB 750GB hard disk X750LB motherboard Following this guide http://www.insanelymac.com/forum/topic/310038-manually-install-clover-in-windows/ I successfully installed clover in my Computer. Then using TransMac I transferred El Capitan installation into a usb. When I try to boot from osx usb through clover there's just a row of plus signs. Googled it up a bit, yes i tried switching/removing files (all combinations I could find online). It just stucks there. I also tried with nv_disable) Any help? Link to comment Share on other sites More sharing options...
andrius94 Posted June 9, 2017 Share Posted June 9, 2017 Hi, as far as I can see the tutorial you are using is not the easiest one I see you are using laptop. Which exactly do you use (model)? Secondly, try booting with flag -v and post photo what you got. By the way, are you trying dual boot? Link to comment Share on other sites More sharing options...
cloudbrain Posted June 9, 2017 Author Share Posted June 9, 2017 It's an Asus R751LB. I've tried booting with -v and nv_disable 1 to see what's going on. There are just two lines saying standard stuff like. blahblahblahblabh overriding blahblahblabh booting in safe mode. +++++++++++++++++++++++++++++++++++++++++++++++_ Yes I am going for Dual boot for now, will probably keep a 50gb windows partition just in case Link to comment Share on other sites More sharing options...
nawcom Posted June 9, 2017 Share Posted June 9, 2017 what configuration are you using for clover? i'd start with this one https://github.com/RehabMan/OS-X-Clover-Laptop-Config/blob/master/config_HD4600_4400_4200.plist Link to comment Share on other sites More sharing options...
Recommended Posts