Jump to content

[Guide] Catalina / BigSur / Monterey on mobos Serie 100 / 200 / 300 / 400 / 500 / 600 SkyLake / KabyLake / CoffeeLake / CometLake / RocketLake / AlderLake DSDT


MaLd0n
5,455 posts in this topic

Recommended Posts

L/E

drwxr-xr-x   3 root  wheel   102  8 ago  2017 AHCI_Intel_Generic_SATA.kext
drwxr-xr-x@  3 root  wheel   102  6 jun  2015 AppleIntelE1000e.kext
drwxr-xr-x@  3 root  wheel   102 12 ago  2015 AtherosE2200Ethernet.kext
drwxr-xr-x   3 root  wheel   102 17 oct 16:52 FakeSMC.kext
drwxr-xr-x   3 root  wheel   102 17 oct 16:52 FakeSMC_ACPISensors.kext
drwxr-xr-x   3 root  wheel   102 17 oct 16:52 FakeSMC_CPUSensors.kext
drwxr-xr-x   3 root  wheel   102 17 oct 16:52 FakeSMC_GPUSensors.kext
drwxr-xr-x   3 root  wheel   102 17 oct 16:52 FakeSMC_LPCSensors.kext
drwxr-xr-x   3 root  wheel   102 20 jul  2017 IntelMausiEthernet.kext
drwxr-xr-x@  3 root  wheel   102 11 nov 22:01 Lilu.kext
drwxr-xr-x@  3 root  wheel   102 22 oct 13:45 NvidiaGraphicsFixup.kext
drwxr-xr-x@  3 root  wheel   102 30 jul  2015 RealtekRTL8111.kext
drwxr-xr-x   3 root  wheel   102 14 dic 17:40 USBInjectAll.kext
drwxr-xr-x   3 root  wheel   102 23 feb  2017 XHCI-200-series-injector.kext
drwxr-xr-x   3 root  wheel   102 18 abr  2017 realtekALC.kext

S/L/E

drwxr-xr-x@   3 root  wheel    102  7 oct 19:11 ACPISensors.kext
drwxr-xr-x@   3 root  wheel    102  7 oct 19:11 CPUSensors.kext
drwxr-xr-x@   3 root  wheel    102  7 oct 19:11 FakeSMC.kext.bak
drwxr-xr-x@   3 root  wheel    102  7 oct 19:11 GPUSensors.kext


Use kext in one folder only, or Clover/Kexts/Other or Library/Extensions or System/Library/Extensions

and use only necessary kexts, u have a collection

  • Like 1
Link to comment
Share on other sites

attachicon.gifCLOVER.zip

attachicon.gifCLOVER.zip

 

send me new ioreg from Notebook, need apply more xD

Thank you very much for your help. I started using the clover folder you sent me and everything works ok. I have a question, how do I configure my USB ports correctly. I ask because in USBnject all kext webpage, the author says that the kext by itself (without proper configuration) is just a temporary "fix", and he advises to "properly configure" all the ports in order to continue using the kext without problems. How do I "properly" configure my USB ports for using "the correct way" with USBInject all kext?

Again, thanks for all your help.

  • Like 1
Link to comment
Share on other sites

U need test all ports with one USB Stick e.g

Don't need SSDTs, for USB use flag uia_exclude=XXXX

 
EXAMPLE
 
Unused Ports, uxcluded with flag
uia_exclude=HS01;HS02;HS03;HS04;HS05;HS06;HS10;HS11;SSP1;SSP2;SSP6
 
Used Ports
HS07, HS08, HS09, HS12, HS13, HS14, SSP3, SSP4, SSP5
 
put usb stick in port, open ioreg and check what port appears... ;)
  • Like 1
Link to comment
Share on other sites

let's go

replace folder, reboot and send me new ioreg

attachicon.gifCLOVER.zip

 

 

ok, I'm on the notebook ...

using your Clover folder I have a kernel panic. I had to make a video to understand what is the cause, I am attaching this frame, you are able to understand what it depends on?

post-609588-0-03544500-1519064968_thumb.png

  • Like 1
Link to comment
Share on other sites

Hi Mald0n 

Here my zip file! I don`t know if Audio is still right configured. I'm just using a extern interface!! 

After a sleep:

"USB device disabled. unplug the device using too much power to re-enable usb devices"

on the console:

kernel[0]: 035766.910192 AppleUSBXHCIPCI@00000000: AppleUSBHostController::setPowerStateGated: going to state 1 returned 0xe00002e9
kernel[0]: *** kernel exceeded 500 log message per second limit  -  remaining messages this second discarded ***
 

Thx in advance  for your support.

Send me Morbillos-iMac.home.zip

  • Like 1
Link to comment
Share on other sites

L/E

drwxr-xr-x   3 root  wheel   102  8 ago  2017 AHCI_Intel_Generic_SATA.kext
drwxr-xr-x@  3 root  wheel   102  6 jun  2015 AppleIntelE1000e.kext
drwxr-xr-x@  3 root  wheel   102 12 ago  2015 AtherosE2200Ethernet.kext
drwxr-xr-x   3 root  wheel   102 17 oct 16:52 FakeSMC.kext
drwxr-xr-x   3 root  wheel   102 17 oct 16:52 FakeSMC_ACPISensors.kext
drwxr-xr-x   3 root  wheel   102 17 oct 16:52 FakeSMC_CPUSensors.kext
drwxr-xr-x   3 root  wheel   102 17 oct 16:52 FakeSMC_GPUSensors.kext
drwxr-xr-x   3 root  wheel   102 17 oct 16:52 FakeSMC_LPCSensors.kext
drwxr-xr-x   3 root  wheel   102 20 jul  2017 IntelMausiEthernet.kext
drwxr-xr-x@  3 root  wheel   102 11 nov 22:01 Lilu.kext
drwxr-xr-x@  3 root  wheel   102 22 oct 13:45 NvidiaGraphicsFixup.kext
drwxr-xr-x@  3 root  wheel   102 30 jul  2015 RealtekRTL8111.kext
drwxr-xr-x   3 root  wheel   102 14 dic 17:40 USBInjectAll.kext
drwxr-xr-x   3 root  wheel   102 23 feb  2017 XHCI-200-series-injector.kext
drwxr-xr-x   3 root  wheel   102 18 abr  2017 realtekALC.kext

S/L/E

drwxr-xr-x@   3 root  wheel    102  7 oct 19:11 ACPISensors.kext
drwxr-xr-x@   3 root  wheel    102  7 oct 19:11 CPUSensors.kext
drwxr-xr-x@   3 root  wheel    102  7 oct 19:11 FakeSMC.kext.bak
drwxr-xr-x@   3 root  wheel    102  7 oct 19:11 GPUSensors.kext


Use kext in one folder only, or Clover/Kexts/Other or Library/Extensions or System/Library/Extensions

and use only necessary kexts, u have a collection

 

Thank'u so much, my sytem is now at 100%.

  • Like 1
Link to comment
Share on other sites

ok, I'm on the notebook ...

using your Clover folder I have a kernel panic. I had to make a video to understand what is the cause, I am attaching this frame, you are able to understand what it depends on?

remove DSDT and check if work

if work we edit again

Hi Mald0n 

 

Here my zip file! I don`t know if Audio is still right configured. I'm just using a extern interface!! 

After a sleep:

"USB device disabled. unplug the device using too much power to re-enable usb devices"

on the console:

kernel[0]: 035766.910192 AppleUSBXHCIPCI@00000000: AppleUSBHostController::setPowerStateGated: going to state 1 returned 0xe00002e9
kernel[0]: *** kernel exceeded 500 log message per second limit  -  remaining messages this second discarded ***
 

Thx in advance  for your support.

CLOVER.zip

Thank'u so much, my sytem is now at 100%.

welcome

  • Like 1
Link to comment
Share on other sites

remove DSDT and check if work

if work we edit again

attachicon.gifCLOVER.zip

welcome

no...

 

does not start in any way, I also tried to remove extensions and clover flags. Using the old folder Clover (which I enclose) once started from the stick, the second attempt to boot in kernel panic as you can see from the picture that I attach.

can it be something related to the msr patch?

post-609588-0-75559700-1519069457_thumb.jpeg

CLOVER.zip

  • Like 1
Link to comment
Share on other sites

no...

 

does not start in any way, I also tried to remove extensions and clover flags. Using the old folder Clover (which I enclose) once started from the stick, the second attempt to boot in kernel panic as you can see from the picture that I attach.

can it be something related to the msr patch?

try it

change H_EC to EC
485f4543 
45435f5f 

Thx. I replace clover dir with yours.

But Just a question is this for El capitan??????

on ioregistry explorer there are any red port but after a wake up the console begin to report

u have thunderbolt?

MaLd0n 2018-02-19 às 18.22.42.jpg

  • Like 2
Link to comment
Share on other sites

 

 

On board there is a port but nothing is plugged on!!!

 

USB port used 2x 2.0 :

  1. Hub with mouse and keyboard
  2. Audio interface

I've also noticed a rise in temperature after 1st awake. I think this is related tho the usb power issue 

 

Sorry, but again : i'm running on el capitan (just cause the topic) are the settings right?

 

big respect for the great contribute you made to the osx community 

 

thx

  • Like 1
Link to comment
Share on other sites

On board there is a port but nothing is plugged on!!!

 

USB port used 2x 2.0 :

  1. Hub with mouse and keyboard
  2. Audio interface

I've also noticed a rise in temperature after 1st awake. I think this is related tho the usb power issue 

 

Sorry, but again : i'm running on el capitan (just cause the topic) are the settings right?

 

big respect for the great contribute you made to the osx community 

 

thx

no problem

in log is XHC2, XHC2 is a usb c inside RP05/PXSX

try create a SSDT for power management and check if solve

ssdtPRGen.command.zip

  • Like 1
Link to comment
Share on other sites

Many thanks for your reply MaLdOn.

 

I replaced my clover with the one you sent me. Everything seems to work fine, however the shutdown problem is not fixed, it still reboots on its own after few secondes... 

Check and see if there's an ErP option in UEFI/BiOS that's disabled And enable that. It's usually under CPU Power Management or APM or something like that. I see that has fixed some Skylake systems with the same issue.
The other one to check is if you have a "Wake on LAN" option enabled as that's another known cause.
Link to comment
Share on other sites

 

Check and see if there's an ErP option in UEFI/BiOS that's disabled And enable that. It's usually under CPU Power Management or APM or something like that. I see that has fixed some Skylake systems with the same issue.
The other one to check is if you have a "Wake on LAN" option enabled as that's another known cause.

 

 

 

I tried this before, but I just gave it a second go ; either S4+S5, either S5 but it doesn't make any difference.

 

As for the wake on lan, it is disabled.

 

I thought it could come from USB devices (I have only 1 webcam and 1 Logitech  unifying receiver for keyboard + mouse connected), so I tried to start/shotdown without them, but no difference neither... Really frustrating issue!

  • Like 1
Link to comment
Share on other sites

I tried this before, but I just gave it a second go ; either S4+S5, either S5 but it doesn't make any difference.

 

As for the wake on lan, it is disabled.

 

I thought it could come from USB devices (I have only 1 webcam and 1 Logitech  unifying receiver for keyboard + mouse connected), so I tried to start/shotdown without them, but no difference neither... Really frustrating issue!

try with only mouse and keyboard connect

Link to comment
Share on other sites

try with only mouse and keyboard connect

 

Did this also, one at a time or both, nothing changed.

 

The last thing I can think of would be my memory, as it is the only "exotic" part I have. I am expat in a "non-standard" place, where computer parts are not available like everywhere else and shipping from Europe or US is not an option, and the only Corsair PC3200 available as the time I did my build was RGB. Could it be the reason?

  • Like 1
Link to comment
Share on other sites

Did this also, one at a time or both, nothing changed.

 

The last thing I can think of would be my memory, as it is the only "exotic" part I have. I am expat in a "non-standard" place, where computer parts are not available like everywhere else and shipping from Europe or US is not an option, and the only Corsair PC3200 available as the time I did my build was RGB. Could it be the reason?

i think no, the problçem appears in many hacks in all foruns

run it again and send me files, i'll check log, etc

RunMe.app.zip

Link to comment
Share on other sites

hello MaLd0n

or installed High Sierra on these components:

 

Cpu i7 6600K

Asus Maximus viii Hero

8+8 DDR4 2400Mhz

Gigabayte RX560 2Gb.

 

can you check whether or not the efi is created well and more?

thank you.

CLOVER.zip

No MaLdOn, no success, same thing. It's running fine, but it does not fix the shutdown issue

bad

Link to comment
Share on other sites

Hi Guys,

 

Any advice for a budget boards that works well both for Coffee Lake & Kaby Lake?

Any CPu where integrated graphics work well with minimal hassle?

Thanks in advance.

serie 100 or 200 for Kabylake

serie 300 for coffeelake

 

i think for coffeelake only serie 300 work

 

Intel 620 and 630 work good

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...