modaifallah Posted March 26, 2017 Share Posted March 26, 2017 This is the report of my PC from HWInfo on Windows:Computer: ASUS N552VWCPU: Intel Core i7-6700HQ (Skylake-H, R0) 2600 MHz (26.00x100.0) @ 3192 MHz (32.00x99.8)Motherboard: ASUS N552VWChipset: Intel HM170 (Skylake PCH-H)Memory: 12288 MBytes @ 1064 MHz, 15-15-15-36 - 4096 MB PC17000 DDR4 SDRAM - Samsung M471A5143DB0-CPB - 8192 MB PC17000 DDR4 SDRAM - SK Hynix HMA41GS6AFR8N-TFGraphics: Intel HD Graphics 530 (Skylake-H GT2) - Integrated Graphics Controller [s0/R0] [AsusTek] Intel HD Graphics 530, 1024 MBGraphics: NVIDIA GeForce GTX 960M [ASUS] NVIDIA GeForce GTX 960M, 2048 MB GDDR5 SDRAMDrive: SAMSUNG MZNLF128HCHP-00004, 125.0 GB, Serial ATA 6Gb/s @ 6Gb/sDrive: TOSHIBA MQ01ABD100, 976.8 GB, Serial ATA 6Gb/s @ 6Gb/sDrive: MAT{censored}ABD-MLT UJ272 S, BD-RESound: Intel Skylake PCH-H - High Definition Audio ControllerNetwork: Intel Dual Band Wireless-AC 7265 AC 2x2 HMC WiFi AdapterNetwork: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NICOS: Microsoft Windows 10 Home Single Language (x64) Build 14986.1001 Clover shows me:OsxAptioFixDrv: Starting overrides for System\Library\CoreServices\boot.efiUsing reloc block: yes, hibernate wake: no++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ and then hangs forever till I hardware reset it. Any suggestions? Thanks in advance UPDATE: I tried both osxaptiofix(2)drv files and all failed. Removed them and the first two lines disappeared yet the plus signs line is still there. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted March 26, 2017 Share Posted March 26, 2017 Use KernelPM Check config.plist.zip 2 Link to comment Share on other sites More sharing options...
modaifallah Posted March 28, 2017 Author Share Posted March 28, 2017 Use KernelPM Check config.plist.zip Didn't work.... same line of pluses +++++++++++++ 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted March 28, 2017 Share Posted March 28, 2017 post ur clover folder, inside usb stick 2 Link to comment Share on other sites More sharing options...
modaifallah Posted March 28, 2017 Author Share Posted March 28, 2017 CLOVER.zip post ur clover folder, inside usb stick post ur clover folder, inside usb stick done.check previous post 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted March 28, 2017 Share Posted March 28, 2017 CLOVER.zip 1 Link to comment Share on other sites More sharing options...
modaifallah Posted March 31, 2017 Author Share Posted March 31, 2017 MaLd0n 2017-03-28 às 17.25.35.png CLOVER.zip Didn't work too, same error Please don't give up on my problem. Any suggestions are appreciated 1 Link to comment Share on other sites More sharing options...
modaifallah1 Posted May 19, 2017 Share Posted May 19, 2017 After some time I discovered that the image I was using wasn't Sierra, it was El Capitan LOL........ And after some research, trial and error Sierra works now perfectly except for: - No audio input/output - No brightness control in settings but I'm using Shady which is awesome. - touchpad doesn't work but using USB mouse - No wifi but using USB tethering from my Samsung S7 Other than that the system is pretty fast and stable that I even removed -v from clover. What can I do to get audio to work? I have Intel WIFI is it supported? 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 19, 2017 Share Posted May 19, 2017 wifi intel dont work what ur audio codec? post ur files -Post ur full Clover folder with original tables, press F4 in Clover Boot Screen, files generate in Clover/Acpi/origin -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=235412 -Run it, post files generate in ur desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=222609 1 Link to comment Share on other sites More sharing options...
modaifallah1 Posted May 20, 2017 Share Posted May 20, 2017 I'm a medical student and I have finals this Monday and Wednesday. Can you KINDLY check this post again this Wednesday? I will post the attachments ASAP after Wednesday's exam. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 20, 2017 Share Posted May 20, 2017 ofc 2 Link to comment Share on other sites More sharing options...
modaifallah1 Posted May 25, 2017 Share Posted May 25, 2017 I really appreciate your patience <3 Here are the files you requested Sir. There is a very similar Asus (maybe identical?) with a guide on some site and it mentions the following DSDTs edits. I tried following the guide but I failed because Maciasl gave me errors even before applying any patches. "DDST patches:Open DSDT.dsl, in MaciASL:Search for ‘GFX0’ and replace all with ‘IGPU’- Brightness control under FN Keys:search 'Method (_Q0E, 0, NotSerialized)' and insert 'If...' code Code (Text): Method (_Q0E, 0, NotSerialized) { If (ATKP) { \_SB.ATKD.IANE (0x20) } ... } search 'Method (_Q0F, 0, NotSerialized)' and insert 'If...' code Code (Text): Method (_Q0F, 0, NotSerialized) { If (ATKP) { \_SB.ATKD.IANE (0x10) } ... } - Keyboard Backlight Patch:Go to Desktop/ROG_551_552 folder, open patches folder and select one, KeyboardBacklight4.txt for 4 level step. or KeyboardBacklight16.txt for 16 level step control. Patch DSDT.dsl with those patch, use patchmatic (Guide above)Click on Patch and apply the following patches (Must use Internet connection):[syn] Rename _DSM methods to XDSM[bat] Asus G75VW[sys] Fix _WAK Arg0 v2[sys] Fix _WAK IAOE[sys] Fix Mutex with non-zero SyncLevel[sys] Fix PNOT/PPNT[sys] IRQ Fix[sys] OS Check Fix (Windows 8)[sys] SMBUS Fix[sys] Skylake LPCsee 'Before' column in MaciASL and look if '0x6D' exist, then use this patch[usb] USB3_PRW 0x6D Skylake (instant wake)if not, use [usb] USB3_PRW 0x0D Skylake (instant wake)Click Compile and if you have any errors (warnings don’t matter) clear them by using the patching guide above. Save the file as: DSDT.aml and file format: ACPI Machine Language Binary.SSDT patches: Open SSDT-2.dsl:Search for ‘GFX0’ and replace all with ‘IGPU’Click Compile and if you have any errors (warnings don’t matter) clear them by using the patching guide above. Save the file as: SSDT-2.aml and file format: ACPI Machine Language BinaryOpen SSDT-3.dsl:Search for ‘GFX0’ and replace all with ‘IGPU’Click Compile and if you have any errors (warnings don’t matter) clear them by using the patching guide above. Save the file as: SSDT-3.aml and file format: ACPI Machine Language BinaryOpen SSDT-13.dsl:Search for ‘GFX0’ and replace all with ‘IGPU’Click Compile and if you have any errors (warnings don’t matter) clear them by using the patching guide above. Save the file as: SSDT-13.aml and file format: ACPI Machine Language Binary" Send me Mohammed’s iMac.zip ORIGINAL ACPI FROM COVER.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 25, 2017 Share Posted May 25, 2017 Check DSDT.modaifallah1.zip for disable nvidia, i need ioreg after reboot extract ioreg for me and post here IORegistryExplorer.app.zip 1 Link to comment Share on other sites More sharing options...
modaifallah1 Posted May 25, 2017 Share Posted May 25, 2017 Using your custom dsdt made it not booting anymore. It stops at some line on -v then gives prohibited sign. It is not loading from SSD as normal as the ssd LED is not lightning. Here is the IOReg file and I will attach the screen at which boots stops. Thanks a lot you're my hero ! You're the only one helping me in the hackintosh community IOREG: Mohammed’s iMac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 25, 2017 Share Posted May 25, 2017 post ur full clover folder here Link to comment Share on other sites More sharing options...
modaifallah1 Posted May 25, 2017 Share Posted May 25, 2017 **Update: I fixed sound using this excellent guide : https://www.reddit.com/r/hackintosh/comments/4sil5p/audio_mechanic_old_patchfix_removal_applealc/ It is noob-friendly HAHAHAHAH Here is the full clover folder: CLOVER.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 25, 2017 Share Posted May 25, 2017 Boot with DSDT or fail? Link to comment Share on other sites More sharing options...
modaifallah1 Posted May 25, 2017 Share Posted May 25, 2017 Boot with DSDT or fail? It fails... I have to go Clover options everytime to rename DSDT file to something else so that it doesn't the one you gave me. Btw there is a guide that helped me use app store, imessages .. else called An Idiot's guide to iMessage. Everything now is perfect except for brightness, touchpad, and fn keys please help me fix those 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 25, 2017 Share Posted May 25, 2017 1- Replace folder CLOVER.zip 2- Update Clover Clover_v2.4k_r4078.pkg.zip 3- Reboot send me new ioreg after reboot IORegistryExplorer.app.zip Link to comment Share on other sites More sharing options...
modaifallah1 Posted May 25, 2017 Share Posted May 25, 2017 Booting, battery percentage showing, but keyboard not working in addition to the previous non functional TouchPad can't login to test brightness. Can you just do what you did except for PS2 leave it as it is? I can use usb mouse nicely but keyboard is essential :'( Can't thank you enough <3 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 25, 2017 Share Posted May 25, 2017 remove ApplePS2SmartTouchPad.kext and put it VoodooPS2Controller.kext.zip send me one ioreg IORegistryExplorer.app.zip Link to comment Share on other sites More sharing options...
modaifallah1 Posted May 25, 2017 Share Posted May 25, 2017 Will send the ioreg in 10 minutes. I will boot to Windows first to replace the ps2 kext from clover 1 Link to comment Share on other sites More sharing options...
modaifallah1 Posted May 25, 2017 Share Posted May 25, 2017 Here is the ioreg: Now keyboard works again... and also brightness! Fn keys don't work yet but using an app called Keyboard Maestro I assigned the specific keys to volume and brightness so now I can use them easily Last thing is the touchpad.. Plz ! Here is the ioreg:iMac.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted May 25, 2017 Share Posted May 25, 2017 u enable touchpad in System Preferences? replace DSDT in Clover/Acpi/Patched and reboot DSDT.03.zip use smbios MacBookPro13,1 not iMac17,1 Link to comment Share on other sites More sharing options...
modaifallah1 Posted May 25, 2017 Share Posted May 25, 2017 I'm just too lazy to get a new serial number to use app store xD Okay will replace and do it now. will report back ASAP Thank you very much <3 Ramadan Kareem u enable touchpad in System Preferences? replace DSDT in Clover/Acpi/Patched and reboot DSDT.03.zip use smbios MacBookPro13,1 not iMac17,1 Changed SMBIOS, replaced DSDT .. touchpad still not detected in settings and sound stopped working Here is an updated IOREG in case you need it MacBook Pro.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts