lordscales91 Posted April 20, 2017 Share Posted April 20, 2017 I have created a macos Sierra USB installer using Pandora's box. I'm able to boot into Clover but the installation doesn't load, I tried to add the "-v" boot flag for a verbose output but I only see a few asterisks or dots. I'm currently running El Capitan without problems. I just created the installer and installed the Clover bootloader. Maybe there is some conflict between the USB's Clover and the one installed on the current drive? I wanted to test the USB installer before replacing the drive because obviously I will not be able to boot to my current OS X installation (El Capitan) afterwards. Of course I could just set up an OS X VM from Windows and prepare the USB there like I did the first time (using other tool). That's plan B but I would like to make the USB installer work to avoid the hassle of setting up a VM My hardware Motherboard: Gigabyte GA-H81M-H CPU: Intel i5 4440 3.1 GHz RAM: 1x 8 GB DDR3 Kingston 1600 MHz Graphic Card: MSI GTX 660 Drives: - Seagate ST3320820AS (320GB, Current drive, will be replaced by a new one) - Seagate ST1000DM003 (1TB, Target drive, not installed yet, it will replace the 320GB one) - Seagate ST2000DM001-1ER64 (2TB, Just for data) Link to comment Share on other sites More sharing options...
MaLd0n Posted April 20, 2017 Share Posted April 20, 2017 check work for u http://www.insanelymac.com/forum/topic/322164-guide-macos-sierra-1012x-on-gigabyte-ga-h97m-d3h-dsdt/ u can use same files http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=227282 Link to comment Share on other sites More sharing options...
kjp4756 Posted April 20, 2017 Share Posted April 20, 2017 I had the exact same issue today while trying to do a clean install of 10.12.4 using clover 4061. I think there may be something up with this latest clover version. Maybe tonight I will try a clean install again with 4049. UPDATE: 4049 is able to boot the installer. Link to comment Share on other sites More sharing options...
lordscales91 Posted April 21, 2017 Author Share Posted April 21, 2017 check work for u http://www.insanelymac.com/forum/topic/322164-guide-macos-sierra-1012x-on-gigabyte-ga-h97m-d3h-dsdt/ u can use same files http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=227282 Thank you, now the Installer boots correctly, now let's see if I'm able to complete the installation (I hope so) 1 Link to comment Share on other sites More sharing options...
Recommended Posts