Jump to content

USB Installer MacOS 10.12 - Intel core i7-6700k - GTX 960 - Asus Z170A


25 posts in this topic

Recommended Posts

So i have created a mac os 10.12 install media with the --createinstallmedia command in terminal, i installed clover onto the USB plugged it into my machine, the machine has an Asus Z170A with 16gb DDR4 Memmory, a GTX 960 SSC. I have Execute disable bit and VT-d disabled, i have XHCI Handoff enabled. The installer wont boot and pauses at System Uptime in nanoseconds: xxxxxxxxx

 

Here is a screenshot, Im not sure if this says anything or not but any help is much appreciated!

 

 

post-2003240-0-45923300-1495483510_thumb.jpg

  • Like 1
Link to comment
Share on other sites

remove my DSDT inside Clover/Acpi/Patched, dont use DSDT from other mobo model

 

press barspace, go to acpi patching, dsdt name put dsdt02.aml

Link to comment
Share on other sites

remove my DSDT inside Clover/Acpi/Patched, dont use DSDT from other mobo model

 

press barspace, go to acpi patching, dsdt name put dsdt02.aml

I didn't use your DSDT I used a config.plist that was similar to my build. Here is the Config file. I did add NvidiaWeb as a new <key>. \

Im away from home atm but i will post the config asap.

  • Like 1
Link to comment
Share on other sites

1- Replace full folder, dont change nothing

attachicon.gifCLOVER.zip

2- Update Clover

attachicon.gifClover_v2.4k_r4077.pkg.zip

3- Reboot

4- Send me ioreg

attachicon.gifIORegistryExplorer.app.zip

https://1drv.ms/u/s!AtkCeEw8tjPZwnLR9k4aM5Lj2PDk

 

I did what you said. Video acceleration works flawlessly, i can boot independently now. Everything is almost fully functional. Messages even launches! Above is a fresh "RunMe" app recording.

Link to comment
Share on other sites

Ive managed to solve the USB 3 issues. I still need a new boot entry added into clover.

Here is the .ioreg file.

https://1drv.ms/u/s!AtkCeEw8tjPZwnM0_nr8EErhVVlL

Replace DSDT in Clover/Acpi/Patched

DSDT.final.zip

U dont need managed nothing, all in DSDT and Clover folder

 

Many tutorials about "add windows entry in clover", check in search forum

Link to comment
Share on other sites

  • 3 weeks later...

Hey so now that my wireless solution has arrived in the mail. i cannot "Turn on" the card inside of mac os. It is detected by system report. ANy suggestions.?

THe model of the card is a (BCM940360CD)

  • Like 1
Link to comment
Share on other sites

 Share

×
×
  • Create New...